Polydexter was the introductory project in the Creative Architecture Machines (CAM) advanced options architecture studio at the California College of the Arts (CCA), taught by Jason Kelly Johnson (co-founder of Future Cities Lab) and Michael Shiloh. Parts developed for this robot would go on to become integral in the second project of the studio, our […]
Polydexter: Arduino Robotic Translation Arm Continue Reading
The Boot Bot Shield lets you burn the arduino boootloader onto a blank Atmega 328 chip. The bootloader is that magic piece of software that turns a mundane chip into the open source programmable miracle known as the arduino. Blank chips cost a few dollars less per chip than bootloaded ones. With the Boot Bot
I want to make a robo arm with less cost which draw cute pictures. That robot want to make my Daughter happy and it can able to dance. I saw a Cutest drawing robot in Kickstarter. I like it very much and want to make one such robot. So i go through my school life
Cute Drawing Buddy V1, SCARA Robot – Arduino Continue Reading
A friend gave me one of Adafruit’s circuit playgrounds (developer edition) to use, and I wanted to see would it make a good robot controller. The circuit playground is packed full of features like sensors, neo-pixels and even an accelerometer. I wanted to add a L9110 motor controller and create a small bot I could
Adafruit’s Circuit Playground As a Robot Controller With Bluetooth Continue Reading
Many years back when I was still quite heavily involved in the day-to-day company IT matters, we need to subscribe to a service called “Smart Finger” when we put our servers in a datacenter. Basically what this service is all about is to allow datacenter technician to help us to press the power or reset
Simple IoT Remote Switch With MQTT and ESP8266 Continue Reading
The objective is to construct a programmable hobby bot that is affordable and simple to make. The parts will be purchased from places such as Wal-Mart, Radio-Shack, any Hobby Store, or online store that is accessible to the public. The price range is 50 dollars or lower for the entirety of the robot. Step 1:
Hello, In this post we”ll be making a Six wheel drive all terrain vehicle (ATV). These are rare and hence expensive robots (at least in India). I made this ATV as my summer project. Dagu manufactures a similar 6WD chassis but its way too expensive (Rs 20000 / $ 250). So I decided to make
Six wheeled All Terrain Vehicle (6WD) using Arduino Continue Reading
In this Instructable we’ll make a robot (more like a RC car) which is controlled by voice i.e. Voice Recognition. Before I start to give you any further details one must know that this is Voice Recognition and not Speech Recognition that means the controller does not understands what you are speaking. This project uses
Have you ever given something to someone and wished that the box you gave it in opened automatically? No? Well neither have I (well, maybe) :D. However if you have, this is the guide for you! With just a flick of a switch the box will open automatically! Step 1: Tools & Materials Step 2:
This instructable assumes very little with respect to prior knowledge. If there are any areas you feel could be improved or clarified, please feel free to message or comment and I will update. Here are all the details you need to produce a simple wall avoiding robot. Along the way you will have the chance
