Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

kernel panic when strongswan accepts connection from client #11

Open
darren opened this issue Aug 4, 2018 · 1 comment
Open

kernel panic when strongswan accepts connection from client #11

darren opened this issue Aug 4, 2018 · 1 comment

Comments

@darren
Copy link

darren commented Aug 4, 2018

root@Khadas:~# uname -a
Linux Khadas 4.9.40 #9 SMP PREEMPT Sat Aug 4 07:31:46 PDT 2018 aarch64 GNU/Linux

img_0667 2

@numbqq
Copy link
Member

numbqq commented Aug 6, 2018

Hello Darren,

Thanks for your feedback.

I will look into this issue...

numbqq pushed a commit that referenced this issue Oct 10, 2018
…s found

[ Upstream commit 72f17ba ]

If an OVS_ATTR_NESTED attribute type is found while walking
through netlink attributes, we call nlattr_set() recursively
passing the length table for the following nested attributes, if
different from the current one.

However, once we're done with those sub-nested attributes, we
should continue walking through attributes using the current
table, instead of using the one related to the sub-nested
attributes.

For example, given this sequence:

1  OVS_KEY_ATTR_PRIORITY
2  OVS_KEY_ATTR_TUNNEL
3	OVS_TUNNEL_KEY_ATTR_ID
4	OVS_TUNNEL_KEY_ATTR_IPV4_SRC
5	OVS_TUNNEL_KEY_ATTR_IPV4_DST
6	OVS_TUNNEL_KEY_ATTR_TTL
7	OVS_TUNNEL_KEY_ATTR_TP_SRC
8	OVS_TUNNEL_KEY_ATTR_TP_DST
9  OVS_KEY_ATTR_IN_PORT
10 OVS_KEY_ATTR_SKB_MARK
11 OVS_KEY_ATTR_MPLS

we switch to the 'ovs_tunnel_key_lens' table on attribute #3,
and we don't switch back to 'ovs_key_lens' while setting
attributes #9 to #11 in the sequence. As OVS_KEY_ATTR_MPLS
evaluates to 21, and the array size of 'ovs_tunnel_key_lens' is
15, we also get this kind of KASan splat while accessing the
wrong table:

[ 7654.586496] ==================================================================
[ 7654.594573] BUG: KASAN: global-out-of-bounds in nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.603214] Read of size 4 at addr ffffffffc169ecf0 by task handler29/87430
[ 7654.610983]
[ 7654.612644] CPU: 21 PID: 87430 Comm: handler29 Kdump: loaded Not tainted 3.10.0-866.el7.test.x86_64 #1
[ 7654.623030] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
[ 7654.631379] Call Trace:
[ 7654.634108]  [<ffffffffb65a7c50>] dump_stack+0x19/0x1b
[ 7654.639843]  [<ffffffffb53ff373>] print_address_description+0x33/0x290
[ 7654.647129]  [<ffffffffc169b37b>] ? nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.654607]  [<ffffffffb53ff812>] kasan_report.part.3+0x242/0x330
[ 7654.661406]  [<ffffffffb53ff9b4>] __asan_report_load4_noabort+0x34/0x40
[ 7654.668789]  [<ffffffffc169b37b>] nlattr_set+0x164/0xde9 [openvswitch]
[ 7654.676076]  [<ffffffffc167ef68>] ovs_nla_get_match+0x10c8/0x1900 [openvswitch]
[ 7654.684234]  [<ffffffffb61e9cc8>] ? genl_rcv+0x28/0x40
[ 7654.689968]  [<ffffffffb61e7733>] ? netlink_unicast+0x3f3/0x590
[ 7654.696574]  [<ffffffffc167dea0>] ? ovs_nla_put_tunnel_info+0xb0/0xb0 [openvswitch]
[ 7654.705122]  [<ffffffffb4f41b50>] ? unwind_get_return_address+0xb0/0xb0
[ 7654.712503]  [<ffffffffb65d9355>] ? system_call_fastpath+0x1c/0x21
[ 7654.719401]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.726298]  [<ffffffffb4f41d79>] ? update_stack_state+0x229/0x370
[ 7654.733195]  [<ffffffffb53fe4b5>] ? kasan_unpoison_shadow+0x35/0x50
[ 7654.740187]  [<ffffffffb53fe62a>] ? kasan_kmalloc+0xaa/0xe0
[ 7654.746406]  [<ffffffffb53fec32>] ? kasan_slab_alloc+0x12/0x20
[ 7654.752914]  [<ffffffffb53fe711>] ? memset+0x31/0x40
[ 7654.758456]  [<ffffffffc165bf92>] ovs_flow_cmd_new+0x2b2/0xf00 [openvswitch]

[snip]

[ 7655.132484] The buggy address belongs to the variable:
[ 7655.138226]  ovs_tunnel_key_lens+0xf0/0xffffffffffffd400 [openvswitch]
[ 7655.145507]
[ 7655.147166] Memory state around the buggy address:
[ 7655.152514]  ffffffffc169eb80: 00 00 00 00 00 00 00 00 00 00 fa fa fa fa fa fa
[ 7655.160585]  ffffffffc169ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.168644] >ffffffffc169ec80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa fa
[ 7655.176701]                                                              ^
[ 7655.184372]  ffffffffc169ed00: fa fa fa fa 00 00 00 00 fa fa fa fa 00 00 00 05
[ 7655.192431]  ffffffffc169ed80: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00
[ 7655.200490] ==================================================================

Reported-by: Hangbin Liu <[email protected]>
Fixes: 982b527 ("openvswitch: Fix mask generation for nested attributes.")
Signed-off-by: Stefano Brivio <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this issue Oct 10, 2018
[ Upstream commit 2c0aa08 ]

Scenario:
1. Port down and do fail over
2. Ap do rds_bind syscall

PID: 47039  TASK: ffff89887e2fe640  CPU: 47  COMMAND: "kworker/u:6"
 #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9
 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3
 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518
 #3 [ffff898e35f15b60] no_context at ffffffff8104854c
 #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675
 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3
 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8
 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95
    [exception RIP: unknown or invalid address]
    RIP: 0000000000000000  RSP: ffff898e35f15dc8  RFLAGS: 00010282
    RAX: 00000000fffffffe  RBX: ffff889b77f6fc00  RCX:ffffffff81c99d88
    RDX: 0000000000000000  RSI: ffff896019ee08e8  RDI:ffff889b77f6fc00
    RBP: ffff898e35f15df0   R8: ffff896019ee08c8  R9:0000000000000000
    R10: 0000000000000400  R11: 0000000000000000  R12:ffff896019ee08c0
    R13: ffff889b77f6fe68  R14: ffffffff81c99d80  R15: ffffffffa022a1e0
    ORIG_RAX: ffffffffffffffff  CS: 0010 SS: 0018
 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm]
 #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6
 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0
 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6

PID: 45659  TASK: ffff880d313d2500  CPU: 31  COMMAND: "oracle_45659_ap"
 #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4
 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf
 #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7
 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb
 #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm]
 #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma]
 #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds]
 #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds]
 #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670

PID: 45659                          PID: 47039
rds_ib_laddr_check
  /* create id_priv with a null event_handler */
  rdma_create_id
  rdma_bind_addr
    cma_acquire_dev
      /* add id_priv to cma_dev->id_list */
      cma_attach_to_dev
                                    cma_ndev_work_handler
                                      /* event_hanlder is null */
                                      id_priv->id.event_handler

Signed-off-by: Guanglei Li <[email protected]>
Signed-off-by: Honglei Wang <[email protected]>
Reviewed-by: Junxiao Bi <[email protected]>
Reviewed-by: Yanjun Zhu <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Acked-by: Doug Ledford <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this issue Oct 10, 2018
[ Upstream commit 2bbea6e ]

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 #8 [ffff880078447da8] mount_bdev at ffffffff81202570
 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
#10 [ffff880078447e28] mount_fs at ffffffff81202d09
#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
#12 [ffff880078447ea8] do_mount at ffffffff81220fee
#13 [ffff880078447f28] sys_mount at ffffffff812218d6
#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 #5 [ffff8800784179e8] get_super at ffffffff81201cc7
 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 #7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
#16 [ffff880078417d00] do_last at ffffffff8120d53d
#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
#20 [ffff880078417f70] sys_open at ffffffff811fde4e
#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.

Signed-off-by: Maurizio Lombardi <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Jan 3, 2019
commit 6cc4a08 upstream.

info->nr_rings isn't adjusted in case of ENOMEM error from
negotiate_mq(). This leads to kernel panic in error path.

Typical call stack involving panic -
 khadas#8 page_fault at ffffffff8175936f
    [exception RIP: blkif_free_ring+33]
    RIP: ffffffffa0149491  RSP: ffff8804f7673c08  RFLAGS: 00010292
 ...
 khadas#9 blkif_free at ffffffffa0149aaa [xen_blkfront]
 khadas#10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront]
 khadas#11 blkback_changed at ffffffffa014ea8b [xen_blkfront]
 khadas#12 xenbus_otherend_changed at ffffffff81424670
 khadas#13 backend_changed at ffffffff81426dc3
 khadas#14 xenwatch_thread at ffffffff81422f29
 khadas#15 kthread at ffffffff810abe6a
 khadas#16 ret_from_fork at ffffffff81754078

Cc: [email protected]
Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs")
Signed-off-by: Manjunath Patil <[email protected]>
Acked-by: Roger Pau Monné <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Aug 30, 2019
[ Upstream commit 163d1c3 ]

Back in 2013 Hannes took care of most of such leaks in commit
bceaa90 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")

But the bug in l2tp_ip6_recvmsg() has not been fixed.

syzbot report :

BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ khadas#11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
 kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694
 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
 copy_to_user include/linux/uaccess.h:174 [inline]
 move_addr_to_user+0x311/0x570 net/socket.c:227
 ___sys_recvmsg+0xb65/0x1310 net/socket.c:2283
 do_recvmmsg+0x646/0x10c0 net/socket.c:2390
 __sys_recvmmsg net/socket.c:2469 [inline]
 __do_sys_recvmmsg net/socket.c:2492 [inline]
 __se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485
 __x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x445819
Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819
RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c
R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf

Local variable description: ----addr@___sys_recvmsg
Variable was created at:
 ___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
 do_recvmmsg+0x646/0x10c0 net/socket.c:2390

Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at ffff8880ae62fbb0
Data copied to user address 0000000020000000

Fixes: a32e0ee ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Aug 30, 2019
…ll_sock().

[ Upstream commit cb66ddd ]

When it is to cleanup net namespace, rds_tcp_exit_net() will call
rds_tcp_kill_sock(), if t_sock is NULL, it will not call
rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free
connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in
net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect()
and reference 'net' which has already been freed.

In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before
sock->ops->connect, but if connect() is failed, it will call
rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always
failed, rds_connect_worker() will try to reconnect all the time, so
rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the
connections.

Therefore, the condition !tc->t_sock is not needed if it is going to do
cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always
NULL, and there is on other path to cancel cp_conn_w and free
connection. So this patch is to fix this.

rds_tcp_kill_sock():
...
if (net != c_net || !tc->t_sock)
...
Acked-by: Santosh Shilimkar <[email protected]>

==================================================================
BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28
net/ipv4/af_inet.c:340
Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721

CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 khadas#11
Hardware name: linux,dummy-virt (DT)
Workqueue: krdsd rds_connect_worker
Call trace:
 dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53
 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x120/0x188 lib/dump_stack.c:113
 print_address_description+0x68/0x278 mm/kasan/report.c:253
 kasan_report_error mm/kasan/report.c:351 [inline]
 kasan_report+0x21c/0x348 mm/kasan/report.c:409
 __asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429
 inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340
 __sock_create+0x4f8/0x770 net/socket.c:1276
 sock_create_kern+0x50/0x68 net/socket.c:1322
 rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114
 rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175
 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
 kthread+0x2f0/0x378 kernel/kthread.c:255
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

Allocated by task 687:
 save_stack mm/kasan/kasan.c:448 [inline]
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490
 slab_post_alloc_hook mm/slab.h:444 [inline]
 slab_alloc_node mm/slub.c:2705 [inline]
 slab_alloc mm/slub.c:2713 [inline]
 kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718
 kmem_cache_zalloc include/linux/slab.h:697 [inline]
 net_alloc net/core/net_namespace.c:384 [inline]
 copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424
 create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206
 ksys_unshare+0x340/0x628 kernel/fork.c:2577
 __do_sys_unshare kernel/fork.c:2645 [inline]
 __se_sys_unshare kernel/fork.c:2643 [inline]
 __arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643
 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
 invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
 el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83
 el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129
 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960

Freed by task 264:
 save_stack mm/kasan/kasan.c:448 [inline]
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521
 kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528
 slab_free_hook mm/slub.c:1370 [inline]
 slab_free_freelist_hook mm/slub.c:1397 [inline]
 slab_free mm/slub.c:2952 [inline]
 kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968
 net_free net/core/net_namespace.c:400 [inline]
 net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407
 net_drop_ns net/core/net_namespace.c:406 [inline]
 cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569
 process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
 worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
 kthread+0x2f0/0x378 kernel/kthread.c:255
 ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117

The buggy address belongs to the object at ffff8003496a3f80
 which belongs to the cache net_namespace of size 7872
The buggy address is located 1796 bytes inside of
 7872-byte region [ffff8003496a3f80, ffff8003496a5e40)
The buggy address belongs to the page:
page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000
index:0x0 compound_mapcount: 0
flags: 0xffffe0000008100(slab|head)
raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000
raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 467fa15("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Aug 30, 2019
[ Upstream commit 42dfa45 ]

Using gcc's ASan, Changbin reports:

  =================================================================
  ==7494==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 48 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e5330a5e in zalloc util/util.h:23
      #2 0x5625e5330a9b in perf_counts__new util/counts.c:10
      #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      khadas#5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      khadas#6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      khadas#7 0x5625e51528e6 in run_test tests/builtin-test.c:358
      khadas#8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      khadas#9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      khadas#10 0x5625e515572f in cmd_test tests/builtin-test.c:722
      khadas#11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 72 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e532560d in zalloc util/util.h:23
      #2 0x5625e532566b in xyarray__new util/xyarray.c:10
      #3 0x5625e5330aba in perf_counts__new util/counts.c:15
      #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      khadas#5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      khadas#6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      khadas#7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      khadas#8 0x5625e51528e6 in run_test tests/builtin-test.c:358
      khadas#9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      khadas#10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      khadas#11 0x5625e515572f in cmd_test tests/builtin-test.c:722
      khadas#12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

His patch took care of evsel->prev_raw_counts, but the above backtraces
are about evsel->counts, so fix that instead.

Reported-by: Changbin Du <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Aug 30, 2019
…_event_on_all_cpus test

[ Upstream commit 93faa52 ]

  =================================================================
  ==7497==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
      #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
      #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
      #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
      khadas#5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
      khadas#6 0x5625e51528e6 in run_test tests/builtin-test.c:358
      khadas#7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      khadas#8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      khadas#9 0x5625e515572f in cmd_test tests/builtin-test.c:722
      khadas#10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Fixes: f30a79b ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Aug 30, 2019
[ Upstream commit d982b33 ]

  =================================================================
  ==20875==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 1160 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x55bd50005599 in zalloc util/util.h:23
      #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
      #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
      #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
      khadas#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
      khadas#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
      khadas#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
      khadas#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
      khadas#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 19 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)

Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Fixes: 6a6cd11 ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Aug 30, 2019
fix up the error log:
[    2.901537] ==================================================================
[    2.901625] BUG: KASAN: global-out-of-bounds in __of_match_node.part.0+0x30/0xa0
[    2.901655] Read of size 1 at addr ffffff900934ae08 by task swapper/0/1
[    2.901693]
[    2.901727] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.19.20 khadas#11
[    2.901766] Hardware name: Rockchip RK3399 Evaluation Board v3 (Android) (DT)
[    2.901817] Call trace:
[    2.901863]  dump_backtrace+0x0/0x250
[    2.901909]  show_stack+0x14/0x1c
[    2.901942]  dump_stack+0xf8/0x170
[    2.901998]  print_address_description+0x54/0x238
[    2.902049]  kasan_report+0x294/0x2bc
[    2.902099]  __asan_load1+0x24/0x50
[    2.902154]  __of_match_node.part.0+0x30/0xa0
[    2.902188]  of_match_node+0x38/0x5c
[    2.902240]  of_match_device+0x48/0x4c
[    2.902294]  platform_match+0x60/0xe8
[    2.902341]  __driver_attach+0x40/0x10c
[    2.902392]  bus_for_each_dev+0x10c/0x134
[    2.902424]  driver_attach+0x30/0x3c
[    2.902454]  bus_add_driver+0x238/0x28c
[    2.902503]  driver_register+0x140/0x188
[    2.902559]  __platform_driver_register+0x7c/0x88
[    2.902619]  rockchip_clock_pvtm_driver_init+0x18/0x20
[    2.902666]  do_one_initcall+0x14c/0x47c
[    2.902702]  kernel_init_freeable+0x5ec/0x60c
[    2.902752]  kernel_init+0x10/0x110
[    2.902801]  ret_from_fork+0x10/0x18
[    2.902841]
[    2.902863] The buggy address belongs to the variable:
[    2.902925]  rockchip_clock_pvtm_match+0xc8/0x2e0
[    2.902944]
[    2.902991] Memory state around the buggy address:
[    2.903028]  ffffff900934ad00: 00 00 00 07 fa fa fa fa 00 00 00 00 00 00 00 00
[    2.903073]  ffffff900934ad80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    2.903126] >ffffff900934ae00: 00 fa fa fa fa fa fa fa 00 02 fa fa fa fa fa fa
[    2.903167]                       ^
[    2.903197]  ffffff900934ae80: 00 05 fa fa fa fa fa fa 00 00 00 00 03 fa fa fa
[    2.903230]  ffffff900934af00: fa fa fa fa 00 00 03 fa fa fa fa fa 00 00 00 06
[    2.903266] ==================================================================

Change-Id: Ie2bc926da76dfbb14ca6e250d7fe57e842939f79
Signed-off-by: Elaine Zhang <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue Dec 12, 2019
commit cf3591e upstream.

Revert the commit bd293d0. The proper
fix has been made available with commit d0a255e ("loop: set
PF_MEMALLOC_NOIO for the worker thread").

Note that the fix offered by commit bd293d0 doesn't really prevent
the deadlock from occuring - if we look at the stacktrace reported by
Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex -
i.e. it has already successfully taken the mutex. Changing the mutex
from mutex_lock to mutex_trylock won't help with deadlocks that happen
afterwards.

PID: 474    TASK: ffff8813e11f4600  CPU: 10  COMMAND: "kswapd0"
   #0 [ffff8813dedfb938] __schedule at ffffffff8173f405
   #1 [ffff8813dedfb990] schedule at ffffffff8173fa27
   #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
   #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
   #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
   khadas#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
   khadas#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
   khadas#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
   khadas#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
   khadas#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
  khadas#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
  khadas#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
  khadas#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
  khadas#13 [ffff8813dedfbec0] kthread at ffffffff810a8428
  khadas#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242

Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Fixes: bd293d0 ("dm bufio: fix deadlock with loop device")
Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread")
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit to numbqq/linux that referenced this issue May 30, 2020
commit ca4463b upstream.

The VT_DISALLOCATE ioctl can free a virtual console while tty_release()
is still running, causing a use-after-free in con_shutdown().  This
occurs because VT_DISALLOCATE considers a virtual console's
'struct vc_data' to be unused as soon as the corresponding tty's
refcount hits 0.  But actually it may be still being closed.

Fix this by making vc_data be reference-counted via the embedded
'struct tty_port'.  A newly allocated virtual console has refcount 1.
Opening it for the first time increments the refcount to 2.  Closing it
for the last time decrements the refcount (in tty_operations::cleanup()
so that it happens late enough), as does VT_DISALLOCATE.

Reproducer:
	#include <fcntl.h>
	#include <linux/vt.h>
	#include <sys/ioctl.h>
	#include <unistd.h>

	int main()
	{
		if (fork()) {
			for (;;)
				close(open("/dev/tty5", O_RDWR));
		} else {
			int fd = open("/dev/tty10", O_RDWR);

			for (;;)
				ioctl(fd, VT_DISALLOCATE, 5);
		}
	}

KASAN report:
	BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
	Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129

	CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 khadas#11
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
	Call Trace:
	 [...]
	 con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
	 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514
	 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629
	 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789
	 [...]

	Allocated by task 129:
	 [...]
	 kzalloc include/linux/slab.h:669 [inline]
	 vc_allocate drivers/tty/vt/vt.c:1085 [inline]
	 vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066
	 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229
	 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline]
	 tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341
	 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
	 tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
	 [...]

	Freed by task 130:
	 [...]
	 kfree+0xbf/0x1e0 mm/slab.c:3757
	 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline]
	 vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818
	 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
	 [...]

Fixes: 4001d7b ("vt: push down the tty lock so we can see what is left to tackle")
Cc: <[email protected]> # v3.4+
Reported-by: [email protected]
Acked-by: Jiri Slaby <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this issue Aug 20, 2020
[ Upstream commit 18f855e ]

Stefano reported a crash with using SQPOLL with io_uring:

  BUG: kernel NULL pointer dereference, address: 00000000000003b0
  CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11
  RIP: 0010:task_numa_work+0x4f/0x2c0
  Call Trace:
   task_work_run+0x68/0xa0
   io_sq_thread+0x252/0x3d0
   kthread+0xf9/0x130
   ret_from_fork+0x35/0x40

which is task_numa_work() oopsing on current->mm being NULL.

The task work is queued by task_tick_numa(), which checks if current->mm is
NULL at the time of the call. But this state isn't necessarily persistent,
if the kthread is using use_mm() to temporarily adopt the mm of a task.

Change the task_tick_numa() check to exclude kernel threads in general,
as it doesn't make sense to attempt ot balance for kthreads anyway.

Reported-by: Stefano Garzarella <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this issue Nov 7, 2020
[ Upstream commit e24c644 ]

I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.

Free the token variable before calling read_token in order to plug the
leak.

Signed-off-by: Philippe Duplessis-Guindon <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Link: https://lore.kernel.org/linux-trace-devel/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this issue Nov 7, 2020
[ Upstream commit d26383d ]

The following leaks were detected by ASAN:

  Indirect leak of 360 byte(s) in 9 object(s) allocated from:
    #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e)
    #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333
    #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59
    #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73
    #4 0x560578e07045 in test__pmu tests/pmu.c:155
    #5 0x560578de109b in run_test tests/builtin-test.c:410
    #6 0x560578de109b in test_and_print tests/builtin-test.c:440
    #7 0x560578de401a in __cmd_test tests/builtin-test.c:661
    #8 0x560578de401a in cmd_test tests/builtin-test.c:807
    #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312
    #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364
    #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408
    #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538
    #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308

Fixes: cff7f95 ("perf tests: Move pmu tests into separate object")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
JacobZang pushed a commit to JacobZang/linux that referenced this issue Jun 25, 2024
In the XDP_TX path, ionic driver sends a packet to the TX path with rx
page and corresponding dma address.
After tx is done, ionic_tx_clean() frees that page.
But RX ring buffer isn't reset to NULL.
So, it uses a freed page, which causes kernel panic.

BUG: unable to handle page fault for address: ffff8881576c110c
PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060
Oops: Oops: 0000 [khadas#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ khadas#11
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8
RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283
RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002
RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e
RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8
R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100
FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x254/0x790
? __pfx_page_fault_oops+0x10/0x10
? __pfx_is_prefetch.constprop.0+0x10/0x10
? search_bpf_extables+0x165/0x260
? fixup_exception+0x4a/0x970
? exc_page_fault+0xcb/0xe0
? asm_exc_page_fault+0x22/0x30
? 0xffffffffc0051f64
? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
? do_raw_spin_unlock+0x54/0x220
ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x7e7/0xc30
? __pfx_net_rx_action+0x10/0x10

Fixes: 8eeed83 ("ionic: Add XDP_TX support")
Signed-off-by: Taehee Yoo <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Reviewed-by: Brett Creeley <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
JacobZang pushed a commit to JacobZang/linux that referenced this issue Jun 25, 2024
…PLES event"

This reverts commit 7d1405c.

This causes segfaults in some cases, as reported by Milian:

  ```
  sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e
  raw_syscalls:sys_enter ls
  ...
  [ perf record: Woken up 3 times to write data ]
  malloc(): invalid next size (unsorted)
  Aborted
  ```

  Backtrace with GDB + debuginfod:

  ```
  malloc(): invalid next size (unsorted)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6,
  no_tid=no_tid@entry=0) at pthread_kill.c:44
  Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c
  44            return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO
  (ret) : 0;
  (gdb) bt
  #0  __pthread_kill_implementation (threadid=<optimized out>,
  signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
  khadas#1  0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>,
  signo=6) at pthread_kill.c:78
  khadas#2  0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/
  raise.c:26
  khadas#3  0x00007ffff6e384c3 in __GI_abort () at abort.c:79
  khadas#4  0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea
  "%s\n") at ../sysdeps/posix/libc_fatal.c:132
  khadas#5  0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850
  "malloc(): invalid next size (unsorted)") at malloc.c:5772
  khadas#6  0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0
  <main_arena>, bytes=bytes@entry=368) at malloc.c:4081
  khadas#7  0x00007ffff6eb877e in __libc_calloc (n=<optimized out>,
  elem_size=<optimized out>) at malloc.c:3754
  khadas#8  0x000055555569bdb6 in perf_session.do_write_header ()
  khadas#9  0x00005555555a373a in __cmd_record.constprop.0 ()
  khadas#10 0x00005555555a6846 in cmd_record ()
  khadas#11 0x000055555564db7f in run_builtin ()
  khadas#12 0x000055555558ed77 in main ()
  ```

  Valgrind memcheck:
  ```
  ==45136== Invalid write of size 8
  ==45136==    at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf)
  ==45136==    by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
  ==45136== Syscall param write(buf) points to unaddressable byte(s)
  ==45136==    at 0x575953D: __libc_write (write.c:26)
  ==45136==    by 0x575953D: write (write.c:24)
  ==45136==    by 0x35761F: ion (in /usr/bin/perf)
  ==45136==    by 0x357778: writen (in /usr/bin/perf)
  ==45136==    by 0x1548F7: record__write (in /usr/bin/perf)
  ==45136==    by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==  Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
  ==45136==    at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
  ==45136==    by 0x3574AB: zalloc (in /usr/bin/perf)
  ==45136==    by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
  ==45136==    by 0x15A845: cmd_record (in /usr/bin/perf)
  ==45136==    by 0x201B7E: run_builtin (in /usr/bin/perf)
  ==45136==    by 0x142D76: main (in /usr/bin/perf)
  ==45136==
 -----

Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/
Reported-by: Milian Wolff <[email protected]>
Tested-by: Milian Wolff <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected] # 6.8+
Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
JacobZang pushed a commit to JacobZang/linux that referenced this issue Jun 25, 2024
We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():

  BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:2620!
  invalid opcode: 0000 [khadas#1] PREEMPT SMP PTI
  CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 khadas#6
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
  RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]

With the following stack trace:

  #0  btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
  khadas#1  btrfs_drop_extents (fs/btrfs/file.c:411:4)
  khadas#2  log_one_extent (fs/btrfs/tree-log.c:4732:9)
  khadas#3  btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
  khadas#4  btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
  khadas#5  btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
  khadas#6  btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
  khadas#7  btrfs_sync_file (fs/btrfs/file.c:1933:8)
  khadas#8  vfs_fsync_range (fs/sync.c:188:9)
  khadas#9  vfs_fsync (fs/sync.c:202:9)
  khadas#10 do_fsync (fs/sync.c:212:9)
  khadas#11 __do_sys_fdatasync (fs/sync.c:225:9)
  khadas#12 __se_sys_fdatasync (fs/sync.c:223:1)
  khadas#13 __x64_sys_fdatasync (fs/sync.c:223:1)
  khadas#14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
  khadas#15 do_syscall_64 (arch/x86/entry/common.c:83:7)
  khadas#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)

So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().

This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:

  >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
  leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
  leaf 33439744 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
          item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
                  generation 7 transid 9 size 8192 nbytes 8473563889606862198
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 204 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417704.983333333 (2024-05-22 15:41:44)
                  mtime 1716417704.983333333 (2024-05-22 15:41:44)
                  otime 17592186044416.000000000 (559444-03-08 01:40:16)
          item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
                  index 195 namelen 3 name: 193
          item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 4096 ram 12288
                  extent compression 0 (none)
          item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 4096 nr 8192
          item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096
  ...

So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.

Here is the state of the filesystem tree at the time of the crash:

  >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root
  >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0))
  >>> print_extent_buffer(nodes[0])
  leaf 30425088 level 0 items 184 generation 9 owner 5
  leaf 30425088 flags 0x100000000000000
  fs uuid e5bd3946-400c-4223-8923-190ef1f18677
  chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
  	...
          item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160
                  generation 7 transid 7 size 4096 nbytes 12288
                  block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
                  sequence 6 flags 0x10(PREALLOC)
                  atime 1716417703.220000000 (2024-05-22 15:41:43)
                  ctime 1716417703.220000000 (2024-05-22 15:41:43)
                  mtime 1716417703.220000000 (2024-05-22 15:41:43)
                  otime 1716417703.220000000 (2024-05-22 15:41:43)
          item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13
                  index 195 namelen 3 name: 193
          item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37
                  location key (0 UNKNOWN.0 0) type XATTR
                  transid 7 data_len 1 name_len 6
                  name: user.a
                  data a
          item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53
                  generation 9 type 1 (regular)
                  extent data disk byte 303144960 nr 12288
                  extent data offset 0 nr 8192 ram 12288
                  extent compression 0 (none)
          item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53
                  generation 9 type 2 (prealloc)
                  prealloc data disk byte 303144960 nr 12288
                  prealloc data offset 8192 nr 4096

Item 5 in the log tree corresponds to item 183 in the filesystem tree,
but nothing matches item 4. Furthermore, item 183 is the last item in
the leaf.

btrfs_log_prealloc_extents() is responsible for logging prealloc extents
beyond i_size. It first truncates any previously logged prealloc extents
that start beyond i_size. Then, it walks the filesystem tree and copies
the prealloc extent items to the log tree.

If it hits the end of a leaf, then it calls btrfs_next_leaf(), which
unlocks the tree and does another search. However, while the filesystem
tree is unlocked, an ordered extent completion may modify the tree. In
particular, it may insert an extent item that overlaps with an extent
item that was already copied to the log tree.

This may manifest in several ways depending on the exact scenario,
including an EEXIST error that is silently translated to a full sync,
overlapping items in the log tree, or this crash. This particular crash
is triggered by the following sequence of events:

- Initially, the file has i_size=4k, a regular extent from 0-4k, and a
  prealloc extent beyond i_size from 4k-12k. The prealloc extent item is
  the last item in its B-tree leaf.
- The file is fsync'd, which copies its inode item and both extent items
  to the log tree.
- An xattr is set on the file, which sets the
  BTRFS_INODE_COPY_EVERYTHING flag.
- The range 4k-8k in the file is written using direct I/O. i_size is
  extended to 8k, but the ordered extent is still in flight.
- The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this
  calls copy_inode_items_to_log(), which calls
  btrfs_log_prealloc_extents().
- btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the
  filesystem tree. Since it starts before i_size, it skips it. Since it
  is the last item in its B-tree leaf, it calls btrfs_next_leaf().
- btrfs_next_leaf() unlocks the path.
- The ordered extent completion runs, which converts the 4k-8k part of
  the prealloc extent to written and inserts the remaining prealloc part
  from 8k-12k.
- btrfs_next_leaf() does a search and finds the new prealloc extent
  8k-12k.
- btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into
  the log tree. Note that it overlaps with the 4k-12k prealloc extent
  that was copied to the log tree by the first fsync.
- fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k
  extent that was written.
- This tries to drop the range 4k-8k in the log tree, which requires
  adjusting the start of the 4k-12k prealloc extent in the log tree to
  8k.
- btrfs_set_item_key_safe() sees that there is already an extent
  starting at 8k in the log tree and calls BUG().

Fix this by detecting when we're about to insert an overlapping file
extent item in the log tree and truncating the part that would overlap.

CC: [email protected] # 6.1+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: David Sterba <[email protected]>
JacobZang pushed a commit to JacobZang/linux that referenced this issue Jul 19, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary
transaction credits using ocfs2_calc_extend_credits().  This however does
not take into account that the IO could be arbitrarily large and can
contain arbitrary number of extents.

Extent tree manipulations do often extend the current transaction but not
in all of the cases.  For example if we have only single block extents in
the tree, ocfs2_mark_extent_written() will end up calling
ocfs2_replace_extent_rec() all the time and we will never extend the
current transaction and eventually exhaust all the transaction credits if
the IO contains many single block extents.  Once that happens a
WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in
jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to
this error.  This was actually triggered by one of our customers on a
heavily fragmented OCFS2 filesystem.

To fix the issue make sure the transaction always has enough credits for
one extent insert before each call of ocfs2_mark_extent_written().

Heming Zhao said:

------
PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error"

PID: xxx  TASK: xxxx  CPU: 5  COMMAND: "SubmitThread-CA"
  #0 machine_kexec at ffffffff8c069932
  khadas#1 __crash_kexec at ffffffff8c1338fa
  khadas#2 panic at ffffffff8c1d69b9
  khadas#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2]
  khadas#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2]
  khadas#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2]
  khadas#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2]
  khadas#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2]
  khadas#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2]
  khadas#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2]
khadas#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2]
khadas#11 dio_complete at ffffffff8c2b9fa7
khadas#12 do_blockdev_direct_IO at ffffffff8c2bc09f
khadas#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2]
khadas#14 generic_file_direct_write at ffffffff8c1dcf14
khadas#15 __generic_file_write_iter at ffffffff8c1dd07b
khadas#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2]
khadas#17 aio_write at ffffffff8c2cc72e
khadas#18 kmem_cache_alloc at ffffffff8c248dde
khadas#19 do_io_submit at ffffffff8c2ccada
khadas#20 do_syscall_64 at ffffffff8c004984
khadas#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba

Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Reviewed-by: Heming Zhao <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
viraniac pushed a commit to viraniac/khadas_linux that referenced this issue Aug 21, 2024
commit a1fafa3 upstream.

If an FPAC exception is taken from EL1, the entry code will call
do_ptrauth_fault(), where due to:

	BUG_ON(!user_mode(regs))

... the kernel will report a problem within do_ptrauth_fault() rather
than reporting the original context the FPAC exception was taken from.
The pt_regs and ESR value reported will be from within
do_ptrauth_fault() and the code dump will be for the BRK in BUG_ON(),
which isn't sufficient to debug the cause of the original exception.

This patch makes the reporting better by having separate EL0 and EL1
FPAC exception handlers, with the latter calling die() directly to
report the original context the FPAC exception was taken from.

Note that we only need to prevent kprobes of the EL1 FPAC handler, since
the EL0 FPAC handler cannot be called recursively.

For consistency with do_el0_svc*(), I've named the split functions
do_el{0,1}_fpac() rather than do_el{0,1}_ptrauth_fault(). I've also
clarified the comment to not imply there are casues other than FPAC
exceptions.

Prior to this patch FPAC exceptions are reported as:

| kernel BUG at arch/arm64/kernel/traps.c:517!
| Internal error: Oops - BUG: 00000000f2000800 [khadas#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00130-g9c8a180a1cdf-dirty khadas#12
| Hardware name: FVP Base RevC (DT)
| pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : do_ptrauth_fault+0x3c/0x40
| lr : el1_fpac+0x34/0x54
| sp : ffff80000a3bbc80
| x29: ffff80000a3bbc80 x28: ffff0008001d8000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000020400009 x22: ffff800008f70fa4 x21: ffff80000a3bbe00
| x20: 0000000072000000 x19: ffff80000a3bbcb0 x18: fffffbfffda37000
| x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000081a90000
| x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000
| x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000080000000
| x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000783
| x5 : ffff80000a3bbcb0 x4 : ffff0008001d8000 x3 : 0000000072000000
| x2 : 0000000000000000 x1 : 0000000020400009 x0 : ffff80000a3bbcb0
| Call trace:
|  do_ptrauth_fault+0x3c/0x40
|  el1h_64_sync_handler+0xc4/0xd0
|  el1h_64_sync+0x64/0x68
|  test_pac+0x8/0x10
|  smp_init+0x7c/0x8c
|  kernel_init_freeable+0x128/0x28c
|  kernel_init+0x28/0x13c
|  ret_from_fork+0x10/0x20
| Code: 97fffe5e a8c17bfd d50323bf d65f03c0 (d4210000)

With this patch applied FPAC exceptions are reported as:

| Internal error: Oops - FPAC: 0000000072000000 [khadas#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc3-00132-g78846e1c4757-dirty khadas#11
| Hardware name: FVP Base RevC (DT)
| pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : test_pac+0x8/0x10
| lr : 0x0
| sp : ffff80000a3bbe00
| x29: ffff80000a3bbe00 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffff80000a2c8000 x22: 0000000000000000 x21: 0000000000000000
| x20: ffff8000099fa5b0 x19: ffff80000a007000 x18: fffffbfffda37000
| x17: 3120676e696d7573 x16: 7361202c6e6f6974 x15: 0000000081a90000
| x14: 0040000000000041 x13: 0040000000000001 x12: ffff000001a90000
| x11: fffffbfffda37480 x10: 0068000000000703 x9 : 0001000080000000
| x8 : 0000000000090000 x7 : 0068000000000f03 x6 : 0060000000000783
| x5 : ffff80000a2c6000 x4 : ffff0008001d8000 x3 : ffff800009f88378
| x2 : 0000000000000000 x1 : 0000000080210000 x0 : ffff000001a90000
| Call trace:
|  test_pac+0x8/0x10
|  smp_init+0x7c/0x8c
|  kernel_init_freeable+0x128/0x28c
|  kernel_init+0x28/0x13c
|  ret_from_fork+0x10/0x20
| Code: d50323bf d65f03c0 d503233f aa1f03fe (d50323bf)

Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Anshuman Khandual <[email protected]>
Cc: Alexandru Elisei <[email protected]>
Cc: Amit Daniel Kachhap <[email protected]>
Cc: James Morse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
viraniac pushed a commit to viraniac/khadas_linux that referenced this issue Aug 21, 2024
commit b684c09 upstream.

ppc_save_regs() skips one stack frame while saving the CPU register states.
Instead of saving current R1, it pulls the previous stack frame pointer.

When vmcores caused by direct panic call (such as `echo c >
/proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the
backtrace correctly. On further analysis, it was found that it was because
of mismatch between r1 and NIP.

GDB uses NIP to get current function symbol and uses corresponding debug
info of that function to unwind previous frames, but due to the
mismatching r1 and NIP, the unwinding does not work, and it fails to
unwind to the 2nd frame and hence does not show the backtrace.

GDB backtrace with vmcore of kernel without this patch:

---------
(gdb) bt
 #0  0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>,
    newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69
 khadas#1  __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974
 khadas#2  0x0000000000000063 in ?? ()
 khadas#3  0xc000000003579320 in ?? ()
---------

Further analysis revealed that the mismatch occurred because
"ppc_save_regs" was saving the previous stack's SP instead of the current
r1. This patch fixes this by storing current r1 in the saved pt_regs.

GDB backtrace with vmcore of patched kernel:

--------
(gdb) bt
 #0  0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8)
    at ./arch/powerpc/include/asm/kexec.h:69
 khadas#1  __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974
 khadas#2  0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n")
    at kernel/panic.c:358
 khadas#3  0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155
 khadas#4  0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false)
    at drivers/tty/sysrq.c:602
 khadas#5  0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>,
    count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163
 khadas#6  0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>,
    buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340
 khadas#7  proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>,
    ppos=<optimized out>) at fs/proc/inode.c:352
 khadas#8  0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00,
    buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>,
    count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582
 khadas#9  0xc0000000005b4264 in ksys_write (fd=<optimized out>,
    buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2)
    at fs/read_write.c:637
 khadas#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>)
    at arch/powerpc/kernel/syscall.c:171
 khadas#11 0xc00000000000c270 in system_call_vectored_common ()
    at arch/powerpc/kernel/interrupt_64.S:192
--------

Nick adds:
  So this now saves regs as though it was an interrupt taken in the
  caller, at the instruction after the call to ppc_save_regs, whereas
  previously the NIP was there, but R1 came from the caller's caller and
  that mismatch is what causes gdb's dwarf unwinder to go haywire.

Signed-off-by: Aditya Gupta <[email protected]>
Fixes: d16a58f ("powerpc: Improve ppc_save_regs()")
Reivewed-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
Cc: [email protected]
Signed-off-by: Aditya Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants