0% encontró este documento útil (0 votos)
Test Bench (Diesel Pumps)
Descargar como docx, pdf o txt
Descargar como docx, pdf o txt
Descargar como docx, pdf o txt
/ 7
TESTING BENCH
What is test bench?
• A test bench is a platform for experimentation of large
development projects. Testbeds provide a rigorous, transparent,
and repeatable form of testing.
Test bench (diesel pumps)
Utility
• The usefulness of the test bench is to help diagnose the status
or calibration of a rotary, in-line injection pump according to the
technical data specified by the manufacturer.
• The test bench is a simulation of a diesel engine, since in it we can do the
following:
• Connect the fuel inlet by varying or applying the appropriate pressure.
• The return of fuel.
• The voltage supply can be 12 -24 volts (rotary pumps).
• We can manipulate the number of revolutions per minute, thus carrying out
tests on the pumps during start-up, idle, half load, full load or fuel cut-off.
• We can visualize the amount of fuel that each element of a pump injects
into the test tubes on the bench, with the same volume injected by all the
elements of said pump.
ASSEMBLY OF A PUMP IN LINE ON
ONE BASE.
If the pump to be assembled has 6 or more pumping elements,
as seen in fig. 1.9, use the thymes
quick tion
cu
LINEAR INJECTION PUMPS
• They are subjected to the following tests:
• •Adjustment of supplies.
• •Speed adjustment.
• •Maximum flow adjustment.
• •Checking supply at idle.
• •Start flow adjustment.
