Simultaneous RFID Tag Reader Hookup Guide
Contributors:
Nate
Nate 
Resources and Going Further
For additional help with this project, please check out the following resources.
- M6E-NANO Design Guide- technical information about the module.
- EPC and RFID standards - set by GS1, the governing body behind RFID (and barcodes too!)
- RFID V2.0.1 Protocol
- ThingMagic App Note - Documentation for running the Mercury API on an Arduino Mega.
- SparkFun Simultaneous RFID Tag Reader Arduino Library Repository - Arduino Library files
- GitHub Hardware Repository - Hardware design files
- Eagle Files - .ZIP download of the schematic and board files
We hope you enjoyed reading this tutorial! Have fun with your RFID projects! If you need more inspiration, check out these other tutorials from SparkFun:
Blynk Board Arduino Development Guide
How to get your computer set up with Arduino and the Blynk Board hardware definitions -- so you can start creating Blynk projects of your own!
MicroMod Asset Tracker Carrier Board Hookup Guide
Get started with the SparkFun MicroMod Asset Tracker Carrier Board following this Hookup Guide. The Asset Tracker uses the u-blox SARA-R510M8S LTE-M / NB-IoT module to provide a host of data communication options.
Getting Started with the DA16200 FreeRTOS SDK
Interested in the DA16200 FreeRTOS SDK? This guide covers setting up the SDK in the Eclipse IDE and how to program our boards with the DA16200 module.
Qwiic Kit for Raspberry Pi V2 Hookup Guide
Get started with the SGP40, BME280, VCNL4040, and microOLED via I2C using the Qwiic system and Python on a Raspberry Pi! Measure VOC Index, light, temperature, humidity, and pressure from the environment. Then display them on the microOLED, serial terminal, or the cloud with Cayenne!
Interested in more RFID?
We've got a page just for you! Get an overview of the basics of how RFID works, the hardware needed and tutorials to get you started.