using ESP32 - master mode bluetooth connect to HC-06 - slave mode

[j0r9e74]

It is possible to use ESP32 - master mode bluetooth connect to HC-06 (with arduino nano) - slave mode?
The usecase is to send/receive some control strings
I tried the different modified BluetoothSerial sources from github and got only two types of results:
- always saying "Connected succesfully!", no matter what name or address I used; tried also to communicate in this state but without success
- "Failed to connect" forever
It is not a matter of HC-06 bt connection as slave because I can use a phone to connect at it and send/receive strings.

[mprowe]

Hi,
I am not competent to advise on how to solve your problem. But it does sound like the same issue I had some time back? Unfortunately, at my age, my memory is not too good!

However, with the help of the real experts I think I had to modify the BluetoothSerial Library. As I say, I cant remember where or why now. However, if it should be any help, I have attached my project which I did get working to my satisfaction (an OBD reader). I have also attach the BluetoothSerial library. I think it is formally known as v1.0.4.

But as I said, I can't remember how I updated it. I can only assume I must have done it by hand, as I can't see it in the Arduino Library Manager?
Good luck, and sorry I can't be more help...
Regards, ~Martin
BluetoothSerial.zip
odb2_ESP32_BT.zip

[j0r9e74]

Hello,
Already tried 1.0.4 BluetoothSerial from the git and the results is described above.
I will also what have you send and let you know what I've got.
Thank you very much!

[j0r9e74]

Hello,
The same behavior. I have got:
11:25:03.568 -> Failed to connect. Make sure remote device is available and in range, then restart app.

Maybe I do something wrong?
Should I pair the devices first? How? Any other step that must be done before running the code?
HC-06 works with default pin: 1234.
Tried also with other bt devices from the house.

The code is bellow with your version of BluetoothSerial:
#include "BluetoothSerial.h"
BluetoothSerial SerialBT;
uint8_t address1[6] = {0x98, 0xD3, 0x32, 0x20, 0x87, 0xA0}; // HC-06
uint8_t address2[6] = {0x00, 0x34, 0xDA, 0xDE, 0x9D, 0xE0}; // G5
uint8_t address3[6] = {0x64, 0x7B, 0xCE, 0x0D, 0xF2, 0x2F}; // Galaxy S10 5G
uint8_t address4[6] = {0x00, 0x58, 0x56, 0x4A, 0x87, 0xCD}; // 6143 -> boxa mini
String name = "HC-06";
char *pin = "1234"; //<- standard pin would be provided by default
bool connected;
void setup() {
Serial.begin(115200);
SerialBT.begin("ESP32test", true);
SerialBT.setPin(pin);
Serial.println("The device started in master mode, make sure remote BT device is on!");
// connect(address) is fast (upto 10 secs max), connect(name) is slow (upto 30 secs max) as it needs
// to resolve name to address first, but it allows to connect to different devices with the same name.
// Set CoreDebugLevel to Info to view devices bluetooth address and device names
//connected = SerialBT.connect(name);
connected = SerialBT.connect(address1);

if(connected) {
Serial.println("Connected Succesfully!");
} else {
while(!SerialBT.connected(10000)) {
Serial.println("Failed to connect. Make sure remote device is available and in range, then restart app.");
}
}

// disconnect() may take upto 10 secs max
if (SerialBT.disconnect()) {
Serial.println("Disconnected Succesfully!");
}
// this would reconnect to the name(will use address, if resolved) or address used with connect(name/address).
SerialBT.connect();
}

[j0r9e74]

@mprowe can you give me more details please?
Should I pair the devices first? How? Any other step that must be done before running the code?
I can pair/connect to HC-06 using any phone BT but for ESP32 I receive:
"Failed to connect. Make sure remote device is available and in range, then restart app"
all the time.

[mprowe]

@j0r9e74 "Should I pair the devices first?"

If you had taken the time to look at my code, you would see that the first thing I did was to remove any previous bonding.
As I have said previously, my one and only project with the ESP32 Bluetooth interface was a long time ago and I have forgotten anything that I may have learned - apart from the fact that it was harder work than I would be prepared to go through again!
Regards,

[brownby]

I was having a similar problem to you (not being able to connect to HC-05 modules, and always saying connection was successful even when it wasn't). Basically, there are two problems:

1. There is a bug in the BluetoothSerial library in 1.0.4 where the waitForConnect() function will always return true regardless of if a connection is actually successful or not.

2. The patch to the BluetoothSerial library that added the ability to use the ESP32 as a master device was developed on version 1.0.2, but included in version 1.0.4. Something changed elsewhere between 1.0.2 and 1.0.3 that broke the ability to connect as a master to HC-05 modules with the BluetoothSerial library (and possibly other devices, I only have HC-05s handy so that's all I've tested).

The fix (for me) was to go down to version 1.0.2, then manually change the BluetoothSerial.cpp file with this one (which fixes the successful connection bug above). I suspect this was @mprowe's fix as well, as he was a participant in the discussion on the pull request where I finally found the solution, and the BluetoothSerial.cpp he shared has the fix for the waitForConnect() bug.

[dexop]

I have similar problem.
I am trying to connect ESP32 with slave device who has alphanumeric pin (TECNO), instead of numbers (1234).
is it mission impossible or is there some hint?

edit:
reverting to 1.0.2 with new .cpp from 1.0.4 solved my problem.

[vanniaz]

@brownby

1. There is a bug in the BluetoothSerial library in 1.0.4 where the waitForConnect() function will always return true regardless of if a connection is actually successful or not.

I saw your comment after having found the same bug and opened a new issue for this: #4081
Had I seen it before I would not have opened the issue, hopefully it will serve as a reminder to fix this bug (by the way, the same bug is in the "disconnect" and "isReady" functions)

[zjay1995]

Hello @dexop and @brownby . I was trying to connect ESP32 to HC05 as you guys doing. Using the SerialMBT example, followed your steps, but I got this error:
'class BluetoothSerial' has no member named 'connect'
Have you encounter this? Thanks a lot!

[brownby]

Haven't encountered that, no. connect is definitely defined in the BluetoothSerial.cpp file I linked.

I guess check that you properly uninstalled 1.0.4 and downgraded to 1.0.2? I only say that because the SerialToSerialBTM example wasn't included until 1.0.4.

[tofurky]

@zjay1995 i found you also need to replace the .h file with https://raw.githubusercontent.com/espressif/arduino-esp32/f0e2e2a62fe98ec9657f3935c41c88a0fd0e7acd/libraries/BluetoothSerial/src/BluetoothSerial.h

regardless, i still can't get it to connect, even after downgrading to 1.0.2. 1.0.4 crashes with Stack smashing protect failure! as has been mentioned in #3219.

fwiw, i'm trying to connect to a UM25C usb multimeter, which apparently has a DX-BT18 module that is similar to the HC-06. using a "DEVKIT1" board.

[stale]

[STALE_SET] This issue has been automatically marked as stale because it has not had recent activity. It will be closed in 14 days if no further activity occurs. Thank you for your contributions.

[stale]

[STALE_DEL] This stale issue has been automatically closed. Thank you for your contributions.