Dolby E
 | This article needs additional citations for verification. (July 2015) |
Dolby E is a lossy audio compression and decoding technology developed by Dolby Laboratories that allows 6 to 8 channels of audio to be compressed into an AES3 digital audio stream that can be stored as a standard stereo pair of digital audio tracks.
Up to six channels, such as a 5.1 mix, can be recorded as 16-bit Dolby E data. However, if more than six channels are required, such as 5.1 plus a stereo LtRt, the AES3 data must be formatted as 20-bit audio. This increases capacity to eight channels.
Dolby E should never reach home viewers, as it is intended for use during post-production when moving multichannel material between production facilities or broadcasters. It is decoded prior to transmission.
It is very important to ensure that a Dolby E stream is never played through monitors or headphones without decoding. Undecoded Dolby E data will be converted to analog as full scale (0 dBFS) digital noise that can easily damage loudspeakers or hearing. Unambiguous media labeling is essential to avoid this.
Products
[edit]Dolby E encoding and decoding is implemented using commercially available hardware or software.
Hardware
[edit]- Dolby DP571
- Dolby DP572
- Dolby DP568
- Dolby DP580
- Dolby DP591
- Dolby DP600
- Dolby DP600C
Software
[edit]- FFmpeg (only decoding)[1]
- Avisynth (only decoding)[2]
- Emotion Systems 'eNGINE'[3]
- Minnetonka Audio 'AudioTools Server'[4]
- Minnetonka Audio SurCode for Dolby E[4]
- Neyrinck SoundCode For Dolby E
References
[edit]- ^ DolbyE Decoding with FFMpeg 5.1
- ^ DolbyE decoding with Avisynth
- ^ Dolby Encode and Decode using The eNGINE
- ^ a b "Minnetonka Audio". www.telosalliance.com.
External links
[edit]