dprとは 意味・読み方・使い方

When the door opening SW 16 is turned on under a state that the DPR is being off (not under a specified point range stopped state), the DSR is being on, the DSR dropping contact 28 is opened, the DOR is being off, and the door is not opened.例文帳に追加

ＤＰＲがオフ（定点域停止状態でない）の状態でドア開ＳＷ１６をオンすると、ＤＳＲがオン、ＤＳＲ落下接点２８が開成、ＤＯＲがオフでドアは開かない。 - 特許庁

Also, the DSR lifting up contact 29 is closed, the DSR is self-retained, and then, a specified point range stopped state is presented, and even if the DPR is turned on, the door is not opened resulting from the opening of the DSR dropping contact 28.例文帳に追加

またＤＳＲ扛上接点２９が閉成してＤＳＲが自己保持され、その後に定点域停止状態となってＤＰＲがオンしてもＤＳＲ落下接点２８の開成によりドアは開かない。 - 特許庁

The step S5 calculates the correction amount Kpm on the basis of the Dpb and the actual pressure difference Dpr, and the S6 calculates the presumptive deposited amount PMsm through correction of the fundamental value PMbse with the obtained correction amount Kpm.例文帳に追加

推定圧力差Ｄｐｂと実際の圧力差Ｄｐｒとに基づいて補正量Ｋｐｍを算出し（Ｓ５）、この補正量Ｋｐｍにより基本値ＰＭｂｓｅを補正して推定堆積量ＰＭｓｍを算出する（Ｓ６）。 - 特許庁

Every time when the demand injection amount integrated value ΣQinj exceeds a predetermined value B, a difference DQ between the pump discharge amount integrated value ΣQp and the demand injection amount integrated value ΣQinj is calculated to calculate estimate fuel pressure DPR based on the difference DQ (steps 105 to 107).例文帳に追加

そして、要求噴射量積算値ΣＱinj が所定値Ｂを越える毎に、ポンプ吐出量積算値ΣＱp と要求噴射量積算値ΣＱinj との差ＤＱを算出し、この差ＤＱに基づいて推定燃圧ＤＰＲを算出する（ステップ１０５〜１０７）。 - 特許庁

When the vehicle is in a specified point range in a platform at 5 km/hour or lower, a relay DPR is turned on, and when the door opening SW 16 is turned on under this state, a relay DOR is turned on, a lifting up contact 21 is closed, and power is fed to a door closing loading circuit 7, and the door is opened.例文帳に追加

車両が時速５ｋｍ以下でホーム内の定点域であるときリレーＤＰＲがオンになり、この状態でドア開ＳＷ１６をオンすると、リレーＤＯＲがオンとなり扛上接点２１が閉成し戸閉負荷回路７に電源が供給されてドアが開く。 - 特許庁

In this process, a temperature controller 20 which controls the temperature of the heater 12 provides an operation amount Dtr with a power calculation unit 26, an inverter 22 which controls the rotation of the fan 14 provides a current value Dir with the power calculation unit 26, and a controlling unit 24 provides a power consumption factor Dpr with the power calculation unit 26.例文帳に追加

このとき、ヒータ１２の温度制御を行う温度コントローラ２０からは操作量Ｄtrが電力計算部２６に供給され、ファン１４の回転制御を行うインバータ２２からは電流値Ｄirが電力計算部２６に供給され、制御部２４からは消費電力係数Ｄprが電力計算部２６に供給される。 - 特許庁