Title |
Power Deposition in Superconducting Dispersion Suppressor Magnets Downstream of the Betatron Cleaning Insertion for HL-LHC |
Authors |
- A. Waets, C. Bahamonde Castro, E. Belli, R. Bruce, N. Fuster-Martínez, A. Lechner, A. Mereghetti, S. Redaelli, M. Sabaté-Gilarte, E. Skordis
CERN, Meyrin, Switzerland
|
Abstract |
The power deposited in dispersion suppressor magnets downstream of the Large Hadron Collider (LHC) betatron cleaning insertion is governed by off-momentum particles scattered out of the primary collimators. In order to mitigate the risk of magnet quenches during periods of short beam lifetime in future High-Luminosity (HL-LHC) operation, new dispersion suppressor (DS) collimators are considered for installation (one per beam). In this paper, we present FLUKA simulations for both protons and Pb ions at 7 TeV, predicting the power deposition in the DS magnets, including the new higher-field dipoles 11T which are needed to integrate the collimator in the cold region next to the cleaning insertion. The simulated power deposition levels for the adopted HL-LHC collimator configuration and settings are used to assess the quench margin by comparison with the present estimated quench levels.
|
Funding |
Research supported by the HL-LHC project |
Paper |
download MOPAB001.PDF [0.183 MB / 4 pages] |
Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
Conference |
IPAC2021 |
Series |
International Particle Accelerator Conference (12th) |
Location |
Campinas, SP, Brazil |
Date |
24-28 May 2021 |
Publisher |
JACoW Publishing, Geneva, Switzerland |
Editorial Board |
Liu Lin (LNLS, Campinas, Brazil); John M. Byrd (ANL, Lemont, IL, USA); Regis Neuenschwander (LNLS, Campinas, Brazil); Renan Picoreti (LNLS, Campinas, Brazil); Volker R. W. Schaa (GSI, Darmstadt, Germany) |
Online ISBN |
978-3-95450-214-1 |
Online ISSN |
2673-5490 |
Received |
19 May 2021 |
Accepted |
07 July 2021 |
Issue Date |
16 August 2021 |
DOI |
doi:10.18429/JACoW-IPAC2021-MOPAB001 |
Pages |
37-40 |
Copyright |
Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|