Anisotropic in-plane dielectric and ferroelectric properties of tensile-strained BaTiO3 films with three different crystallographic orientations
Ræder, Trygve Magnus; Holstad, Theodor Secanell; Nylund, Inger-Emma; Glaum, Julia; Einarsrud, Mari-Ann; Meier, Dennis; Grande, Tor
Peer reviewed, Journal article
Published version
![Thumbnail](/https/ntnuopen.ntnu.no/ntnu-xmlui/bitstream/handle/11250/2730820/Raeder-2021-Anisotropic-in-plane-dielectric-and.pdf.jpg?sequence=6&isAllowed=y)
Åpne
Permanent lenke
https://hdl.handle.net/11250/2730820Utgivelsesdato
2021Metadata
Vis full innførselSamlinger
- Institutt for materialteknologi [2558]
- Publikasjoner fra CRIStin - NTNU [38678]
Sammendrag
Ferroelectric properties of films can be tailored by strain engineering, but a wider space for property engineering can be opened by including crystal anisotropy. Here, we demonstrate a huge anisotropy in the dielectric and ferroelectric properties of BaTiO3 films. Epitaxial BaTiO3 films deposited on (100), (110), and (111) SrTiO3 substrates were fabricated by chemical solution deposition. The films were tensile-strained due to thermal strain confirmed by the enhanced Curie temperature. A massive anisotropy in the dielectric constant, dielectric tunability, and ferroelectric hysteresis loops was observed depending on the in-plane direction probed and the orientation of the films. The anisotropy was low for (111) BaTiO3, while the anisotropy was particularly strong for (110) BaTiO3, reflecting the low in-plane rotational symmetry. The anisotropy also manifested at the level of the ferroelectric domain patterns in the films, providing a microscopic explanation for the macroscopic response. This study demonstrates that the properties of ferroelectric films can be tailored not only by strain but also by crystal orientation. This is particularly interesting for multilayer stacks where the strain state is defined by the boundary conditions. We propose that other materials can be engineered in a similar manner by utilizing crystal anisotropy.