Jump to content

Springfield Model 1886

From Wikipedia, the free encyclopedia
Springfield Model 1886
TypeBreech-loading carbine
Place of originUnited States
Service history
Used byUnited States
Production history
Designed1886
ManufacturerSpringfield Armory
Produced1886
No. builtc. 1,000
Specifications
Length40 in (1,000 mm)
Barrel length24 in (610 mm)

Cartridge.45-55-405
ActionTrapdoor
Rate of fireUser dependent; usually 8 to 10 rounds per minute
Muzzle velocity1,100 feet per second (340 m/s)
Feed systemBreech-loading
SightsIron sights

The Springfield Model 1886 was one of several models of carbines which used the trapdoor breechblock design developed by Erskine S. Allin. It was Springfield Armory's second attempt to create a single longarm that would satisfy the needs of the infantry, cavalry, and artillery (the first attempt being the Springfield Model 1882 short rifle).[1]

History and design

[edit]

The model 1886 carbine featured the new sight created by Lieutenant Colonel Adelbert R. Buffington that had been incorporated into the Springfield Model 1884 rifle. The stock had a storage compartment for a three piece folding cleaning rod and a ruptured case extractor. The upper barrel band also had a curved swivel sling design that allowed it to fit close to the stock when the carbine was placed in a saddle boot. The model 1886 did not have the lower barrel band that had been present on the Model 1882. The carbine was fitted with a 24-inch (61 cm) barrel and a full walnut stock.[1]

Approximately 1,000 carbines were produced and were sent to the field for trials. Like the model 1882, the model 1886 performed adequately in field trials, but was not seen as an improvement over existing arms.[2]

See also

[edit]

References

[edit]
  1. ^ a b "Uniforms, arms, and equipment: the U.S. Army on the Western Frontier, 1880-1892" By Douglas C. McChristian
  2. ^ "Model 1886 (24" Carbine)". The U.S. Springfield Trapdoor Information Center. Retrieved 2021-08-21.