COM 860 Guia Rapida
COM 860 Guia Rapida
COM 860 Guia Rapida
de alto alcance
COM-860
Gracias por la compra de este producto Steren.
Este manual contiene todas las indicaciones necesarias para manejar su
nuevo Router/repetidor WiFi de alto alcance.
Por favor, revselo completamente para estar seguro de cmo utilizar
apropiadamente el producto.
Para apoyo, compras y todo lo nuevo que tiene Steren,
visite nuestro sitio web:
www.steren.com
La operacin de este equipo est sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operacin
no deseada.
2
IMPORTANTE
3
CONEXIN DE HARDWARE
1. Conecte el puerto WAN del ruteador al puerto LAN del mdem usando un
cable Ethernet.
MODEM
LINEA
LAN4
LAN3
LAN2
LAN1
Default
WAN PWR
WPS
4
CONFIGURACIN RPIDA
1. Configure la direccin IP de la red como Automtica siguiendo la secuencia
de imgenes que se muestra a continuacin:
Esquina inferior derecha
de la pantalla.
a Clic derecho
b
Abrir redes y recursos compartidos
Estado de Ethernet
c
* Puede aparecer Conexin de rea local.
d
5
e Doble clic
Descripcin
6
2. Abra su navegador y escriba la direccin 192.168.1.1 para entrar a la
configuracin.
7
5. Si necesita entrar a la configuracin avanzada, presione el botn Advanced.
ESPECIFICACIONES
Estndares: IEEE 802,11 a/b/g/n, IEEE 802,3 10Base-T IEEE 802,3u 100
Base-TX
8
Seguridad en modo inalmbrico: 64/128-bit WEP
WPA-PSK/WPA2-PSK(TKIP)
SSID habilitacin/deshabilitacin
Filtro de conexin por MAC Address
Interface: 1*10/100 M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED: PWR, WPS, SYS 2,4 GHz 5,8 GHz, WLAN, LAN1-LAN4.
Antena: 4* externas 5 dBi de ganancia
Alimentacin: 12 V- - - 1 A
Convertidor de voltaje
Salida: 12 V- - - 1 A
Consumo: 8 W/h
CONDICIONES
1.- Para hacer efectiva la garanta, presente esta pliza y el producto, en donde fue adquirido o en
Electrnica Steren S.A. de C.V.
2.- Electrnica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin
ningn cargo al consumidor. Los gastos de transportacin sern cubiertos por el proveedor.
3.- El tiempo de reparacin en ningn caso ser mayor a 30 das, contados a partir de la recepcin del
producto en cualquiera de los sitios donde pueda hacerse efectiva la garanta.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, as como hacer vlida esta
garanta es en cualquiera de las direcciones mencionadas posteriormente.
This manual includes all the feature operations and troubleshooting necessary
to install and operate your new Sterens Long range WiFi router/repeater.
www.steren.com
The operation of this equipment is subject to the following two
conditions: (1) it is possible that this equipment or device may not
cause harmful interference, and (2) this device or device must accept
any interference, including interference that may cause undesired
operation .
The instructions of this manual are for reference about the product. There may
be differences due to updates.
Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.
2
IMPORTANT
Do not use or store this equipment in places where there are dripping or
splashing of water. It may cause electric shock or malfunction.
Verify that the electricity in the place where you want to install the
Router unit is stable.
HIGHLIGHTS
The double band router can be used as access point and signal repeater,
and it works in two frequencies (2.4GHz and 5.8 GHz) at the same time.
It has two antennas for signal reception and other two for signal transmission,
per band. It includes RJ45 jacks in case you need to plug in cables, and
for the access point function supports authentication and security standard
protocols, also, it includes a WPS button.
It can share an internet connection and interconnect it with devices with less
speed or older standards.
3
CONNECTING HARDWARE
1. Connect the WAN port on the router to the LAN port of the modem using an
Ethernet cable.
3. Insert the power adapter to the router and an electrical outlet. Turn on the
router.
4. Turn off the modem for at least 15 seconds and then turn it on again.
MODEM
LINEA
LAN4
LAN3
LAN2
LAN1
Default
WAN PWR
WPS
4
QUICK SETUP
1. Configure the IP address of the network as Automatic, follow the next image
sequence:
Lower right screen
corner.
a Right click
c
* Could be Local area network.
d
5
e Double click
6
2. Open your browser and enter the address 192.168.1.1 to enter the
configuration.
3. At the top, select the type of connection to the Internet (DHCP, Static, or
PPPoE). If you need assistance, please contact your service provider.
4. At the bottom you can assign a name (SSID) and password for 2.4 and 5.8
GHz networks. The default names are: steren_2_4G and steren_5G, the default
password is: password.
7
5. If you need to go to advanced settings, press the Advanced button.
To return to the factory configuration, with the router on, press and
hold the Default button on the back for 10 seconds, then release it. The
router will reboot with the default settings.
SPECIFICATIONS
Standards: IEEE 802.11 a/b/g/n, IEEE 802.3 10Base-T IEEE 802.3u
100Base-TX
Maximum data transfer rate: 2.4 and 5.8 GHz 300+300 Mbps at the same
time
Operating frequency range: 2.4-2.4835 GHz and 5-5.825 GHz
Maximum transmission power: 20 dBm (max.)
Transfer rate 802.11n 40 MHz (up to 300 Mbps) and 20 MHz (144 Mbps);
802.11g (up to 54 Mbps); 802.11b (11 Mbps)
Wireless configuration mode: AP, WDS, AP+WDS, Repeater, Client,
Multiple AP.
8
Security in Wireless mode: 64/128-bit WEP
WPA-PSK/WPA2-PSK(TKIP)
SSID enable / disable
Connection filter by MAC Address
Interface: 1*10/100 M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED: PWR, WPS, SYS 2.4 GHz 5.8 GHz, WLAN, LAN1-LAN4.
Antenna: 4* external 5 dBi gain
Supports: DHCP (dynamic IP), PPPoE, IP estatic, WISP, UPnP, DMZ, FTP
private ports, PPTP, L2TP. IPSEC, DDNS, estatic routing, WOL, remote
management
Input: 12 V- - - 1 A
Power converter
Output: 12 V- - - 1 A
Consumption: 8 W/h
9
Product: Long range WiFi router/repeater
Part number: COM-860
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was
received.
4. Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
If the product has been damaged by an accident, acts of God, mishandling, leaky
batteries, failure to follow enclosed instructions, improper repair by unauthorized
personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer In case your product fails
Address or have questions, please
Product contact your nearest dealer.
Brand If you are in Mexico, please
Part number call to our Call Center.
Serial number 01 800 500 9000
Date of delivery
10