SparkFun Line Follower Array (SEN-13582)
The Sensor Bar takes an 8 bit reading of reflectance for use with following lines or reading dark/light patterns. The bar can see from about 1/4 to 3/4 inches away. IR illumination power can be adjusted with the on-board potentiometer. Illumination can be turned on and off with software to conserve power, or left on all the time for faster readings.
- /Documentation - Data sheets, additional product information
- /Hardware - Eagle design files (.brd, .sch)
- /Libraries - Libraries for use with the RedBot Line Follower Sensor Bar
- /Production - Production panel files (.brd)
- Library - Arduino library for the array.
- Hookup Guide - Basic hookup guide for the array.
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact [email protected].
Distributed as-is; no warranty is given.
- Your friends at SparkFun.