SparkFun Arduino ProtoShield Hookup Guide
Contributors:
bboyho
bboyho 
Resources and Going Further
Now that you've successfully got your protoshield for Arduino up and running, it's time to incorporate it into your own project!
For more information, check out the resources below:
- Schematic (PDF)
- Eagle Files (ZIP)
- GitHub Repo
- SparkFun Product Showcase: SparkFun ProtoShield Kit
- RN-42 and RN-41 Command Reference and User’s Guide (PDF)
Need some inspiration for your next project? Check out some of these related tutorials:
8-Pin SOIC to DIP Adapter Hookup Guide
Assembly and application of the 8-pin SOIC-to-DIP adapter.
Proto Pedal Example: Programmable Digital Pedal
Building a pedal around the Teensy 3.2 and Teensy Audio shield. Changing the effect in the pedal is as easy as uploading a new sketch!
Qwiic MUX Hookup Guide
Have a bunch of sensors with the same I2C address? Put them on the Qwiic MUX (TCA9548A) to get them all talking on the same bus!
SparkFun Qwiic GPIO Hookup Guide
Add up to 8 extra I/O pins to your microcontroller with the SparkFun Qwiic GPIO. Get started with the Qwiic GPIO in this Hookup Guide.