SparkFun QwiicBus Hookup Guide
Contributors:
El Duderino, 
Englandsaurus
El Duderino, Englandsaurus 
Resources and Going Further
Now that you have your QwiicBus set up and configured to your liking, it's time to start creating some I2C device networks! For more information, take a look at the following links:
QwiicBus EndPoint Links
- Schematic (PDF)
- Eagle Files (ZIP)
- Dimensional Drawing (PNG)
- PCA9615 Datasheet (PDF)
- Hardware GitHub Repository
QwiicBus MidPoint Links
- Schematic (PDF)
- Eagle Files (ZIP)
- Dimensional Drawing (PNG)
- LMR33630 Datasheet (PDF)
- Hardware GitHub Repository
Read more about Farmhand's QwiicBus story and other agriculture tech projects from SparkFun in the following links:
- Farmhand: Building a Custom Solution for Farming
- SparkFun Agriculture Tech Landing Page
- Precision Agriculture and Evironmental Monitoring Technology Blog Post
For inspiration for your I2C project using the QwiicBus, check out the following tutorials:
Hookup Guide for the SparkFun RedBoard Artemis
Get started with the RedBoard Artemis - all the functionality of the SparkFun Artemis module wrapped in the familiar Uno R3 footprint
Basic Autonomous Kit for Sphero RVR Assembly Guide
Get your Basic Autonomous Kit for Sphero RVR all hooked up with this guide!
Secure DIY Garage Door Opener
Did you know that most garage doors are at risk of a roll jam attack? Here we make a DIY garage door remote-control system that is much more secure than most commercial-ready products using the latest in ECC cryptography.
Artemis Global Tracker Hookup Guide
The SparkFun Artemis Global Tracker combines the Artemis processor with an Iridium 9603N satellite transceiver, ZOE-M8Q GNSS transceiver, and MS8607 PHT sensor. With a clear view of the sky, this board allows you to send and receive short data messages from anywhere in the world including remote locations far beyond the reach of WiFi and GSM networks. Follow this guide to get started with the Artemis Global Tracker.