विभिन्न प्रकार के संधारित्र

विभिन्न प्रकार के नियत मान वाले संधारित्र

संधारित्रों का वर्गीकरण प्राय: उनके निर्माण में प्रयुक्त डाइएलेक्ट्रिक पदार्थ के आधार पर किया जाता है। डाइएलेक्ट्रिक भी दो प्रकार के होते हैं - बल्क कुचालक (Bulk insulators) एवं धातु-आक्साइड के फिल्म (इन्हें 'विद्युत-अपघट्य संधारित्र' भी कहते हैं)। इसी प्रकार, संधारित्र नियत मान वाले (fixed) हो सकते हैं या परिवर्ती मान वाले (variable).

ट्यूब-रिसिवरों में ट्यूनिंग के लिये प्रयुक्त परिवर्ती-मान वाला संघनित्र

संधारित्र में प्रयुक्त विभिन्न डाइएलेक्ट्रिक

• वायु (Air-gap)
• सिरामिक (Ceramic)
• गिमिक (Gimmick): these capacitors are made by twisting together 2 pieces of insulated wire. Values usually range from 3 pF to 15 pF. Usually used in homemade VHF circuits for oscillation feedback.
• ट्रिमर (Trimmer): these capacitors have a rotating plate (which can be rotated to change the capacitance) separated from a fixed plate by a dielectric medium. Typically values range from 5 pF to 60 pF.
• कांच (Glass): used to form extremely stable, reliable capacitors.
• कागज (Paper): common in antique radio equipment, paper dielectric and aluminum foil layers rolled into a cylinder and sealed with wax. Low values up to a few μF, working voltage up to several hundred volts, oil-impregnated bathtub types to 5 kV used for motor starting and high-voltage power supplies, and up to 25 kV for large oil-impregnated energy discharge types.
• पॉलीकार्बोनेट: good for filters, low temperature coefficient, good aging, expensive.
• पॉलीस्टर, (PET film): (from about 1 nF to 10 μF) signal capacitors, integrators.
• पॉलीस्टरीन (Polystyrene): (usually in the picofarad range) stable signal capacitors.
• पॉलीप्रोपीलीन (Polypropylene): low-loss, high voltage, resistant to breakdown, signal capacitors.
• पीटीएफई or टेफ्लॉन: higher performing and more expensive than other plastic dielectrics.
• सिल्वर माइका: These are fast and stable for HF and low VHF RF circuits, but expensive.
• विद्युत अपघट्य संधारित्र: have a larger capacitance per unit volume than other types, making them valuable in relatively high-current and low-frequency electrical circuits, e.g. in power-supply filters or as coupling capacitors in audio amplifiers. High-capacity electrolytics, also known as supercapacitors or ultracapacitors, have applications similar to those of rechargeable batteries, e.g. in electrically powered vehicles.
• प्रिन्टेड सर्किट बोर्ड: metal conductive areas in different layers of a multi-layer printed circuit board can act as a highly stable capacitor. It is common industry practice to fill unused areas of one PCB layer with the ground conductor and another layer with the power conductor, forming a large distributed capacitor between the layers, or to make power traces broader than signal traces.
• In integrated circuits, small capacitors can be formed through appropriate patterns of metallization on an isolating substrate.
• निर्वात: vacuum variable capacitors are generally expensive, housed in a glass or ceramic body, typically rated for 5-30 kV. Typically used in high power RF transmitters because the dielectric has virtually no loss and is self-healing. May be fixed or adjustable.

अचर मान के संधारित्रों की तुलना (Fixed capacitor comparisons)

संधारित्र का प्रकार	प्रयुक्तडाइएलेक्ट्रिक	विशेषताएँ/अनुप्रयोग	कमियाँ
पत्र संधारित्र (Paper Capacitors)	Paper or oil-impregnated paper	Impregnated paper was extensively used for older capacitors, using wax, oil, or epoxy as an impregnant. Oil-Kraft paper capacitors are still used in certain high voltage applications. Has mostly been replaced by plastic film capacitors.	Large size. Also, paper is highly hygroscopic, absorbing moisture from the atmosphere despite plastic enclosures and impregnates. Absorbed moisture degrades performance by increasing dielectric losses (power factor) and decreasing insulation resistance.
Metalized Paper Capacitors	Paper	Comparatively smaller in size than paper-foil capacitors	Suitable only for lower current applications. Has been largely superseded by metalized film capacitors
PET film Capacitor	Polyester film	Smaller in size when compared to paper or polypropylene capacitors of comparable specifications. May use plates of foil, metalized film, or a combination. PET film capacitors have almost completely replaced paper capacitors for most DC electronic applications. Operating voltages up to 60,000 V DC and operating temperatures up to 125 °C. Low moisture absorption.	Temperature stability is poorer than paper capacitors. Usable at low (AC power) frequencies, but inappropriate for RF applications due to excessive dielectric heating.
Kapton Capacitor	Kapton polyimide film	Similar to PET film, but significantly higher operating temperature (up to 250 °C).	Higher cost than PET. Temperature stability is poorer than paper capacitors. Usable at low (AC power) frequencies, but inappropriate for RF applications due to excessive dielectric heating.
Polystyrene Capacitor	Polystyrene	Excellent general purpose plastic film capacitor. Excellent stability, low moisture pick-up and a slightly negative temperature coefficient that can be used to match the positive temperature co-efficient of other components. Ideal for low power RF and precision analog applications	Maximum operating temperature is limited to about +85 °C. Comparatively bigger in size.
Polycarbonate Plastic Film Capacitor	Polycarbonate	Superior insulation resistance, dissipation factor, and dielectric absorption versus polystyrene capacitors. Moisture pick-up is less, with about ±80 ppm temperature coefficient. Can use full operating voltage across entire temperature range (−55 °C to 125 °C)	Maximum operating temperature limited to about 125 °C.
Polypropylene Plastic Film Capacitors	Polypropylene	Has become the most popular capacitor dielectric. Extremely low dissipation factor, higher dielectric strength than polycarbonate and polyester films, low moisture absorption, and high insulation resistance. May use plates of foil, metalized film, or a combination. Film is compatible with self-healing technology to improve reliability. Usable in high frequency applications due to very low dielectric losses. Larger value and higher voltage types from 1 to 100 μF at up to 440 V AC are used as run capacitors in some types of single phase electric motors.	More susceptible to damage from transient over-voltages or voltage reversals than oil-impregnated Kraft paper for pulsed power energy discharge applications.
Polysulphone Plastic Film Capacitors	Polysulfone	Similar to polycarbonate. Can withstand full voltage at comparatively higher temperatures. Moisture pick-up is typically 0.2%, limiting its stability.	Very limited availability and higher cost
PTFE Fluorocarbon (TEFLON) Film Capacitors	Polytetra- fluoroethylene	Lowest loss solid dielectric. Operating temperatures up to 250 °C, extremely high insulation resistance, and good stability. Used in stringent, mission-critical applications	Large size (due to low dielectric constant), and higher cost than other film capacitors.
Polyamide Plastic Film Capacitors	Polyamide	Operating temperatures of up to 200 °C. High insulation resistance, good stability and low dissipation factor.	Large size and high cost.
Metalized Plastic Film Capacitors	Polyester or Polycarbonate	Reliable and significantly smaller in size. Thin metalization can be used to advantage by making capacitors "self healing".	Thin plates limit maximum current carrying capability.
Stacked Plate Mica Capacitors	Mica	Advantages of mica capacitors arise from the fact that the dielectric material (mica) is inert. It does not change physically or chemically with age and it has good temperature stability. Very resistant to corona damage	Unless properly sealed, susceptible to moisture pick-up which will increase the power factor and decrease insulation resistance. Higher cost due to scarcity of high grade dielectric material and manually-intensive assembly.
Metalized Mica or Silver Mica Capacitors	Mica	Silver mica capacitors have the above mentioned advantages. In addition, they have much reduced moisture infiltration.	Higher cost
Glass Capacitors	Glass	Similar to Mica Capacitors. Stability and frequency characteristics are better than silver mica capacitors. Ultra-reliable, ultra-stable, and resistant to nuclear radiation.	High cost.
Class-I Temperature Compensating Type Ceramic Capacitors	Mixture of complex Titanate compounds	Low cost and small size, excellent high frequency characteristics and good reliability. Predictable linear capacitance change with operating temperature. Available in voltages up to 15,000 volts	Capacitance changes with change in applied voltage, with frequency and with aging effects.
Class-II High dielectric strength Type Ceramic Capacitors	Barium titanate based dielectrics	Smaller than Class-I type due to higher dielectric strength of ceramics used. Available in voltages up to 50,000 volts.	Not as stable as Class-I type with respect to temperature, and capacitance changes significantly with applied voltage.
Aluminum Electrolytic Capacitors	Aluminum oxide	Very large capacitance to volume ratio, inexpensive, polarized. Primary applications are as smoothing and reservoir capacitors in power supplies.	Dielectric leakage is high, large internal resistance and inductance limits high frequency performance, poor low temperature stability and loose tolerances. May vent or burst open when overloaded and/or overheated. Limited to about 500 volts.
Lithium Ion Capacitors	Lithium ion	The lithium ion capacitors have a higher power density as compared to batteries and LIC’s are safer in use than LIB’s in which thermal runaway reactions may occur. Compared to electric double layer capacitor (EDLC), the LIC has a higher output voltage. They both have similar power densities, but energy density of an LIC is much higher.	New technology.
Tantalum Electrolytic Capacitors	Tantalum oxide	Large capacitance to volume ratio, smaller size, good stability, wide operating temperature range, long reliable operating life. Extensively used in miniaturized equipment and computers. Available in both polarized and unpolarized varieties. Solid tantalum capacitors have much better characteristics than their wet counterparts.	Higher cost than aluminum electrolytic capacitors. Voltage limited to about 50 volts. Explodes quite violently when voltage rating, current rating, or slew rates are exceeded, or when a polarized version is subjected to reverse voltage.
Electrolytic double-layer capacitors (EDLC) Supercapacitors	Thin Electrolyte layer and Activated Carbon	Extremely large capacitance to volume ratio, small size, low ESR. Available in hundreds, or thousands, of farads. A relatively new capacitor technology. Often used to temporarily provide power to equipment during battery replacement. Can rapidly absorb and deliver larger currents than batteries during charging and discharging, making them valuable for hybrid vehicles. Polarized, low operating voltage (volts per capacitor cell). Groups of cells are stacked to provide higher overall operating voltage.	Relatively high cost.
Alternating current oil-filled Capacitors	Oil-impregnated paper	Usually PET or polypropylene film dielectric. Primarily designed to provide very large capacitance for industrial AC applications to withstand large currents and high peak voltages at power line frequencies. The applications include AC motor starting and running, phase splitting, power factor correction, voltage regulation, control equipment, etc..	Limited to low frequency applications due to high dielectric losses at higher frequencies.
Direct current oil-filled capacitors	Paper or Paper-polyester film combination	Primarily designed for DC applications such as filtering, bypassing, coupling, arc suppression, voltage doubling, etc...	Operating voltage rating must be derated as per the curve supplied by the manufacturer if the DC contains ripple. Physically larger than polymer dielectric counterparts.
Energy Storage Capacitors	Kraft capacitor paper impregnated with electrical grade castor oil or similar high dielectric constant fluid, with extended foil plates	Designed specifically for intermittent duty, high current discharge applications. More tolerant of voltage reversal than many polymer dielectrics. Typical applications include pulsed power, electromagnetic forming, pulsed lasers, Marx generators, and pulsed welders.	Physically large and heavy. Significantly lower energy density than polymer dielectric systems. Not self-healing. Device may fail catastrophically due to high stored energy.
Vacuum Capacitors	Vacuum capacitors use highly evacuated glass or ceramic chamber with concentric cylindrical electrodes.	Extremely low loss. Used for high voltage high power RF applications, such as transmitters and induction heating where even a small amount of dielectric loss would cause excessive heating. Can be self-healing if arc-over current is limited.	Very high cost, fragile, physically large, and relatively low capacitance.

A 12 pF, 20 kV fixed vacuum capacitor

Two 8 μF, 525 V paper electrolytic capacitors in a 1930s radio.

• Images of different types of capacitors

संधारित्रों की धारिता तथा वोल्टेज-रेंज

संधारित्रों की धारिता तथा वोल्टता-परास

संधारित्रों का वर्ण-कूटन (कलर-कोडिंग)

मुख्य लेख: Electronic color code

Capacitors may be marked with 3 or more coloured bands or dots. 3-colour coding encodes most significant digit, second most significant digit, and multiplier. Additional bands have meanings which may vary from one type to another. Low-tolerance capacitors may begin with the first 3 (rather than 2) digits of the value. It is usually, but not always, possible to work out what scheme is used by the particular colours used. Cylindrical capacitors marked with bands may look like resistors.

Color		Significant digits	Multiplier	Capacitance tolerance	Characteristic	DC working voltage	Operating temperature	EIA/vibration
	Black	0	1	±20%	—	—	−55 °C to +70 °C	10 to 55 Hz
	Brown	1	10	±1%	B	100	—	—
	Red	2	100	±2%	C	—	−55 °C to +85 °C	—
	Orange	3	1,000	—	D	300	—	—
	Yellow	4	10,000	—	E	—	−55 °C to +125 °C	10 to 2000 Hz
	Green	5	—	±5%	F	500	—	—
	Blue	6	—	—	—	—	−55 °C to +150 °C	—
	Violet	7	—	—	—	—	—	—
	Grey	8	—	—	—	—	—	—
	White	9	—	—	—	—	—	EIA
	Gold	—	—	±0.5%*	—	1000	—	—
	Silver	—	—	±10%	—	—	—	—

*Or ±0.5 pF, whichever is greater.

बाहरी कड़ियाँ

• Spark Museum (von Kleist and Musschenbroek)
• Biography of von Kleist
• Modeling Dielectric Absorption in Capacitors
• A different view of all this capacitor stuff