Preliminary Investigation on the Geometric Accuracy of 3D Printed Dental Implant Using a Monkey Maxilla Incisor Model
![](https://article.accscience.com/imageFile/by.png)
Additive manufacturing has proven to be a viable alternative to conventional manufacturing methodologies for metallic implants due to its capability to customize and fabricate novel and complex geometries. Specific to its use in dental applications, various groups have reported successful outcomes for customized root-analog dental implants in preclinical and clinical studies. However, geometrical accuracy of the fabricated samples has never been analyzed. In this article, we studied the geometric accuracy of a 3D printed titanium dental implant design against the tooth root of the monkey maxilla incisor. Monkey maxillas were scanned using cone-beam computed tomography, then segmentation of the incisor tooth roots was performed before the fabrication of titanium dental implants using a laser powder bed fusion (PBF) process. Our results showed 68.70% ± 5.63 accuracy of the 3D printed dental implant compared to the actual tooth (n = 8), where main regions of inaccuracies were found at the tooth apex. The laser PBF fabrication process of the dental implants showed a relatively high level of accuracy of 90.59% ± 4.75 accuracy (n = 8). Our eventual goal is to develop an accurate workflow methodology to support the fabrication of patient-specific 3D-printed titanium dental implants that mimic patients’ tooth anatomy and fit precisely within the socket upon tooth extraction. This is essential for promoting primary stability and osseointegration of dental implants in the longer term.
1. Tofail SA, Koumoulos EP, Bandyopadhyay A, et al., 2018. Additive Manufacturing: Scientific and Technological Challenges, Market Uptake and Opportunities. Mater Today, 21:22–37. https://doi.org/10.1016/j.mattod.2017.07.001
2. Ryan G, Pandit A, Apatsidis DP, 2006. Fabrication Methods of Porous Metals for Use in Orthopaedic Applications. Biomaterials, 27:2651–70. https://doi.org/10.1016/j.biomaterials.2005.12.002
3. Bose S, Roy M, Bandyopadhyay A, 2012. Recent Advances in Bone Tissue Engineering Scaffolds. Trends Biotechnol, 30:546–54. https://doi.org/10.1016/j.tibtech.2012.07.005
4. Bai CG, Chen X, Sun Y, et al., 2019. Additive Manufacturing of Customized Metallic Orthopedic Implants: Materials, Structures, and Surface Modifications. Metals, 9:1004. https://doi.org/10.3390/met9091004
5. Ni J, Ling H, Zhang S, et al., 2019. Three-dimensional Printing of Metals for Biomedical Applications. Mater Today Bio, 3:100024. https://doi.org/10.1016/j.mtbio.2019.100024
6. Lowther M, Louth S, Davey A, et al., 2019. Clinical, Industrial, and Research Perspectives on Powder bed Fusion Additively Manufactured Metal Implants. Addit Manuf, 28:565–84. https://doi.org/10.1016/j.addma.2019.05.033
7. Sing SL, An J, Yeong WY, et al., 2016. Laser and Electronbeam Powder-bed Additive Manufacturing of Metallic Implants: A Review on Processes, Materials and Designs. J Orthop Res, 34:369–85. https://doi.org/10.1002/jor.23075
8. Sing SL, Huang S, Goh GD, et al., 2021. Emerging Metallic Systems for Additive Manufacturing: In-situ Alloying and Multi-metal Processing in Laser Powder Bed Fusion. Prog Mater Sci, 119:100795. https://doi.org/10.1016/j.pmatsci.2021.100795
9. Wu H, Ren Y, Ren J, et al., 2020. Effect of Melting Modes on Microstructure and Tribological Properties of Selective Laser Melted AlSi10Mg Alloy. Virtual Phys Prototyp, 15:570–82. https://doi.org/10.1080/17452759.2012.673152
10. Sing SL, Kuo CN, Shih CT, et al., 2021. Perspectives of Using Machine Learning in Laser Powder Bed Fusion for Metal Additive Manufacturing. Virtual Phys Prototyp, 16:372–86. https://doi.org/10.1080/17452759.2021.1944229
11. Chahal V, Taylor RM, 2020. A Review of Geometric Sensitivities in Laser Metal 3D Printing. Virtual Phys Prototyp, 15:227–41. https://doi.org/10.1080/17452759.2019.1709255
12. Figliuzzi M, Mangano F, Mangano C, 2012. A Novel Root Analogue Dental Implant Using CT Scan and CAD/CAM: Selective Laser Melting Technology. Int J Oral Maxillofac Surg, 41:858–62. https://doi.org/10.1016/j.ijom.2012.01.014
13. Moin DA, Hassan B, Parsa A, et al., 2012. Accuracy of Preemptively Constructed, Cone Beam CT-, and CAD/CAM Technology-based, Individual Root Analogue Implant Technique: An In Vitro Pilot Investigation. Clin Oral Implants Res, 25:598–602. https://doi.org/10.1111/clr.12104
14. Moin DA, Hassan B, Mercelis P, et al., 2011, Designing a Novel Dental Root Analogue Implant Using Cone Beam Computed Tomography and CAD/CAM Technology. Clin Oral Implants Res, 24:25–7. https://doi.org/10.1111/j.1600-0501.2011.02359.x
15. Chen J, Zhang Z, Chen X, et al., 2014. Design and Manufacture of Customized Dental Implants by Using Reverse Engineering and Selective Laser Melting Technology. J Prosthet Dent, 112:1088–95.e1081. https://doi.org/10.1016/j.prosdent.2014.04.026
16. Li J, Hu J, Zhu Y, Yu X, et al., 2020. Surface Roughness Control of Root Analogue Dental Implants Fabricated Using Selective Laser Melting. Addit Manuf, 34:101283. https://doi.org/10.1016/j.addma.2020.101283
17. Li XC, He L, Zhang JW, et al., 2021. Additive Manufacturing of Dental Root-Analogue Implant with Desired Properties. Mater Technol, 36:894–906. https://doi.org/10.1080/10667857.2020.1859054
18. Guo F, Hu M, Wang C, et al., 2020. Studies on the Performance of Molar Porous Root-Analogue Implant by Finite Element Model Simulation and Verification of a Case Report. J Oral Maxillofac Surg, 78:e1961–5.e9. https://doi.org/10.1016/j.joms.2020.06.002
19. Song K, Wang Z, Lan J, et al., 2021. Porous Structure Design and Mechanical Behavior Analysis Based on TPMS for Customized Root Analogue Implant. J Mech Behav Biomed Mater, 115:104222. https://doi.org/10.1016/j.jmbbm.2020.104222
20. Bhola M, Neely AL, Kolhatkar S, 2008. Immediate Implant Placement: Clinical Decisions, Advantages, and Disadvantages. J Prosthodont, 17:576–81. https://doi.org/10.1111/j.1532-849X.2008.00359.x
21. Friberg B, Jemt T, Lekholm U, 1991. Early Failures in 4,641 Consecutively Placed Branemark Dental Implants: A Study from Stage 1 Surgery to the Connection of Completed Prostheses. Int J Oral Maxillofac Implants, 6:142–6.
22. Cobo-Vazquez C, Reininger D, Molinero-Mourelle P, et al., 2018. Effect of the Lack of Primary Stability in the Survival of Dental Implants. J Clin Exp Dent, 10:e14–9. https://doi.org/10.4317/jced.54441 https://doi.org/10.1016/j.ijom.2012.01.014
23. Albrektsson T, Albrektsson B, 1987. Osseointegration of Bone Implants. A Review of an Alternative Mode of Fixation. Acta Orthop Scand, 58:567–77. https://doi.org/10.3109/17453678709146401
24. Branemark PI, Hansson BO, Adell R, et al., 1977. Osseointegrated Implants in the Treatment of the Edentulous Jaw. Experience from a 10-Year Period. Scand J Plast Reconstr Surg Suppl, 16:1–132.
25. Albrektsson T, Branemark PI, Hansson HA, et al., 1981. Osseointegrated Titanium Implants. Requirements for Ensuring a Long-lasting, Direct Bone-to-implant Anchorage in Man. Acta Orthop Scand, 52:155–70.
26. Wong KC, 2016. 3D-printed Patient-specific Applications in Orthopedics. Orthop Res Rev, 8:57–66. https://doi.org/10.2147/ORR.S99614
27. Meng L, McWilliams B, Jarosinski W, et al., 2020. Machine Learning in Additive Manufacturing: A Review. J Min Metals Mater Soc, 72:2363–77. https://doi.org/10.1007/s11837-020-04155-y
28. Ng WL, Chan A, Ong YS, et al., 2020. Deep Learning for Fabrication and Maturation of 3D Bioprinted Tissues and Organs. Virtual Phys Prototyp, 15:340–58. https://doi.org/10.1080/17452759.2020.1771741
29. Lia JH, Zhu Y, Yu X, et al., 2020. Surface Roughness Control of Root Analogue Dental Implants Fabricated Using Selective Laser Melting. Addit Manuf, 34:101283. https://doi.org/10.1016/j.addma.2020.101283