Scribd
Cargar
268 vistas5 páginas

Comandos Teldat

Este documento muestra los comandos utilizados para configurar y monitorear diferentes aspectos de una red de área local. Se configuran y verifican interfaces de red, subinterfaces lógicas, rutas estáticas y BGP, VLAN, y protocolos de redundancia como HSRP.

Cargado por

yhubal surco A.
Derechos de autor
© © All Rights Reserved
Nos tomamos en serio los derechos de los contenidos. Si sospechas que se trata de tu contenido, reclámalo aquí.
Formatos disponibles
Descarga como TXT, PDF, TXT o lee en línea desde Scribd
268 vistas5 páginas

Comandos Teldat

Este documento muestra los comandos utilizados para configurar y monitorear diferentes aspectos de una red de área local. Se configuran y verifican interfaces de red, subinterfaces lógicas, rutas estáticas y BGP, VLAN, y protocolos de redundancia como HSRP.

Cargado por

yhubal surco A.
Derechos de autor
© © All Rights Reserved
Nos tomamos en serio los derechos de los contenidos. Si sospechas que se trata de tu contenido, reclámalo aquí.
Formatos disponibles
Descarga como TXT, PDF, TXT o lee en línea desde Scribd
Está en la página 1/ 5

(SHOW INTERFACE DESCRIPTION)

p 5
list devices
CENTRIA _SERVICIOS_164397 Config$list devices

Interface Connector Type of interface


ethernet0/0 GE0/FE0/LAN1 GigabitEthernet interface
ethernet0/1 GE1/FE1/LAN2 GigabitEthernet interface
ethernet0/2 SWITCH GigabitEthernet Switch interface
x25-node --- Router->Node
atm3/0 SLOT3 Generic ATM
ethernet3/0 SLOT3 SOFTPTM Ethernet
cellular0/0 ANT AT SOFTUSB COM
cellular0/1 ANT AT SOFTUSB COM
loopback10 --- Loopback
ethernet0/0.10 --- Ethernet subinterface

*********************************************************************
(SHOW IP INTERFACE BRIEF)
p 3
CENTRIA _SERVICIOS_164397 +protocol ip
CENTRIA _SERVICIOS_164397 IP+interface-addresses
Interface IP Addresses:
-----------------------
ethernet0/1 10.147.138.150/30
loopback10 1.1.1.1/32
ethernet0/0.10 172.29.0.1/24

Special IP Addresses:
---------------------
internal-address 0.0.0.0
management-address 0.0.0.0
router-id 1.1.1.1
global-address 1.1.1.1

************************************************************************

(SHOW INTERFACE ETHERNET0/0)


p 3
CENTRIA _SERVICIOS_164397 +network ethernet0/0

-- Ethernet Console --

CENTRIA _SERVICIOS_164397 ethernet0/0 ETH+sta


CENTRIA _SERVICIOS_164397 ethernet0/0 ETH+status
Supported .......... 0x227f
10baseT_Half
10baseT_Full
100baseT_Half
100baseT_Full
1000baseT_Half
1000baseT_Full
Advertising ........ 0x227f
10baseT_Half
10baseT_Full
100baseT_Half
100baseT_Full
1000baseT_Half
1000baseT_Full
Transceiver ........ External
Autonegotiation .... True
Link ............... True
Speed .............. 1000 Mbps
Duplex ............. Full
*********************************************************

(SHOW IP ROUTE)
p 3
CENTRIA _SERVICIOS_164397 +protocol ip
CENTRIA _SERVICIOS_164397 IP+dump-routing-table
Type Dest net/Mask Cost Age Next hop(s)

bgp(0)[0] 0.0.0.0/0 [100/0 ] 0 10.147.138.149 (ethernet0/1)


sbnt(0)[0] 1.0.0.0/8 [240/1 ] 0 none
dir(0)[1] 1.1.1.1/32 [ 0/1 ] 0 loopback10
sbnt(0)[0] 10.0.0.0/8 [240/1 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.28.128.0/24 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.64.0.0/16 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.65.0.0/16 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.66.0.0/16 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.67.0.0/16 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.72.10.0/24 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.72.11.0/24 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.72.13.0/24 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.72.14.0/24 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.72.100.0/29 [100/0 ] 0 10.147.138.149 (ethernet0/1)
bgp(0)[0] 10.80.0.0/23 [100/0 ] 0 10.147.138.149 (ethernet0/1)

********************************************************************************
(SHOW IP BGP SUMMARY)
CENTRIA _SERVICIOS_164397 +protocol bgp
CENTRIA _SERVICIOS_164397 BGP+summary
Configuration running
Neighbor V AS MsgRcvd MsgSent NumEst State Time
10.147.138.149 4 6147 26146 19994 70 Established 4h39m3s
BGP summary, 1 group, 1 peer.

(SHOW IP BGP NEIGHBORS 10.147.138.149 ADVERSITES )


p 3
CENTRIA _SERVICIOS_164397 +protocol bgp
CENTRIA _SERVICIOS_164397 BGP+routes sent_to_peer 10.147.138.149
Flags: A active, M multipath, D deleted, N not install, I incomplete
Proto Route/Mask NextHop Pref Pref2 Metr Metr2 ASPath
A--N- Dir 172.29/24 172.29.0.1 0 0 1 0
Incomplete (Id 1) ( a00002)
A--N- Sta 172.29.1/24 172.29.0.50 60 0 1 0
Incomplete (Id 1) ( a02002)
A--N- Sta 172.29.2/24 172.29.0.50 60 0 1 0
Incomplete (Id 1) ( a02002)
A--N- Sta 172.29.3/24 172.29.0.50 60 0 1 0
Incomplete (Id 1) ( a02002)

(SHOW IP BGP NEIGHBORS 10.147.138.149 ROUTES)


CENTRIA _SERVICIOS_164397 +protocol bgp
CENTRIA _SERVICIOS_164397 BGP+routes received_from_peer 10.147.138.149
Flags: A active, M multipath, D deleted, N not install, I incomplete
Proto Route/Mask NextHop Pref Pref2 Metr Metr2 ASPath
A---- BGP 0.0.0.0/0 10.147.138.149 100 0 none none (64654)
6147 64854 IGP (Id 401)( a02010)
A---- BGP 10.28.128/24 10.147.138.149 100 0 none none (64654)
6147 6147 Incomplete (Id 402)( a02010)
A---- BGP 10.64/16 10.147.138.149 100 0 none none (64654)
6147 64854 Incomplete (Id 400)( a02010)

**********************************************************************************
(BORRAR INTERFAZ e SUBINTERFAZ LOGICA)
p 4
CENTRIA _SERVICIOS_164397 Config>no device ethernet0/0
CENTRIA _SERVICIOS_164397 Config>no device ethernet0/0.10

***********************************************************************************
(CREAR SUBINTERFAZ)
p 4
CENTRIA _SERVICIOS_164397 Config>add device eth-subinterface ethernet0/0 11

CENTRIA _SERVICIOS_164397 Config>network ethernet0/0.11


encapsulation dot1q 11
description "LAN | CENTRIA _SERVICIOS|CD=164397"
ip address 172.29.254.2 255.255.255.248
ip policy route-map DATOS
ip flow egress
ip flow ingress
no shutdown
***********************************************************************************
*
(CREAR RUTA ESTATICA)
P 4
CENTRIA _SERVICIOS_164397 Config>protocol IP
no route 172.29.1.0 255.255.255.0 172.29.0.50
no route 172.29.2.0 255.255.255.0 172.29.0.50
no route 172.29.3.0 255.255.255.0 172.29.0.50
route 172.29.0.0 255.255.255.0 172.29.254.1
route 172.29.1.0 255.255.255.128 172.29.254.1
route
***********************************************************************************
****
(ANUNCIAR LAS REDES BGP)-- direct ( las ip que estan configuradas en la misma
interfaz)
P 4
protocol bgp
address-family ipv4
no export as 6147 prot static 172.29.1.0 mask 255.255.255.0
export as 6147 prot static 172.29.1.0 mask 255.255.255.128
export as 6147 prot static 172.29.254.0 mask 255.255.255.248
exit
save
exit
CENTRIA _SERVICIOS_164397 BGP+routes sent_to_peer 10.147.138.149
Flags: A active, M multipath, D deleted, N not install, I incomplete
Proto Route/Mask NextHop Pref Pref2 Metr Metr2 ASPath
A--N- Dir 1.1.1.1/32 1.1.1.1 0 0 1 0
Incomplete (Id 1) ( a00002)
A--N- Dir 10.147.138.148/30 10.147.138.150 0 0 1 0
Incomplete (Id 1) ( a00002)
A--N- Sta 172.29/24 172.29.254.1 60 0 1 0
Incomplete (Id 1) ( a02002)
A--N- Sta 172.29.1/25 172.29.254.1 60 0 1 0
Incomplete (Id 1) ( a02002)
A--N- Dir 172.29.254/29 172.29.254.2 0 0 1 0
Incomplete (Id 1) ( a00002)

CENTRIA _SERVICIOS_164397 BGP+

******************************************************************************
(FORZAR EL ANUNCIO POR BGP)
P4 o P5
protocol bgp
address-family ipv4
export as 6147 prot static all
export as 6147 prot direct all
***********************************************************************************
***
(SHOW IP CACHE FLOW)
p 3
+feature netflow
NETFLOW Mon+list cache

***********************************************************************************
***
(PARA VER LA MAC DE LAS INTERFACES)
p 3
protocol arp
dump ethernet0/0.51

*****************************************************************
(PARA BORRAR LOS CONTADORES DE LAS INTERFACES)
p 3
network ethernet0/0.51
clear

****************************************************************
Grabar la configuracion
p5 save
p4 save

*********************************
RESETEAR

restart

**********************************
ASIGNAR VLAN A LOS PUERTOS
p 5
feature vlan

verificacion : $show config

vlan 10 ethernet0/0 port 1


vlan 10 ethernet0/0 port 2
vlan 10 ethernet0/0 port 3
vlan 10 ethernet0/0 port 4
vlan 10 ethernet0/0 port internal

********************************
CONFIGURAR TVRP

p 4

network ethernet0/0.10
ip tvrp 10 ip 172.32.254.25
ip tvrp 10 priority 90
ip tvrp 10 authentication-data "hsrp"
ip tvrp 10 destination-ip 10.129.241.93

( NOTA: si configuras con cisco agregar tambien authentication)


standby 10 authentication hsrp

También podría gustarte