Use Arduino for Projects > Projects > Game – Entertainment Projects > Singing Arduino

Singing Arduino

Thursday May 9, 2019 / Ibrar Ayyub
Categories: Game – Entertainment Projects, Projects
Tags: led, singing, surprise
Contents hide
1 Summary of Singing Arduino
2 Things used in this project
3 Story
4 Code

Summary of Singing Arduino


This project uses an Arduino MKR1000 to play songs like "Happy Birthday," "Star Wars," and others through a buzzer controlled via a webpage interface. Users can select songs or set timers for automatic play. As notes sound, alternating red and green LEDs light up. The Arduino is programmed with musical note frequencies and durations, enabling it to play various melodies by interpreting commands such as beep(note, duration).

Parts used in the Singing Arduino Project:

  • Arduino MKR1000
  • Buzzer
  • 5 mm Red LED
  • 5 mm Green LED
  • 330 ohm Resistor

Would you like to surprise someone with a song?

Things used in this project

Hardware components

Arduino MKR1000
Arduino MKR1000
×1
Buzzer
Buzzer
×1
5 mm LED: Red
5 mm LED: Red
×1
5 mm LED: Green
5 mm LED: Green
×1
Resistor 330 ohm
Resistor 330 ohm
×1

Story

Code

MKR1000 Singing Arduino

C/C++

#include <WiFi101.h>
#include <WiFiClient.h>
#include <WiFiServer.h>
#include <WiFiSSLClient.h>
#include <SPI.h>


char ssid[] = "your network SSID";      //  your network SSID (name)
char pass[] = "your network password";   // your network password
int keyIndex = 0;                 // your network key Index number (needed only for WEP)
int ledpin = 6;
int value = 0;
bool val = true;

/***************************/
/* In English Nomenclature */
/*    Used in Star Wars    */
#define c 261
#define d 294
#define e 329
#define f 349
#define g 391
#define gS 415
#define a 440
#define aS 455
#define b 466
#define cH 523
#define cSH 554
#define dH 587
#define dSH 622
#define eH 659
#define fH 698
#define fSH 740
#define gH 784
#define gSH 830
#define aH 880

/***************************/
/* In Spanish Nomenclature */
const int la = 110; //La
const int d = 131;//Do
const int r = 147;//Re
const int m = 165;//Mi
const int f = 174;//Fa
const int s = 196;//Sol
const int l = 220;//La
const int lS = 233;//La#
const int si = 247;//si
const int Do = 262;//do
const int Re = 294; //re
const int Mi = 329;//Mi
const int Fa = 349;//Fa
const int Sol = 392;//Sol
const int La = 440;//La
const int LaS = 466;//La#
const int Si = 494;//si
const int Doo = 523;//do
/***************************/


const int buzzerPin = 8;
const int ledPin1 = 12;
const int ledPin2 = 13;
int counter;

int status = WL_IDLE_STATUS;
WiFiServer server(80);

void setup() {
  Serial.begin(115200);      // initialize serial communication
  Serial.print("Start Serial ");
  pinMode(ledpin, OUTPUT);      // set the LED pin mode
  // Check for the presence of the shield
  Serial.print("WiFi101 shield: ");
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("NOT PRESENT");
    return; // don't continue
  }
  Serial.println("DETECTED");
  // attempt to connect to Wifi network:
  while ( status != WL_CONNECTED) {
    digitalWrite(ledpin, LOW);
    Serial.print("Attempting to connect to Network named: ");
    Serial.println(ssid);                   // print the network name (SSID);
    digitalWrite(ledpin, HIGH);
    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
    status = WiFi.begin(ssid, pass);
    // wait 10 seconds for connection:
    delay(10000);
  }
  server.begin();                           // start the web server on port 80
  printWifiStatus();                        // you're connected now, so print out the status
  pinMode(buzzerPin, OUTPUT);
}
void loop() {
  WiFiClient client = server.available();   // listen for incoming clients

  if (client) {                             // if you get a client,
    Serial.println("new client");           // print a message out the serial port
    String currentLine = "";                // make a String to hold incoming data from the client
    while (client.connected()) {            // loop while the client's connected
      if (client.available()) {             // if there's bytes to read from the client,
        char c = client.read();             // read a byte, then
        Serial.write(c);                    // print it out the serial monitor
        if (c == '\n') {                    // if the byte is a newline character

          // if the current line is blank, you got two newline characters in a row.
          // that's the end of the client HTTP request, so send a response:
          if (currentLine.length() == 0) {
            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
            // and a content-type so the client knows what's coming, then a blank line:
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println();

            // the content of the HTTP response follows the header:
            client.print("Click <a href=\"/S\">here</a> listen to Star Wars<br>");
            client.print("Click <a href=\"/R\">here</a> listen to 'The Rains of Castamere'<br>");
            client.print("Click <a href=\"/C\">here</a> listen to 'Cucaracha'<br>");
            client.print("Click <a href=\"/H\">here</a> listen to 'Happy Birthday'<br>");
            


            // The HTTP response ends with another blank line:
            client.println();
            // break out of the while loop:
            break;
          }
          else {      // if you got a newline, then clear currentLine:
            currentLine = "";
          }
        }
        else if (c != '\r') {    // if you got anything else but a carriage return character,
          currentLine += c;      // add it to the end of the currentLine
        }

        // Check to see if the client request was "GET /H" or "GET /L":
        if (currentLine.endsWith("GET /H")) {
          HappyBirthday();
        }
         if (currentLine.endsWith("GET /S")) {
          StarWars();
        }
        if (currentLine.endsWith("GET /R")) {
          The Rains of Castamere();               
        }
        if (currentLine.endsWith("GET /C")) {
          Cucaracha();               
        }
        
      }
    }
    // close the connection:
    client.stop();
    Serial.println("client disonnected");

  }
}

void printWifiStatus() {
  // print the SSID of the network you're attached to:
  Serial.print("SSID: ");
  Serial.println(WiFi.SSID());

  // print your WiFi shield's IP address:
  IPAddress ip = WiFi.localIP();
  Serial.print("IP Address: ");
  Serial.println(ip);

  // print the received signal strength:
  long rssi = WiFi.RSSI();
  Serial.print("signal strength (RSSI):");
  Serial.print(rssi);
  Serial.println(" dBm");
  // print where to go in a browser:
  Serial.print("To see this page in action, open a browser to http://");
  Serial.println(ip);
}

void beep(int note, int duration)
{
  //Play tone on buzzerPin
  tone(buzzerPin, note, duration);
  if (counter % 2 == 0)
  {
    digitalWrite(ledPin1, HIGH);
    delay(duration);
    digitalWrite(ledPin1, LOW);
  } else
  {
    digitalWrite(ledPin2, HIGH);
    delay(duration);
    digitalWrite(ledPin2, LOW);
  }
  noTone(buzzerPin);

  delay(50);
  counter++;
}

void HappyBirthday() {

  beep(Do, 250);
  beep(Do, 250);
  beep(Re, 500);
  beep(Do, 500);
  beep(Fa, 500);
  beep(Mi, 1000);
  beep(Do, 250);
  beep(Do, 250);
  beep(Re, 500);
  beep(Do, 500);
  beep(Sol, 500);
  beep(Fa, 1000);
  beep(Do, 250);
  beep(Do, 250);
  beep(Doo, 500);
  beep(La, 500);
  beep(Fa, 500);
  beep(Mi, 500);
  beep(Re, 1000);
  beep(LaS, 250);
  beep(LaS, 250);
  beep(La, 500);
  beep(Fa, 500);
  beep(Sol, 500);
  beep(Fa, 1000);

}

void Cucaracha() {
  beep(d, 250);
  beep(d, 250);
  beep(d, 250);
  beep(f, 250);
  delay(250);
  beep(l, 250);
  delay(250);
  beep(d, 250);
  beep(d, 250);
  beep(d, 250);
  delay(250);
  beep(f, 500);
  beep(l, 1250);
  delay(500);
  beep(f, 250);
  beep(f, 250);
  beep(m, 250);
  beep(m, 250);
  beep(r, 250);
  beep(r, 250);
  beep(d, 1000);
  delay(250);
  beep(d, 250);
  beep(d, 250);
  beep(d, 250);
  beep(m, 500);
  delay(250);
  beep(s, 250);
  delay(250);
  delay(250);
  beep(d, 250);
  beep(d, 250);
  beep(d, 250);
  beep(m, 500);
  delay(250);
  beep(s, 1250);
  delay(500);
  beep(Do, 250);
  beep(Re, 250);
  beep(Do, 250);
  beep(lS, 250);
  beep(l, 250);
  beep(s, 250);
  beep(f, 500);
  delay(2000);
  beep(d, 250);
  beep(d, 250);
  beep(f, 250);
  beep(f, 250);
  beep(l, 250);
  beep(l, 250);
  beep(Do, 500);
  delay(250);
  beep(l, 1250);
  delay(250);
  beep(Do, 500);
  beep(Re, 250);
  beep(Do, 250);
  beep(lS, 250);
  beep(l, 250);
  beep(Do, 250);
  beep(lS, 500);
  delay(250);
  beep(s, 1250);
  delay(500);
  beep(d, 250);
  beep(d, 250);
  beep(m, 250);
  beep(m, 250);
  beep(s, 250);
  beep(s, 250);
  beep(lS, 500);
  delay(250);
  beep(s, 1250);
  delay(250);
  beep(Do, 500);
  beep(Re, 250);
  beep(Do, 250);
  beep(lS, 250);
  beep(l, 250);
  beep(s, 250);
  beep(f, 1000);
  delay(2000);

}

void TheRainsofCastamere() {
  
  beep(la, 500);
  beep(f, 750);
  beep(la, 250);
  beep(m, 750);
  beep(la, 250);
  beep(f, 500);
  beep(s, 500);
  beep(m, 750);
  beep(la, 250);
  beep(s, 500);
  beep(f, 500);
  beep(m, 500);
  beep(r, 500);
  beep(m, 2000); 
  beep(l, 250);
  beep(l, 500);
  beep(lS, 250);
  beep(s, 500);
  beep(d, 250);
  beep(d, 250);
  beep(l, 500);
  beep(lS, 500);
  beep(s, 750);
  beep(l, 250);
  beep(lS, 500);
  beep(l, 500);
  beep(s, 500);
  beep(f, 500);
  beep(m, 1500);
  beep(la, 250);
  beep(la, 250); 
  beep(f, 750);
  beep(la, 125);
  beep(m, 750);
  beep(la, 250);
  beep(f, 500);
  beep(s, 500);
  beep(m, 750);
  beep(la, 250);
  beep(s, 500);
  beep(f, 500);
  beep(m, 500);
  beep(r, 500);
  beep(m, 1500);
  beep(d, 500);
  beep(l, 750);
  beep(lS, 250);
  beep(s, 750);
  beep(d, 250); 
  beep(l, 500);
  beep(lS, 500);
  beep(s, 750);
  beep(l, 250);
  beep(lS, 500);
  beep(l, 500);
  beep(s, 500);
  beep(f, 500);
  beep(m, 1500);
  beep(d, 500);
  beep(l, 750);
  beep(lS, 250);
  beep(s, 750);
  beep(d, 250);
  beep(l, 500);
  beep(lS, 500);
  beep(s, 750);
  beep(l, 250);
  beep(lS, 500);
  beep(l, 500);
  beep(s, 500);
  beep(f, 500);
  beep(r, 2000);

  delay(1500);

  beep(la, 500);
  beep(m, 250);
  beep(f, 250);
  beep(r, 1000);
  beep(f, 500);
  beep(f, 250);
  beep(m, 250);
  beep(la, 1000);
  delay(250);
  beep(la, 250);
  beep(f, 250);
  beep(f, 250);
  beep(r, 1000);
  beep(f, 500);
  beep(f, 250);
  beep(m, 1250);
  beep(la, 500);
  beep(m, 250);
  beep(f, 250);
  beep(r, 1000);
  beep(l, 500);
  beep(l, 500);
  beep(s, 500);
  beep(r, 750);
  beep(f, 250);
  beep(f, 750);
  beep(r, 250);
  beep(m, 750);
  beep(f, 250);
  beep(r, 1500);
  beep(la, 500);
  beep(m, 250);
  beep(f, 250);
  beep(l, 500);
  beep(l, 500);
  beep(s, 500);
  beep(r, 750);
  beep(f, 250);
  beep(f, 750);
  beep(r, 250);
  beep(l, 250);
  beep(s, 250);
  beep(m, 250);
  beep(f, 250);
  beep(r, 2000);
}
void StarWars() {
   
    beep( a, 500); 
    beep( a, 500);     
    beep( a, 500); 
    beep( f, 350); 
    beep( cH, 150);
    
    beep( a, 500);
    beep( f, 350);
    beep( cH, 150);
    beep( a, 1000);
    
    
    beep( eH, 500);
    beep( eH, 500);
    beep( eH, 500);    
    beep( fH, 350); 
    beep( cH, 150);
    
    beep(gS, 500);
    beep( f, 350);
    beep( cH, 150);
    beep( a, 1000);
    
    
    beep( aH, 500);
    beep( a, 350); 
    beep( a, 150);
    beep( aH, 500);
    beep( gSH, 250); 
    beep( gH, 250);
    
    beep( fSH, 125);
    beep( fH, 125);    
    beep( fSH, 250);
    delay(250);
    beep( aS, 250);    
    beep( dSH, 500);  
    beep( dH, 250);  
    beep( cSH, 250);  
    
    
    beep(cH, 125);  
    beep( b, 125);  
    beep( cH, 250);      
    delay(250);
    beep( f, 125);  
    beep( gS, 500);  
    beep( f, 375);  
    beep( a, 125); 
    
    beep( cH, 500); 
    beep( a, 375);  
    beep( cH, 125); 
    beep(eH, 1000); 
    
    beep( aH, 500);
    beep( a, 350); 
    beep( a, 150);
    beep( aH, 500);
    beep( gSH, 250); 
    beep(gH, 250);
    
    beep(fSH, 125);
    beep( fH, 125);    
    beep( fSH, 250);
    delay(250);
    beep(aS, 250);    
    beep( dSH, 500);  
    beep( dH, 250);  
    beep( cSH, 250);  
    
    
    beep( cH, 125);  
    beep( b, 125);  
    beep( cH, 250);      
    delay(250);
    beep( f, 250);  
    beep( gS, 500);  
    beep( f, 375);  
    beep( cH, 125); 
           
    beep(a, 500);            
    beep(f, 375);            
    beep( c, 125);            
    beep( a, 1000);      
}

Source : Singing Arduino


About The Author

Ibrar Ayyub

I am an experienced technical writer holding a Master's degree in computer science from BZU Multan, Pakistan University. With a background spanning various industries, particularly in home automation and engineering, I have honed my skills in crafting clear and concise content. Proficient in leveraging infographics and diagrams, I strive to simplify complex concepts for readers. My strength lies in thorough research and presenting information in a structured and logical format.

Follow Us:
LinkedinTwitter

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top