Philips Engineering Solutions

Thanks Philips Engineering Solutions 🇳🇱 🇦🇹 🇩🇪 for visiting us today at the Impulse in Amberg! Exhanging ideas on #simulation, #IT2OTintegration and #energymanagment after visiting our lighthouse electronics factory 🏭 was a real treat 🎁 Bas Dijkmann Hans Peter Rammel Arjen van Barneveld Jeroen de Jong Vreni Loewen let’s reconnect 🤝

What is needed to bring R&D prototypes through the 'valley of death', into commercial volume ramp-up? That was the topic of the presentation of our Head of Process Development Joost van Beek during the Leti Innovation Days in Grenoble.    He shared various examples of MEMS manufacturing for bio-medical applications, such as cell-sorting, neural probing, micro optical tomography and ultrasound imaging. Interested to learn more about how the Philips MEMS Foundry can be your partner for medium volume custom MEMS manufacturing? Check out our website: https://lnkd.in/eSM5YGvb #LetiDays CEA-Leti

What is needed to bring R&D prototypes through the 'valley of death', into commercial volume ramp-up? That was the topic of the presentation of our Head of Process Development Joost van Beek during the Leti Innovation Days in Grenoble.    He shared various examples of MEMS manufacturing for bio-medical applications, such as cell-sorting, neural probing, micro optical tomography and ultrasound imaging. Interested to learn more about how the Philips MEMS Foundry can be your partner for medium volume custom MEMS manufacturing? Check out our website: https://lnkd.in/eSM5YGvb #LetiDays CEA-Leti

Are you joining the 𝗟𝗲𝘁𝗶 𝗜𝗻𝗻𝗼𝘃𝗮𝘁𝗶𝗼𝗻 𝗗𝗮𝘆𝘀 in Grenoble?    🎙️ Don't miss the talk by our colleague Joost van Beek. He will elaborate on MEMS manufacturing for various bio-medical applications, such as cell-sorting, neural probing, micro optical tomography and ultrasound imaging. .   ☕️ Meet Joost and Erik Corduwener for a cup of coffee, to learn why Philips MEMS Foundry is your best partner for medium volume custom MEMS manufacturing. #LetiDays @CEA-Leti

𝗖𝗿𝗲𝗮𝘁𝗶𝗻𝗴 𝟯𝗗 𝘀𝗵𝗮𝗽𝗲𝘀 𝗼𝘂𝘁 𝗼𝗳 𝗜𝗖 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆 Is it possible to create 3D shapes – from boxes to tubes - out of IC technology, in extremely small form factor? Yes, it is, with Flex-to-rigid (F2R). This high-precision micro-assembly platform makes use of ultra-thin embedded electrical interconnects, that are able to bend (minimum radius: 20-50 μm). F2R was developed to bring complex electronic imaging functionality to the tip of smart catheters and guide wires. It is, however, just as fit for many other applications that make use of multiple electronic components. You won’t believe it until you see it 👀: https://lnkd.in/gprVeQgK

Since 1984, participants of the Hilton Head Workshop have been looking ahead to the challenges and possibilities of MEMS technology. Our colleagues Paul Bekkers and Joost van Beek are currently joining the 40th anniversary edition, connecting with the brightest minds in MEMS. This workshop covers a wide range from cutting edge applied academic research to real-world MEMS industrialization.

Some of the most groundbreaking inventions are discovered by accident. Or they come out of what was considered to be a failure. Six years ago, the result of a ‘failed’ experiment ended up in the drawer. Researchers Marta Saccher (Delft University of Technology) and Shin Kawasaki Ph.D. (Holst Centre) recently succeeded in turning it into a pre-charged CMUT that can operate without an external bias. “This is a very important step towards using CMUT for in-body devices. In a couple of years, we might even be able to use this technology to power heart implants.” Read more: https://lnkd.in/e-Sm7qGS

The forefront of microtechnology at the waterfont.   Colleagues Joost van Beek and Paul Bekkers will attend the workshop and (re)connect with customers, partners and key opinion leaders at the forefront of MEMS technology.

📢 So excited to announce the successful kick-off of our EU project UNLOOC in Jena, Germany! 🤩 On 14.05.2024, the UNLOOC project took place with a dynamic kick-off event hosted by microfluidic ChipShop GmbH. Joined by 50 partners from 8 EU countries, we're set to revolutionize drug discovery with tiny Organ-on-Chip models. From enlightening presentations to engaging discussion groups and workshops, we immersed ourselves into the potential of Organ-on-Chip systems. And of course, what's a gathering in Thuringia without indulging in some mouthwatering Thüringer Bratwurst? 🌭The festivities continued with a delightful dinner at Paradiespark, where we even showcased our dance moves! 💃🕺   UNLOOC aims to unlock the data content of Organ-on-Chips, aiming at targeted drug development without adverse side effects. By harnessing microfluidics, advanced sensors, and cutting-edge microscopy, we're ready to transform the future of medicine. But we're not stopping there! With a focus on standardization and collaboration, we're paving the way for widespread adoption of Organ-on-Chip technology.   🔬Are you curious to learn more about our project and how you can get involved? Drop us a message or visit our website for more details (launched soon).   🤩 Huge thanks to our project coordinator microfluidic ChipShop & every single partner who made this kick-off a resounding success: AbbVie, AlveoliX BEONCHIP, Carl Zeiss Microscopy GmBh, Core Life Analytics, CSEM Centre Suisse D'Electronique Et De Microtechnique Sa - Recherche Et Development, Cytes Biotechnologies S.L., Demcon Curonix, Demcon life sciences & health, Demcon Sync Biosystems, Ebers Medical Technology, Energiatudományi Kutatóközpont, EUROPEAN INFRASTRUCTURE OF OPEN SCREENING PLATFORMS FOR CHEMICAL BIOLOGY EUROPEAN RESEARCH INFRASTRUCTURE CONSORTIUM (EU-OPENSCREEN ERIC) - EU-OPENSCREEN ERIC, Fraunhofer-Gesellschaft, FUNDACIO INSTITUT DE BIOENGINYERIA DE CATALUNYA, FUNDACION DE LA COMUNIDAD VALENCIANA CENTRO DE INVESTIGACION PRINCIPE FELIPE, FUNDACION INSTITUTO DE INVESTIGACION SANITARIA ARAGON, HES-SO Haute école spécialisée de Suisse occidentale, I+Med, IHS WEIGLING SL, InSphero , INESC Instituto de Engenharia de Sistemas e Computadores, Institutul National de Cercetaredezvoltare pentru Microtehnologie, Interuniversity MicroElectronics Center IMEC, Jobst Technologies GmbH - an IST AG company, Lionix International, Lipotype, Locsense, Micronit, Multi Channel Systems GmbH, Nederlandse Organisatie voor toegepast-natuurwetenschappelijk onderzoek TNO, Nuromedia GmbH, Okolab, OST – Eastern Switzerland University of Applied Sciences, Philips, S.C. DDS Diagnostic, SiliconGate lda, Spiden, Stelar Security Technology Law Research UG, Stichting IMEC Nederland, Technische Universität Braunschweig, Delft University of Technology, Universidad de Santiago de Compostela Maastricht University, University College Cork, University of Pavia, Viscofan Spain, Spinverse. #UNLOOC #Jena #EUProject #KickOffSuccess

𝗠𝗼𝗻𝗶𝘁𝗼𝗿𝗶𝗻𝗴 𝗽𝗮𝘁𝗶𝗲𝗻𝘁𝘀 𝗶𝗻 𝗿𝗲𝗮𝗹-𝘁𝗶𝗺𝗲 𝘂𝘀𝗶𝗻𝗴 𝗖𝗠𝗨𝗧 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆 ORCASONICS INNOVATION is revolutionizing medical wearables; their ultrasound patch measures echocardiography and hemodynamics signals. Thanks to CMUT technology: ✅ The patch continuously acquires images in real-time video ✅ The quality of images is very high ✅ The energy consumption is low, so a patch can last a long time and its temperature doesn’t rise “Together with Philips MEMS Foundry we have been able to enforce the technology to move forward”, said Mati Shirizly. Read the interview with the CEO & CTO of Orcasonics: https://lnkd.in/eUHydd-D