-------------------------------MANUAL DE RECUPERACIÓN SWITCH HUAWEI S5735-L48T4S-A

-------------------------------------------

**REQUISITOS PREVIOS**
PARCHE S5735-L-V200R022SPH120.pat (Ubicar ambos archivos en el escritorio de
preferencia)
FIRMWARE: s5735-l_v200r022c00spc500.cc
CONECTAR CABLE RJ-45 EN EL PUERTO QUE SE ENCUENTRA DEBAJO DEL PUERTO DE CONSOLA DEL
EQUIPO
ASIGNAR LA SIGUIENTE IP AL EQUIPO DEL IDC: 192.168.1.6 255.255.255.0
DESACTIVAR FIREWALL Y ANTIVIRUS
INSTALAR Y CONFIGURAR "WFTPD32" Con el usuario huawei || password huawei, así cómo
la ruta dónde se encuentran los archivos previamente mencionados
https://manualzz.com/doc/4138903/user-manual-of-wftpd32
TEL. TAC.: 8007703456

###PRESIONAR CTRL B HASTA OBTENER EL SIGUIENTE MENÚ Y SELECCIONAMOS LA OPCIÓN 3

Press Ctrl+B or Ctrl+E to enter BootLoad menu :

Password: //Enter the BootLoad password.

BootLoad Menu

1. Boot with default mode

2. Enter startup submenu
**********3. Enter ethernet submenu ****************
4. Enter filesystem submenu
5. Enter password submenu
6. Clear password for console user
7. Reboot
(Press Ctrl+E to enter diag menu)

Enter your choice(1-7): 3

------------------------------------------------------------------

##SELECCIONAR OPCIÓN 3

ETHERNET SUBMENU

1. Update BootROM system

2. Download file to Flash through ethernet interface
**********3. Modify ethernet interface boot parameter******************
4. Return to main menu

Enter your choice(1-4): 3

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2023.05.12 14:21:28 =~=~=~=~=~=~=~=~=~=~=~=

##SELECCIONAR OPCIÓN 2

BOOTLINE SUBMENU
 1. Set TFTP protocol parameters
****************** 2. Set FTP protocol parameters*************************
3. Set SFTP protocol parameters
4. Return to ethernet menu

Enter your choice(1-4): 2

-----------------------------------------------------------------------------------

##DENTRO DEL SIGUIENTE APARTADO DEFINIREMOS LA IP DE NUESTRO SERVIDOR FTP

PREVIAMENTE CONFIGURADO EN LA LAPTOP DEL IDC, LA IP DEL SWITCH SE MUESTRA POR
DEFECTO

'.' = clear field; '-' = go to previous field; 'Ctrl+D' = quit

Load File name : s5735-l_v200r022c00spc500.cc

Switch IP address : 192.168.1.13
Server IP address : 192.168.1.6
FTP User Name : huawei
FTP User Password : huawei

##PRESIONAMOS ENTER Y REGRESAMOS AL SUBMENU CON LA OPCIÓN 4

Starting to write BOOTLINE into flash ... done

BOOTLINE SUBMENU

1. Set TFTP protocol parameters

2. Set FTP protocol parameters
3. Set SFTP protocol parameters
*****************4. Return to ethernet menu************************

Enter your choice(1-4): 4

-----------------------------------------------------------------------------------
-

##SELECCIONAMOS LA OPCIÓN 1 PARA CARGAR DEL FIRMWARE DESDE EL SERVIDOR FTP, EN CASO
DE NO TENER ÉXITO REVISAR LA CONEXIÓN ENTRE EL SW Y LA LAPTOP

ETHERNET SUBMENU

******* 1. Download file to Flash through ethernet interface***************

2. Modify ethernet interface boot parameter
3. Return to main menu

Enter your choice(1-3): 1

Use ftp to download file : s5735-l_v200r022c00spc500.cc , please wait for a moment.

....................

Download file successfully.

ENTER

-----------------------------------------------------------------------------

##REGRESAMOS AL MENÚ PRINCIPAL CON LA OPCIÓN 3

ETHERNET SUBMENU

1. Download file to Flash through ethernet interface

2. Modify ethernet interface boot parameter
********3. Return to main menu*****************

Enter your choice(1-3): 3

---------------------------------------------------------------------------

##SELECCIONAMOS LA OPCIÓN 2 PARA ESPECIFICAR EL FIRMWARE CON EL QUE INICIARÁ EL

EQUIPO

BootLoad Menu

1. Boot with default mode

********2. Enter startup submenu************
3. Enter ethernet submenu
4. Enter filesystem submenu
5. Enter password submenu
6. Clear password for console user
7. Reboot
(Press Ctrl+E to enter diag menu)

Enter your choice(1-7): 2

--------------------------------------------------------------------------
##SELECCIONAMOS LA OPCIÓN 2

Startup Configuration Submenu

1. Display startup configuration

************2. Modify startup configuration**********
3. Return to main menu

Enter your choice(1-3): 2

Note: startup file field can not be cleared

'.'=clear field; 'Ctrl+D'=quit; Enter=use current configuration

##SELECCIONAMOS LA OPCIÓN 1 Y PEGAMOS EL NOMBRE DEL FIRMWARE EN LA OPCIÓN "NEW" Y
PRESIONAMOS ENTER PARA OMITIR LA INSTALACIÓN DEL PATCH EN ESTE MOMENTO:

startup type(1: Flash)

current: 1

new :

Flash startup file (can not be cleared)

current: s5735-l-v200r019c00spc500.cc

new : s5735-l_v200r022c00spc500.cc

Info: Checking signature, please wait.

patch package

current:

new :

##VOLVEMOS AL MENÚ PRINCIPAL CON LA OPCIÓN 3

Startup Configuration Submenu

1. Display startup configuration

2. Modify startup configuration
3. Return to main menu

Enter your choice(1-3): 3

--------------------------------------------------------

##SELECCIONAMOS LA OPCIÓN 1 PARA REINICIAR EL DISPOSITIVO

BootLoad Menu

1. Boot with default mode

2. Enter startup submenu
3. Enter ethernet submenu
4. Enter filesystem submenu
5. Enter password submenu
6. Clear password for console user
7. Reboot
(Press Ctrl+E to enter diag menu)

Enter your choice(1-7): 1

Startup information : 1
Read boot file: flash:/s5735-l_v200r022c00spc500.cc

Info: Checking signature, please wait.

Updating U-Boot ........................................................... done

Updating OSpkg ............................................................ done

Updating BootLoad ......................................................... done

CPLD Current Ver:0x19111318, File Ver:0x20051919

Upgrade CPLD from package ................................................. failed

Test again failed

Test again failed

Update all files, rebooting...

-----------------------------------------------------------------------------------
-----------------------

##AL INICIAR EL EQUIPO POR PRIMERA VEZ SOLICITARÁ UN PASSWORD DE CONSOLA POR
DEFECTO DE AL MENOS 8 CARACTERES

Recover configuration begin ...

Recover configuration end
Press ENTER to get started.

User interface con0 is available

Please Press ENTER.

An initial password is required for the first login via the console.
Set a password and keep it safe. Otherwise you will not be able to login via the
console.

Please configure the login password (8-16)

Enter Password:
Confirm Password:
Warning: The authentication mode was changed to password authentication and the
user level was changed to 15 on con0 at the first user login.
Warning: There is a risk on the user-interface which you login through. Please
change the configuration of the user-interface as soon as possible.

Info: Smart-upgrade is currently disabled. Enable Smart-upgrade to get recommended

version information.

-----------------------------------------------------------------------------------
---------------------------------

##VALIDAMOS QUE EL EQUIPO TENGA CARGADO EL FIRMWARE PREVIAMENTE CONFIGURADO:

<HUAWEI>dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5735 V200R022C00SPC500)
Copyright (C) 2000-2022 HUAWEI TECH Co., Ltd.
HUAWEI S5735-L48T4S-A Routing Switch uptime is 0 week, 0 day, 0 hour, 4 minutes

ES5D2T52S020 0(Master) : uptime is 0 week, 0 day, 0 hour, 3 minutes

DDR Memory Size : 1024 M bytes
FLASH Total Memory Size : 512 M bytes
FLASH Available Memory Size : 306 M bytes
Pcb Version : VER.B
MAB Version : 0
BootROM(1st) Version : 0000.0121
BootROM(2nd) Version : 0000.0200
BootLoad Version : 0216.0000
CPLD Version : 0106
Software Version : VRP (R) Software, Version 5.170 (V200R022C00SPC500)
FLASH Version : 0000.0000
<HUAWEI>
<HUAWEI>
<HUAWEI>dis device
S5735-L48T4S-A's Device status:
Slot Sub Type Online Power Register Status Role
-----------------------------------------------------------------------------------
---
0 - S5735-L48T4S-A Present PowerOn Registered Normal Master

Directory of flash:/

Idx Attr Size(Byte) Date Time FileName

0 -rw- 0 Dec 21 2019 00:27:15 last_startup_software_info.txt
1 drw- - Dec 21 2019 00:27:22 dhcp
2 drw- - Dec 21 2019 00:26:51 user
3 -rw- 5,290 Dec 21 2019 00:27:25 default_ca.cer
4 -rw- 91,745,073 Jan 01 1970 00:30:54 s5735-l_v200r022c00spc500.cc
5 -rw- 224 Dec 21 2019 00:27:16
current_startup_software_info.txt
6 drw- - Dec 21 2019 00:31:56 sessionlog
7 drw- - Dec 21 2019 00:27:05 security
8 -rw- 5,291 Dec 21 2019 00:27:28 root.cer
9 -rw- 1,407 Dec 21 2019 00:27:28 default_local.cer
10 drw- - Dec 21 2019 00:27:14 logfile
11 drw- - Jan 01 1970 00:01:24 $_user
12 drw- - Dec 21 2019 00:26:51 pmdata
13 drw- - Jan 01 1970 00:01:17 $_install_mod
14 drw- - Dec 21 2019 00:30:10 kboxsave
15 -rw- 836 Dec 21 2019 00:27:20 rr.bak
16 -rw- 836 Dec 21 2019 00:27:20 rr.dat
 17 -rw- 28 Dec 21 2019 00:27:12 private-data.txt
18 drw- - Dec 21 2019 00:27:21 localuser
19 -rw- 3,281 Dec 21 2019 00:27:28 device.pem
20 drw- - Dec 21 2019 00:27:05 sys_apinfo
21 -rw- 216 Dec 21 2019 00:27:28 ca_config.ini

313,436 KB total (226,436 KB free)

-----------------------------------------------------------------------------------
------------------------------------

##CREAMOS UN NUEVO USUARIO CON PRIVILEGIOS PARA ACCEDER A LA GUI DEL EQUIPO PARA
CARGAR EL PARCHE:

<SW_71863366>system-view
Enter system view, return user view with Ctrl+Z.
[SW_71863366]aaa

[HUAWEI-aaa]local-user admin password irreversible-cipher Admin@huawei

Info: Add a new user.
[HUAWEI-aaa]local-user admin service-type all
[HUAWEI-aaa]local-user admin service-type http
[HUAWEI-aaa]local-user admin privilege level 15
Warning: This operation may affect online users, are you sure to change the user
privilege level ?[Y/N]y

-----------------------------------------------------------------------------------
--------------------------------------------

###INSTALAMOS EL PARCHE INGRESANDO CON EL USUARIO CONFIGURADO EN EL PASO ANTERIOR

EN LA SIGUIENTE IP DESDE EL NAVEGADOR:ip address 192.168.1.253:

USUARIO: admin
PASS: Admin@huawei

#SE ADJUNTAN IMAGENES DE LAS PANTALLAS A VISUALIZAR DENTRO DEL NAVEGADOR

#SELECCIONAR EL ARCHIVO EN LA OPCIÓN "UPLOAD"
#APLICAR EL PARCHE EN LA OPCIÓN "PATCH"

##VALIDAMOS QUE EL PARCHE SE ENCUENTRE APLICADO:

[HUAWEI]dis patch-information
Patch Package Name :flash:/s5735-l-v200r022sph120.pat
Patch Package Version:V200R022SPH120
The state of the patch state file is: Running
The current state is: Running

************************************************************************
* Information about hot patch errors is as follows: *
************************************************************************
 Slot CurrentVersion
------------------------------------------------------------

No hot patch error occurs on any board.

************************************************************************
* The hot patch information, as follows: *
************************************************************************

Slot Type State Count Time(YYYY-MM-DD HH:MM:SS)

------------------------------------------------------------------------
0 C Running 36 2019-12-21 01:01:50+00:00

************************************************************************
* The firmware patch information, as follows: *
************************************************************************

Slot Type State Count

------------------------------------------------------------
0 REMOTE_UNIT Running 1

-----------------------------------------------------------------------------------
-----------------------------------------------------

POSTERIOR A PEGAR LA CONFIGURACIÓN DEL SWITCH, AGREGAMOS LOS SIGUIENTES COMANDOS

PARA HABILITAR EL SERVICIO DE SSH Y TELNET DESDE SYSTEM-VIEW:

telnet server enable

telnet server-source all
ssh server-source all
display telnet server status

##HABILITAMOS EL SERVICIO DE SNMP, LOS USUARIOS PARA ACCESO REMOTO SE CONFIGURAN DE

FORMA MANUAL DEBIDO A QUE LOS DE LA CONFIG ESTÁN CIFRADOS:
snmp-agent community read cipher SWhuaweiuni
snmp-agent community write cipher cN0.c@3aNjErC1T0#sNmP
snmp-agent community write cipher telcouninet
snmp-agent sys-info version v2c