REFERENCE DRAWINGS REFERENCE DRAWINGS NOTES:

TOG IS CONSIDERED AS PER TOPOGRAPHY DRAWING/LASER SCAN INPUT.

U70-G-0030 - FDN. FORM. & REINF. CA-004425-001 1. ALL DIMENSIONS ARE IN MILLIMETERS.
HOWEVER FOR ANY VARIATION IN GRADE, TOG SHALL BE MANAGED TO
00CF1 U70-G-0028 - FDN. FORM. & REINF. CA-004423-001 UNLESS NOTED OTHERWISE.
BE 200MM MINIMUM AT SITE. FOR ANY HUGE VARIATION IN GRADE TO
U70-G-0047 - FDN. FORM. & REINF. CA-004429-001 2. ALL ELEVATIONS ARE IN METER.
MAINTAIN 200MM, REVERT BACK TO ENGINEERING OFFICE.
U70-STR-306 - FDN. FORM. & REINF. CA-005351-001 U70-D-0042 - TANK AREA DYKE WALL F & R. CA-003686-001 UNLESS NOTED OTHERWISE.
U70-STR-323 - FDN. FORM. & REINF. CA-005347-001 U70-D-0032 & 0033 - TANK AREA DYKE WALL F & R. CA-005207-001 3. PLANT DATUM ELEVATION +100.000M EQUALS TO
U70-PR-186 - FDN. FORM. & REINF. CA-003688-001&002 2.265 METERS SAVD 1978, 1994 ADJUSTMENT
U70-STR-091 A/B - FDN. FORM. & REINF. CA-005232-001 MSL DATUM.
U70-STR-092 A/B - FDN. FORM. & REINF. CA-005234-001 4. CO-ORDINATES SHOWN IN THIS DRAWING ARE IN
METERS ACCORDING TO ABU ALI PLANT SYSTEM.
PR-033A PR-033A PR-033A PR-033A PR-033A PR-033A PR-033B PR-033C
PR-033B PR-033B PR-033B PR-033B PR-033B
13
5. FOR LEGEND AND ABBREVIATIONS SEE DWG.
1 2 3 4 5 6 7 8 9 10 11 12
NO. CA-002392-001.
6. FOR CONCRETE GENERAL NOTES
SEE DWG NO CA-002390-001-002.
N 47.500 DRAWING LIMIT

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
7. TOF - TOP OF FOOTING, F.S - FIXED SADDLE
BOF - BOTTOM OF FOOTING, S.S - SLIDING SADDLE
8. REFER UNIT PLOT PLAN, FOR GRID NUMBERING,

FOR CONT.SEE DRAWING NO CA-002675-097

SECTIONS AND COMPLETE LAYOUT OF STRUCTURES,
PIPE RACKS, EQUIPMENTS, BUILDINGS, ETC.,
PR-033A PR-033B PR-033C
A A A 9. 600MM OF SELECTED FILL MATERIAL AS PER
6.1.2 & 6.3 OF SAES-A-114.

EL.1 +100.600 EL.1 +100.600

EL.1 +100.600
EL.1 +100.600
EL.1 +100.600 LEGEND:
EL.2 +99.350 EL.2 +99.350 ELEVATION FOR SUMP
EL.1 +100.600 EL.2 +99.350 EL.2 +99.350 EL.2 +99.350
EL.3 +98.900 EL.3 +98.900 EL.3 +98.900
EL.2 +98.750 EL.3 +98.900 EL.3 +98.900 EL.1A TOG/TOC EL.1 TOG/TOC
EL.4 - EL.4 - EL.4 -
EL.3 +98.300 EL.4 - EL.4 - FGL
EL.4 -

EL.3A BOF

PR-033A PR-033B PR-033C

EL.3B BOF
B B B
EL.3C BOF

NOTE-9
STR-0091A
FOR CONT. SEE ON DRAWING NO CA-002675-095

EL.1 +100.600 PR-186 PR-186 PR-186 EL.1 +100.600 EL.1 +100.600 EL.1 +100.600 SOIL
STR-0091A
02 EL.1 +100.600
EL.2 +99.350 A A' B EL.2 +99.350 EL.2 +99.350 EL.2 +99.350 EL.4
01 EL.2 +99.350
EL.3 +98.900 EL.3 +98.900 STR-0091B EL.3 +98.900 EL.3 +98.900
EL.3 +98.900
EL.4 - EL.4 - EL.4 - EL.4 -
STR-0091B
02
EL.4 -
01 ELEVATION FOR
U70-D-0045 U70-D-0047A ELEVATION OF FOUNDATION BLOCK FOUNDATION
EL.1 +101.394 EL.1 +100.600 EL.1 TOG/TOC
EL.1 +100.600 STR-323
EL.2 +99.794 EL.2 - FGL
EL.2 +99.250 1
EL.3 +99.394 EL.3 +99.800 EL.1 +100.600 EL.3 +98.900
EL.4 - EL.4 - EL.2 +99.550 EL.2 TOF EL.1 TOG/TOC
EL.4 - FGL
EL.3 +99.200
PR-186
CL OF FDN EL.4 - U70-U-0007
1 EL.3 BOF EL.3 BOF
U70-D-0047B EL.1 +100.600
STR-0091A C
L OF FDN
EL.1 +100.600 EL.2 -

L OF FDN

NOTE-9

NOTE-9
A
EL.2 - EL.1 +100.600 EL.3 +99.800 SOIL EL.4 SOIL EL.4
EL.3 +99.800 EL.2 +99.550 EL.4 -
EL.1 +100.600
CL OF FDN EL.4 - EL.3 +99.200
EL.2 +99.000

C
00C 00C C
L OF FDN EL.4 -
EL.3 +98.600
EL.4 - STR-0091B
STR-323

A
U70-G-0057A A REFERENCE DRAWINGS
EL.1 +100.600 OVERALL PLOT PLAN CA-077175-001
EL.2 - CA-077199-001
FACILITY PLOT PLAN - CHEMICAL STORAGE
C EL.3 +99.700 STR-323
PR-186 L OF FDN / EL.4 - B LEGEND & ABBR. CA-002392-001
2 SUCTION GENERAL NOTES - CONCRETE GENERAL NOTES CA-002390-001,002
CL OF FDN
FOUNDATION PLAN - KEY PLAN CA-002674-002
U70-G-0057B STR-323
C
U70-D-0042-FDN. FORM. & REINF. CA-003021-001
C EL.1 +100.600
EL.1 +100.600 L OF FDN / EL.2 -
U70-PR-033A - FDN. FORM. & REINF. CA-003231-001,002
EL.2 +98.800 SUCTION EL.3 +99.700 CL OF FDN U70-PR-033B - FDN. FORM. & REINF. CA-003233-001,002
00CF1 EL.3 +98.400 CL OF FDN EL.4 - U70-PR-033C - FDN. FORM. & REINF. CA-003235-001
EL.4 -
STR-323 U70-D-0045 - FDN. FORM. & REINF. CA-002982-001
C
L OF DISCHARGE
00C D U70-D-0032 - FDN. FORM. & REINF. CA-003008-001
U70-U-0010 U70-D-0033 - FDN. FORM. & REINF. CA-003010-001
FOR CONT. SEE ON DRAWING NO CA-002675-094

PR-186 EL.1 +100.600 U70-D-0036 - FDN. FORM. & REINF. CA-003024-001

EL.1 +100.600
3 EL.2 - U70-D-0032 U70-D-0037 - FDN. FORM. & REINF. CA-003026-001
EL.2 +98.650
EL.3 +99.800 EL.1 +101.394
C
L OF FDN EL.3 +98.300 U70-D-0053 - FDN. FORM. & REINF. CA-002991-001
EL.4 - EL.2 -
C U70-G-0016 EL.4 - CA-003527-001
L OF FDN C
L OF FDN EL.3 +99.800 U70-G-0060 A/B - FDN. FORM. & REINF.
U70-D-0037 EL.1 +100.600 EL.1 +100.600 EL.4 - U70-D-0047 A/B , U70-D-0054 A/B - FDN. FORM. & REINF. CA-004958-001
U70-G-0030 CL OF SUCTION
EL.1 +101.394 EL.2 +99.250 EL.2 - U70-U-007 - FDN. FORM. & REINF. CA-004912-001
EL.2 - EL.3 +98.900 EL.1 +100.600 EL.3 +99.800
U70-U-0009, U70-U-0010 - FDN. FORM. & REINF. CA-005045-001
EL.3 +99.800 EL.4 - EL.2 - EL.4 - CL OF DISCHARGE U70-D-0033

CL OF FDN
EL.3 +99.800 EL.1 +101.394 U70-U-0014 - FDN. FORM. & REINF. CA-004976-001
EL.4 - 00C
L OF FDN

C
L OF FDN
CL OF DISCHARGE EL.4 - EL.2 - U70-G-0057A/B - FDN. FORM. & REINF. CA-003521-001

DRAWING LIMIT
C
L OF FDN EL.3 +99.800 U70-G-0016 - FDN. FORM. & REINF. CA-004421-001
EL.4 -
L OF FDN

PR-186 CL OF SUCTION
KEY PLAN
C

4
CL OF FDN
EL.1 +100.600 U70-D-0053 C
L OF FDN
C

EL.2 +99.250 EL.1 +101.394

U70-U-0009 EL.2 -
U70-D-0036 EL.3 +98.900
EL.1 +101.394 EL.4 - EL.1 +100.600 EL.1 +100.600 EL.1 +100.600 EL.3 +99.800
EL.2 - EL.2 +98.750 EL.2 +99.450 EL.2 - EL.4 -
EL.3 +99.800 C
L OF FDN
EL.3 +99.800 EL.3 +98.400 EL.3 +99.100
EL.4 - EL.4 - EL.4 - EL.4 -
C
L OF FDN
U70-G-0028
PR-186 EL.1 +100.600
5 EL.2 - U70-G-0060A
EL.1 +102.400 C
L OF DISCHARGE EL.3 +99.800 EL.1 +100.600
EL.2 +100.400 CL OF FDN EL.4 - EL.2 -
EL.3 +100.100 EL.3 +99.800 THIS DRAWING
EL.4 +99.850 C
L OF SUCTION EL.4 -
U70-G-0047 CL OF FDN
CL OF FDN
EL.1 +100.600 C
L OF DISCHARGE 0 1.0 2.0 3.0 4.0 5.0 10.0
EL.2 -
C
L OF FDN / SUCTION
EL.3 +99.800
EL.4 -
EL.1 +101.400 00CF1 METERS
EL.2 +100.400

CL OF FDN
U70-D-0054A

CL OF FDN
C
L OF SUCTION EL.1 +100.600 EL.3 +100.100 SCALE: 1 : 100M
EL.4 +99.850
L OF FDN

PR-186 C EL.2 -
U70-D-0042 L OF FDN
6 EL.3 +99.800
EL.1 +102.394 C
L OF FDN / SUCTION CL OF FDN EL.4 - REVISION VALIDATION
EL.2 +99.850 STR-306
STR-306
C

STR-0092A STR-0092B
EL.1 +100.600 THIS REVISION NO. 00C IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
EL.3 +99.400 1 2 U70-G-0060B A A REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
EL.2 +99.450
EL.4 - EL.1 +100.600 EL.1 +100.600
EL.3 +99.100 10-00640-0001-011
EL.4 - EL.2 +99.250 EL.2 -
EL.3 +98.900 EL.3 +99.800 DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
U70-D-0054B (DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)
EL.4 - EL.4 - EL.1 +100.600 ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
EL.1 +100.600 STR-0092A STR-0092B
EL.2 +99.500 VCO SGU KAG TAZ
EL.2 - 02 02
EL.3 +99.150 01/20/24 01/20/24 01/20/24 01/20/24
CL OF FDN EL.3 +99.800 STR-0092A STR-0092B
EL.4 - REV.NO. DATE REVISION DESCRIPTION
STR-306
PR-186
EL.4 - 01 01
00CF1 07/24/24 ISSUED FOR CONSTRUCTION(FDC)
A
7 JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
EL.1 +100.600
CL OF FDN 10-00640-0001 CONSTRUCTION UNTIL CERTIFIED AND DATED

EL.2 +99.450
EL.3 +99.100
E 526.500

STR-306 DRAWING TYPE

EL.4 - U70-U-0014 FOUNDATION PLN/LAYOUT/SECT/DET FDN

E 606.500
B
L OF FDN

EL.1 +100.600
PR-186 EL.2 - U70 - OFFSITES & UTILITIES
8 EL.3 +99.800 ABU ALI UTILITIES
EL.4 -
C

ABU ALI SAUDI ARABIA

PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.
N -10.000 DRAWING LIMIT
U70 Q CA-002675 096 00CF1
Saudi Aramco 2615 ENG. (05/05)
JOB. 032239-SA No. U70-CB-A-0112596
VECTOR CADD-01
 DIA. OF
LONGITUDINAL

SAUDIARAMCO.
50m m
N.
BAR + ‚" C C C

MI
45°
A G
ANGLE J 50mm
STEEL OF MIN.
B F

50m m

50m m
B

A
BAR

C
N.

N.
C

J
HOOK E

MI

MI

OF
A

CONSENT
ANGLE
B D A A A B B
OF
HOOK
TYPE - 1 TYPE - 2 TYPE - 3 TYPE - 4 TYPE - 5 TYPE - 6 TYPE - 7 TYPE - 8

TTEN
WRI
NO. X CUTTING NO. X CUTTING
TYPE SIZE
D I M E N S I O N S ANGLE TYPE SIZE
D I M E N S I O N S ANGLE

THE
NO. CUTTING LENGTH = NO. CUTTING LENGTH =
MARK OF
REQ'D.
OF
OVERALL
OF
LENGTH TOTAL LENGTH LOCATION MARK OF
REQ'D.
OF
OVERALL
OF
LENGTH TOTAL LENGTH LOCATION
BAR BAR
A B C D E F G H DIM. J
HOOK METERS BAR BAR
A B C D E F G H DIM. J
HOOK METERS

THOUT
1 2 232 12 125 1750 125 90 1950 452.40 U70-D-0042-TANK DYKE

WI
2 2 232 12 125 1750 125 90 1950 452.40 BASE SLAB

NG
3 2 80 12 125 7385 125 90 7575 606.00 TYPE-1 (4 Nos.)

DRAWI
4 2 80 12 125 7385 125 90 7575 606.00

S
THI
5 2 152 12 200 2150 125 90 2425 368.60 WALL

FROM
6 9 152 12 200 2150 125 90 2425 368.60

7 2 148 12 200 2150 125 90 2425 358.90

NED
8 9 148 12 200 2150 125 90 2425 358.90

OBTAI
9 9 44 12 385 7360 125 90 7825 344.30

10 2 44 12 525 7385 125 90 7975 350.90

BE
11 2 44 12 525 7385 125 90 7975 350.90

PART,SHALL
12 9 44 12 385 7360 125 90 7825 344.30

N
I
FULL,OR
N
I ON
REPRODUCTI
SAUDIARAMCO.NO
NOTES:
BAR SIZE ADDITIONAL BAR 1. TYPES 1, 2, 3 & 7 DIMENSIONS OUTSIDE TO OUTSIDE.
RADIUS
DIA LENGTH FOR HOOK 2. TYPES 4, 5, 6 & 8 DIMENSIONS INSIDE TO INSIDE.

6 18 100 3. ALL DIMENSIONS ARE IN "mm" UNLESS NOTED.

OF
4D OR
65mm MIN. 10 30 125

PROPERTY
12 36 150

3D FOR BARS NOT OVER DIA. 22 REFERENCE DRAWINGS

D
16 48 175
R=
4D FOR BARS OVER DIA. 22
20 60 200 U70-D-0042 TANK AREA DYKE WALL

SOLE
CA-003686-001
FORMWORK & REINF.
ADDITIONAL BAR LENGTH 22 66 250

FROM THIS POINT

THE
25 100 325

30 120 425

ARE
32 128 475

N
HEREI
FOR TYPE 3 ONLY

NED
REVISION VALIDATION

CONTAI
THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

A REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

10-00640-0001-063

DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER

ON
(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)

NFORMATI
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

VCO SGU KAG TAZ

07/26/23 07/26/23 07/26/23 07/26/23
B

REV.NO. DATE REVISION DESCRIPTION

00 07/26/23 ISSUED FOR CONSTRUCTION

I
JOB ORDER/EWO NO.

THE
THIS REVISION IS NOT TO BE USED FOR
10-00640-0001 CONSTRUCTION UNTIL CERTIFIED AND DATED

SAUDI ARABIAN OIL COMPANY

AND
G DRAWING TYPE

REBAR/REINFORCING BAR DETAIL STL

NG
DRAWI
U70-D-0042 TANK DYKE- BBS
TYPE - 9
ABU ALI UTILITIES

S
THI
ABU ALI SAUDI ARABIA
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

U70 Q CB-003687 001 00

JOB 032239 SA No. U70-CE-B-3312126 Saudi Aramco 2871 ENG. (05/05)

RESTRICTED VECTOR CADD-03

 SAUDIARAMCO.
NOTES:
CALLED
U.T.M. 1. ALL DIMENSIONS ARE IN MILLIMETERS.
NORTH UNLESS NOTED OTHERWISE.
TRUE
2. ALL ELEVATIONS AND COORDINATES ARE IN METER.
NORTH UNLESS NOTED OTHERWISE.

U70-D-0042 TANK 3. PLANT DATUM ELEVATION +100.000M EQUALS TO

2.265 METERS SAVD 1978, 1994 ADJUSTMENT MSL
SHELTER COLUMN
DATUM. HPP ELEVATION IS EQUAL TO 100.400. UNO
REFER RELEVANT

OF
PREVAILING
4. FOR STANDARD DRAWING FOR REBAR ARRANGEMENT
FDN. DWG.

300
WIND EL. 102.400 SEE DWG NO CA-002394-001.

CONSENT
(TYP)
TOW 5. FOR CONCRETE GENERAL NOTES
SEE DWG NO CA-002390-001-002.

17° 25' 56" 6. FOR LEGEND AND ABBREVIATIONS

1600
SEE DWG. NO CA-002392-001.

7. REINFORCEMENT SHOWN IN THIS DWG IS TYPICAL;

TTEN
OUTSIDE INSIDE NUMBER OF STEEL BARS SHOWN ON BAR BENDING
SCHEDULE ARE TO BE PLACED AT EQUAL SPACING.

HPP
JOINT SEALER CONFORM TO

WRI
09-SAMSS-075 8. LENGTH OF STEEL REBARS SHALL BE CHECKED
ISOLATION JOINT
(HYDROCARBON RESISTANT) AND IF NEEDED, FIT TO PROPER LENGTH

400
PAVING DETAILS (TYP) (TYP) BY SUBCONTRACTOR.

THE
7250
REFER DWG. NO. FOR COATING &

100.
9. ALL REINFORCEMENT BARS TO BE CHECKED AND
JOINT FILLERSTRIPS
CA-004495-027 PROTECTION ADJUSTED ON SITE.
REFER NOTE-13 ASTM D1751 OR D1752

THOUT
10. EXCAVATION, BACKFILL AND COMPACTION SHALL
(TYP) BE DONE IN COMPLIANCE WITH THE
CONCRETE PAVING
MANDATORY REQUIREMENT OF SAES-A-114.
EL. 100.400

WI
11. SUBCONTRACTOR SHALL VERIFY ALL DIMENSIONS,
EJ (TYP) (HPP)
ELEVATIONS, COORDINATES AND CONDITIONS ON SITE

300
DYKE WALL EL.100.100 PRIOR TO CONSTRUCTION.

NG
(BOC)

DRAWI
EL. +102.400 (TOW) U70-D-0042 12. THIS DRAWING IS BASED ON OVERALL PLANT LAYOUT

14500
(TYP UNO) PLASTICIZED SHEET DWG NO: CA-077175-001.
| OF TANK
50THK. LEAN CONCRETE 13. DYKE/RETAINING WALL SHALL BE COATED INTERNALLY
VAPOR BARRIER 0.25MM THK.

TANK
ASTM E1745, CLASS A, WITH APCS-3. ALL CONCRETE SURFACES IN DIRECT
50 300 1600

S
AS PER SAES-Q-001, SECTION 7.7 CONTACT WITH THE EARTH UPTO FGL SHALL BE

THI
1600 (TYP) (TYP) COATED WITH A MINIMUM OF TWO COATS OF COAL TAR

OF
WATER BAR SEE NOTE-15 OR BITUMEN COATING THAT CONFORMS TO APCS-10

A OF SAES-H-101V. ALL ABOVE GROUND CONCRETE

FROM
(TYP)
SUBGRADE COMPACTED AS PER 95% COMPACTED
EXTERNAL SIDE SHALL BE PAINTED WITH APCS-1B
SAES-A-114 SECTION 6.2 200 THK. SELECT FILL AS PER SAES-H-003.
- 1600
(TYP)

7250
14. WATERSTOPS SHALL BE SWELLABLE TYPE

NED
ACCORDING TO ACI 350.4 SECTION 5.4 AND

A TESTED ACCORDING TO ACI 350.4 SECTION 4.5.2

SECTION

OBTAI
15. SIKA WATER BAR TYPE-V15 MAKE OR EQUIVALENT.
SCALE 1:25
-
16. REINFORCEMENT TO BE CUT AT OPENING LOCATIONS
100.400 HPP
TYPE-1 (FORM WORK) SUITABLY AT SITE.

BE
(TYP)
17. FOR DETAILS OF PAVING AND JOINTS REFER
1600

DRAWING NO. CA-002384-001.

PART,SHALL
300
JOINT SEALER CONFORM TO
LEGEND:
09-SAMSS-075
300 7250 7250 300 (HYDROCARBON RESISTANT) BOC - BOTTOM OF CONCRETE
(TYP)

N
25 B/F - BOTH FACE

I
EJ - EXPANSION JOINT

FULL,OR
14500
F.S - FAR SIDE
HPP - HIGH POINT OF PAVING

300

TYP)
N.S - NEAR SIDE
DYKE WALL LAYOUT T&B - TOP & BOTTOM

(
TOC - TOP OF CONCRETE

LD
300

N
I
JOINT FILLER STRIPS TOW - TOP OF WALL
MIN.

ON
ASTM D1751 OR D1752 - CATCH BASIN
LD (TYP)

REPRODUCTI
(TYP)

REFERENCE DRAWINGS
EXPANSION JOINT OVERALL PLOT PLAN CA-077175-001

CORNER WALL DETAIL FACILITY PLOT PLAN CHEMICAL STORAGE CA-077199-001

VERTICAL WALL SPAN LEGEND & ABBR. CA-002392-001

GENERAL NOTES - CONCRETE GENERAL NOTES CA-002390-001,002

SAUDIARAMCO.NO
PAVING LAYOUT CA-004495-027

FOUNDATION PLAN CA-002675-096

U70-D-0040 METHANOL TANK FDN. F&R. CA-003021-001

U70-D-0040 METHANOL TANK DYKE WALL BBS CB-003687-001

38-T12-200- 6 -(F.S)

10-T12-200- 4 -T 38-T12-200- 5 -(N.S)

10-T12-200- 3 -B 11-T12-200- 11
KEY PLAN
CALLED

OF
U.T.M.
NORTH
TRUE
NORTH

PREVAILING

PROPERTY
WIND

17° 25' 56"

11-T12-200- 12

10-T12-200- 4 -T 29-T12-200- 2 -T

SOLE
10-T12-200- 3 -B 29-T12-200- 1 -B
S)

S)
N.

F.

THE
7
-(

-(
37-T12-200- 8

NF)
37-T12-200- 7

FF)
8

ARE
(
(
THIS DRAWING
A

10
9

N
A

HEREI
-
0 1.0 2.0 3.0 4.0 5.0 10.0

-
2 METERS

NED
SCALE: 1 : 100M
11-T12-200- 9

CONTAI
11-T12-200- 10 REVISION VALIDATION

4 (T) THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION

REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:

3 (B)
1

ON
10-00640-0001-061

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)

ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

VCO SGU KAG TAZ

07/26/23 07/26/23 07/26/23 07/26/23

REV.NO. DATE REVISION DESCRIPTION

I
00 07/26/23 ISSUED FOR CONSTRUCTION

THE
29-T12-200- 2 -T JOB ORDER/EWO NO.
THIS REVISION IS NOT TO BE USED FOR
10-00640-0001 CONSTRUCTION UNTIL CERTIFIED AND DATED
29-T12-200- 1 -B
SAUDI ARABIAN OIL COMPANY

AND
A SECTION
DRAWING TYPE

SCALE 1:25 CONC RETAIN'G WALL/SLEEPER PLN

-
FDN
TYPE-1 SLAB REINF. TYPE-1 DYKE WALL REINF.

NG
U70-D-0042 TANK AREA DYKE WALL F&R.

DRAWI
(TYP. REINFORCEMET DETAIL OF DYKE WALL)
(4 NOS.) (4 NOS.)
ABU ALI UTILITIES

ABU ALI SAUDI ARABIA

S
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
U70 Q CA-003686 001 00
JOB. 032239-SA No. U70-CE-A-3312124 Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-01