Example code for analog RGB LED strips. Depending on your setup, you can also use this with an individual common cathode or common anode RGB LED. You can also use this if you have an LED driver to control high power RGB LEDs.

• /Firmware - Arduino example code

• Non-Addressable RGB LED Strip Hookup Guide

• 12V LED Strips

  • COM-12021 - LED RGB Strip - Bare (1m)
  • COM-12022 - LED RGB Strip - Bare (5m)
  • COM-12023 - LED RGB Strip - Sealed (1m)
  • COM-12024 - LED RGB Strip - Sealed (5m)
  • KIT-12959 - N-Channel MOSFET Power Control Kit

• Single High Power LEDs

  • COM-15200 - Triple Output High Power RGB LED
  • COM-13705 - PicoBuck LED Driver

• Single RGB LEDs

  • Common Cathode
    • COM-09264 - LED - RGB 5mm, Diffused Common Cathode
    • COM-9852 - LED - RGB 5mm, Diffused Common Cathode (25 pack)
    • COM-00105 - LED - RGB 5mm, Clear Common Cathode
    • COM-09853 - LED - RGB 5mm, Clear Common Cathode (25 pack)
    • COM-11120 - Diffused LED - RGB 10mm, Common Cathode
    • DEV-13735 - LilyPad RGB LED, Common Cathode
    • DEV-13270 - Silk Flower LED 5mm, Common Cathode
  • Common Anode
    • COM-10820 - LED - RGB 5mm, Clear Common Anode
    • COM-10819 - LED - RGB 5mm, Clear Common Anode (25 pack)
    • COM-10821 - LED - RGB 5mm, Diffused Common Anode
    • COM-10818 - LED - RGB 5mm, Diffused Common Anode (25 pack)
  • Resistors
    • PRT-14490 - Resistor 330Ω 1/4 Watt PTH - 20 pack (Thick Leads), general current limiting resistor for 5V systems
    • PRT-14493 - Resistor 100Ω 1/4 Watt PTH - 20 pack (Thick Leads), general current limiting resistor for 3.3V systems

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.

Distributed as-is; no warranty is given.

• Your friends at SparkFun.