Allow boards.local.txt to stay local

[hpssjellis]

Problem: When using boards.local.txt you need to move the file to the board software location beside the boards.txt file. This location is not accessible from many schools, making several advanced programs not able to be run.

When that code is finished compiling we need to then delete the boards.local.txt file for things to go back to working normally.

Example try running

https://github.com/edgeimpulse/firmware-arduino-portenta-h7

Feature Request:

Have the IDE search the local sketch folder for a boards.local.txt file before compiling.

[per1234]

Thanks for your suggestion @hpssjellis.

Although I think this would be appropriate for other use cases (most likely as another path to global #defines a la arduino/arduino-builder#15), for your specific use case I think that a custom boards platform would be far superior.

With the custom boards platform approach, the user can simply select the appropriate board from the Tools > Board menu in the Arduino IDE, as well as making more granular configurations via custom board option menus if needed. The Arduino boards platform system allows you to reference resources (core libraries, core variants, tool recipes) from other installed platforms

Information about that here:

https://arduino.github.io/arduino-cli/latest/platform-specification/#referencing-another-core-variant-or-tool

Examples of minimal boards platforms using referencing:

• https://github.com/arduino/ArduinoCore-Z80-MBC
• https://github.com/damellis/attiny
• https://github.com/carlosefr/atmega

(these happen to be for AVR, but the system can be used with any architecture)

If you have any questions about creating such a platform, just ask over on the Arduino forum and I'll provide assistance there.

[Hyratel]

can I put a boards.local.txt directly in the sketch folder,? and if not, Why? This needs a good reason for it to not be present or intuitive. it's right there in the name - 'local' so intuitively, I should be able to add a boards.local.txt with a custom, single-project board def directly in the single sketch without adding it to Sketchbook/hardware

[matthijskooijman]

The original reason I added boards.local.txt and platform.local.txt a long time ago, was to have a git checkout of a core, and be able to customize it with a local file without having to make changes to a git-tracked file. "local" in this context was intended to mean "not in git".

I would oppose allowing a boards.local.txt or platform.local.txt in the sketch folder, since modifying these files allows modifying the compiler commands that are run during build. If you would read these files from a sketch directory, this would create a security problem when you compile an untrusted sketch, which could then lead to arbitrary command execution.

See for example also arduino/Arduino#421 (comment) which is an older discussion of this potential security issue.

[Hyratel]

if we take the Arduino IDE's design at face value ie, the basic user should never have to step outside the arduino ecosystem environment/user-space folders, having to put *.local.txt directly into the library folders in /Appdata/ rather misses the bus.

my example case here is I'm using a chip (non-AVR, exacts are contextually irrelevant) with several manufacturer variant suffixes, and the libraries I'm working with define a Generic of the Lowest Denominator/Most Limited version of the chip, and I wish to work with a higher-spec version of the chip (ver: 16k Flash -> ver: 32k Flash). I have found where in the boards.txt this is defined but I don't know of any way to add a menu entry from within the Arduino Userspace Directories without completely remaking the entire /hardware/ stack in /Sketches/Hardware/

if such a method does exist, then it's not documented anywhere I can easily discover with clear keywords for searchability (and 'hunt through every page on the wiki' is a tall order)

[matthijskooijman]

if we take the Arduino IDE's design at face value ie, the basic user should never have to step outside the arduino ecosystem environment/user-space folders, having to put *.local.txt directly into the library folders in /Appdata/ rather misses the bus.

Agreed, but that mostly means that these basic users are not the intended audience of *.local.txt files (instead, like I said, the audience is power users that use Arduino cores from git...).

if such a method does exist, then it's not documented anywhere I can easily discover with clear keywords for searchability (and 'hunt through every page on the wiki' is a tall order)

I'm not sure I understand your case exactly, but I think that creating a boards-only core could be helpful for your usecase. This means a core that contains just a boards.txt (and a small info-only platform.txt), that contains no recipes and not cores/arduino directory but inherits these from some existing other core. This is also the option that @per1234 describes above, with some example links.

[umbynos]

Closing, because documented alternative exist.

[pdcook]

Closing, because documented alternative exist.

There's a documented alternative for specifying compiler flags from within the sketch's directory? I apologize for necro-ing this thread, but if that's the case would you be able to point me to said feature/documentation? I would greatly appreciate it!