SERIES
-
PIN CENTERS
-
NO. PINS PER ROW
-
LEAD STYLE
-
TSW
= Standard Strip
HTSW
= Hi-Temp Strip
–1
= .100" (2.54 mm) Centers,
(All positions lled)
–2
= .200" (5.08 mm) Centers,
(Every other position lled)
01 thru 50
= .100" (2.54 mm)
Center Version
02 thru 25
= .200" (5.08 mm)
Center Version
Specify
LEAD STYLE
from chart
SPECIFICATIONS
TSW/HTSW
Board Mates:
SSW, SSQ, SSM, ESW, ESQ,
BCS, BSW, CES, SLW
Cable Mates:
IDSD, IDSS
Insulator Material:
TSW: PBT
HTSW: Natural LCP
Terminal Material:
Phosphor Bronze
Plating:
Au or Sn over 50 µ" (1.27 µm) Ni
Operating Temp Range:
-55 °C to +125 °C with Gold
-55 °C to +105 °C with Tin
Voltage Rating:
550 VAC mated with SSW;
500 VAC mated with
BCS or ESQ;
450 VAC -RA/-RE mated with
BCS or SSM
400 VAC mated with CES
Lead–Free Solderable:
HTSW: Yes
TSW: No, Lead Wave Only
Other Platings
(MOQ Required)
Elevated Right-angle option
Shunts
ALSO AVAILABLE
OTHER SOLUTIONS
STRAIGHT PIN VERSIONS
LEAD
STYLE
A B C
*–05 (8.51) .335 (3.30) .130 (2.67) .105
*– 06 (7.62) .300 (2.41) .095 (2.67) .105
*– 07 (10.92) .430 (2.54) .100
(5.84) .230
*– 08 (13.46) .530 (5.08) .200
– 09 (18.54) .730 (10.16) .400
–10 (21.08) .830 (12.70) .500
–11 (23.62) .930 (15.24) .600
–12 (26.16) 1.030 (17.78) .700
–13 (31.24) 1.230 (22.86) .900
–14 (13.46) .530
(2.79) .110
(8.13) .320
*–15
(18.54) .730
(13.21) .520
*–16 (7.87) .310 (8.13) .320
*–17 (21.08) .830
(2.79) .110
(15.74) .620
*–18 (23.62) .930 (18.29) .720
* Available with –LL (Locking Lead) Option
Specify -07 for best mate with IDXX Series IDC Cable
Note:
Some lengths, styles and
options are non-standard,
non-returnable.
CURRENT RATING
(PER PIN)
TSW mated with
ESW SSW SLW SSQ SSM BCS SNT
5.2 A 5.7 A 5.2 A 6.3 A 5.2 A 4.6 A 4.3 A
2 POSITIONS POWERED
HTSW
Straight Pin Versions
TSW
–S
–D
–T
–Q
STRAIGHT PIN VERSIONS
LEAD
STYLE
A B C
*–19 (26.16) 1.030
(2.79) .110
(20.83) .820
*– 20 (31.24) 1.230 (25.91) 1.020
*– 21 (36.32) 1.430 (2.79) .110 (30.99) 1.220
*– 22 (16.00) .630 (7.62) .300
(5.84) .230
*– 23 (11.30) .445
(2.92) .115
*– 24 (12.15) .480 (6.73) .265
*– 25 (16.00) .630 (5.33) .210 (8.13) .320
– 26 (11.58) .456 (3.20) .126
(5.84) .230– 27 (33.78) 1.330 (25.40) 1.000
– 28 (28.70) 1.130 (20.32) .800
– 29 (33.78) 1.330 (23.11) .910
(8.13) .320
– 30 (28.70) 1.130 (18.03) .710
+– 41 (9.27) .365 (0.89) .035 (5.84) .230
+– 42 (11.94) .470 (1.27) .050 (8.13) .320
+
▲
Style –41 & –42 available with HTSW only.
Except: Style –26 (0.46) .018 DIA Tail
▲
(2.54 mm) .100" PITCH • TSW/HTSW SERIES
samtec.com?TSW or samtec.com?HTSW
Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specications which are subject to change without notice.
THROUGH-HOLE
.025" SQ POST HEADER
(2.54) .100 x No. of Positions
(2.54)
.100
(5.08)
.200
(7.62)
.300
(5.02)
.198
(2.48)
.098
(7.62)
.300
(7.56)
.298
(7.56)
.298
B
C
A
B
C
B
C
B
C
A
A
A
F-221
