Create Huawei
Create Huawei
Create Huawei
GPON10-D2-PLM#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
GPON10-D2-PLM(config)#pon
GPON10-D2-PLM(config-pon)#
GPON10-D2-PLM(config-pon)#onu-type HWTC-HG8245A gpon description 4ETH,2POTS,WIFI
max-tcont 40 max-gemport 255 max-switch-perslot 32 max-flow-perswitch 200 max-
iphost 5
interface gpon-onu_1/8/2:1
tcont 1 name Speedy profile UP-1M
tcont 2 name VOIP profile UP-1M
gemport 1 name Speedy unicast tcont 1 dir both queue 1
gemport 1 traffic-limit downstream DOWN-10M
gemport 2 name GEM-VOIP unicast tcont 2 dir both queue 1
gemport 2 traffic-limit downstream DOWN-1M
switchport mode hybrid vport 1
switchport vlan 3121 tag vport 1
switchport mode hybrid vport 2
switchport vlan 841 tag vport 2
port-location format dsl-forum vport 1
pppoe-plus enable vport 1
pon-onu-mng gpon-onu_1/8/2:1
voip protocol sip
flow 2 switch switch_0/1
flow mode 1 tag-filter vid-filter untag-filter discard
flow mode 2 tag-filter vid-filter untag-filter discard
flow 1 priority 0 vid 3121
flow 2 priority 0 vid 841
gemport 1 flow 1
gemport 2 flow 2
switchport-bind switch_0/1 iphost 1
switchport-bind switch_0/1 iphost 2
ip-host 2 dhcp-enable true ping-response true traceroute-response true
onu-vlan iphost 1 up-mode add up-prio 0 up-vid 3121 down-mode transparent
vlan-filter-mode iphost 1 tag-filter vid-filter untag-filter discard
vlan-filter-mode iphost 2 tag-filter vid-filter untag-filter discard
vlan-filter iphost 1 priority 0 vid 3121
vlan-filter iphost 2 priority 0 vid 841