Figures
Abstract
Phytophthora root rot caused by Phytophthora capsici (P. capsici) is a serious limitation to pepper production in Southern China, with high temperature and humidity. Mapping PRR resistance genes can provide linked DNA markers for breeding PRR resistant varieties by molecular marker-assisted selection (MAS). Two BC1 populations and an F2 population derived from a cross between P. capsici-resistant accession, Criollo de Morelos 334 (CM334) and P. capsici-susceptible accession, New Mexico Capsicum Accession 10399 (NMCA10399) were used to investigate the genetic characteristics of PRR resistance. PRR resistance to isolate Byl4 (race 3) was controlled by a single dominant gene, PhR10, that was mapped to an interval of 16.39Mb at the end of the long arm of chromosome 10. Integration of bulked segregant analysis (BSA) and Specific Length Amplified Fragment sequencing (SLAF-seq) provided an efficient genetic mapping strategy. Ten polymorphic Simple Sequence Repeat (SSR) markers were found within this region and used to screen the genotypes of 636 BC1 plants, delimiting PhR10 to a 2.57 Mb interval between markers P52-11-21 (1.5 cM away) and P52-11-41 (1.1 cM). A total of 163 genes were annotated within this region and 31 were predicted to be associated with disease resistance. PhR10 is a novel race specific gene for PRR, and this paper describes linked SSR markers suitable for marker-assisted selection of PRR resistant varieties, also laying a foundation for cloning the resistance gene.
Citation: Xu X, Chao J, Cheng X, Wang R, Sun B, Wang H, et al. (2016) Mapping of a Novel Race Specific Resistance Gene to Phytophthora Root Rot of Pepper (Capsicum annuum) Using Bulked Segregant Analysis Combined with Specific Length Amplified Fragment Sequencing Strategy. PLoS ONE 11(3): e0151401. https://doi.org/10.1371/journal.pone.0151401
Editor: Mark Gijzen, Agriculture and Agri-Food Canada, CANADA
Received: August 26, 2015; Accepted: February 26, 2016; Published: March 18, 2016
Copyright: © 2016 Xu et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Data Availability: All relevant data are within the paper and its Supporting Information files.
Funding: Support was provided by: Guangdong Natural Science Foundation (2014A030310321) XMX; Guangdong Academy of Agricultural Sciences Dean Fund (201304) XMX; Guangzhou Science and Technology Program key projects (2014Y2-00112) YL; Guangdong Science and Technology Project (2015B0202009) YL; Common key technology research of Guangdong Lingnan characteristic vegetable Crossbreeding (2012A020100006) SBL; and Guangdong Science and Technology Project (2014A020208045) XWX.
Competing interests: The authors have declared that no competing interests exist.
Introduction
Phytophthora blight, caused by Phytophthora capsici (Leon.), is one of the most destructive pepper diseases worldwide [1]. Depending on the point of infection, P. capsici may cause several different disease syndromes, including root rot, stem rot, fruit rot and foliar blight in pepper [2]. Phytophthora root rot (PRR) of pepper, usually causing plant death, is the most serious pepper disease and may lead to total crop failure [3]. Currently, chemical control is the main management strategy for PRR, which not only increases production costs, but also results in environmental pollution. Utilization of resistant varieties is the most economical and environmentally friendly strategy to prevent this disease [4].
Host resistance, one form of disease resistance in plants, is characterized by specific plant varieties resisting infection by one or a few pathogenic races but being susceptible to other races [5]. Though the inheritance of resistance to P. capsici in pepper is complex and differs among plant populations, disease screening conditions and pathogen isolates, two distinct types of host resistance to P. capsici on pepper have been reported: (1) race-specific resistance controlled by a single dominant gene [2, 6, 7] and (2) partial resistance conferred by quantitative trait loci (QTLs) acting together [8–10].
Identification and mapping of resistance genes and QTLs conferring partial resistance to P. capsici in pepper is a prerequisite to MAS for P. capsici resistance. To date, almost one hundred QTLs for P. capsici resistance in pepper have been identified [8–15]. The majority of the QTLs have been identified on chromosome 5, and are considered to reflect a major effect locus that has been detected in all of the resistant pepper accessions studied to date [16]. Several types of linked markers for this major QTL have been developed, including Sequence Characterized Amplified Region (SCAR) and Randomly Amplified Polymorphic DNA (RAPD) markers [17, 18], Bacterial Artificial Chromosome (BAC)-derived markers [11] and recently developed SNP markers [19]. These diagnostic markers offer promise toward MAS for P. capsici resistance in pepper. In contrast to several recent reports of QTLs conferring partial resistance to P. capsici, no race-specific resistance gene has been identified, although resistance against P. capsici in pepper had been reported to be controlled by a single dominant gene [2, 6, 7]. Interestingly, a novel gene that inhibits resistance to P. capsici (Ipcr) was found in a P. capsici-susceptible accession, NMCA10399 [20]. When the most P. capsici-resistant accession, CM334 [21], was hybridized with NMCA10399, the resultant F1 populations were completely susceptible and the F2 displayed a 3:13 (R: S) segregation ratio to P. capsici-induced root rot and foliar blight disease, indicating that the Ipcr gene has an epistatic dominant effect over the dominant resistance genes for root rot and foliar blight.
Bulked segregant analysis (BSA), first proposed by Michelmore et al. [22], has been used for more than 20 years to identify molecular markers linked to a target gene or major QTL affecting a trait of interest [23–25]. BSA is a rapid and effective method that involves genotyping only two bulked DNA samples, respectively from groups of individuals with distinct phenotypes (for example, resistant and susceptible). However, it is a challenge for researchers to develop thousands of candidate molecular markers to screen the pools to find a small subset of markers diagnostic of the target phenotype.
A newly developed technology, SLAF-seq, combines high-throughput and reduced representation library (RRL) sequencing, offering an efficient and high-resolution strategy for genome-wide genotyping [26]. SLAF-seq has been used for genetic map construction and QTL analysis in sesame [27], soybean [28, 29] and cucumber [30, 31]. New strategies have recently been proposed to take advantage of the power of both BSA and SLAF-seq technologies. Two examples have been reported, delineating a maize inflorescence meristem mutant to a region of 3.947 Mb [32], and identifying major QTLs associated with rice grain weight [33].
In the present study, we aimed to (1) investigate the inheritance mode of PRR resistance against a specific race of P. capsici, (2) find PRR resistance gene-containing regions by integrating BSA with SLAF-seq technology, (3) develop SSR markers and segregating populations to carry out linkage analysis and narrow down the size of the gene-containing regions, providing diagnostic SSR markers for MAS of PRR resistant varieties and laying a foundation for cloning the resistance gene.
Materials and Methods
Plant materials and growth conditions
CM334, a landrace from Mexico, with the highest known resistance to P. capsici, was used as resistant parent (female) and NMCA10399, a P. capsici-susceptible accession [20], was used as susceptible parent (male). Derived from CM334 and NMCA10399, two BC1 populations, (CM334×NMCA10399)×CM334, comprising 222 plants and (CM334×NMCA10399)×NMCA10399, of 372 individuals, respectively, and an CM334×NMCA10399 F2 population of 259 plants were used for genetic analysis. After genetic analysis of PRR resistance, a third BC1 population [(CM334×NMCA10399)×NMCA10399] of 436 individuals was then used to screen for PRR-resistant or PRR-susceptible plants to construct a resistant DNA pool (R-pool) and a susceptible DNA pool (S-pool). According to the result of marker-trait association, a fourth BC1 population [(CM334×NMCA10399)×NMCA10399] of 636 individuals was genotyped and phenotyped to finely map the PRR resistance gene. All plant materials were grown in 32-cell plastic trays filled with plant growth medium (Floragard, Germany). Three seeds per cell were sown. Seedlings were watered twice a day and kept in a greenhouse in which P. capsici is not normally encountered, at 25±5 and 18±5°C day and night temperatures, respectively, with a 12-h photoperiod. Plants were kept in the greenhouse until the four-to-six true leaf stage before treatment with P. capsici.
Phenotype screening of PRR resistance
P. capsici isolate Byl4 was used as inoculum for PRR resistance screening. Byl4, which is identified as race 3 (data not show) was isolated from infected pepper plants in 2012 in Baiyun field, Guangzhou, Guangdong province, China. To screen for PRR reaction, plants at the four-to-six true leaf stage were tested as described by Bosland and Lindsey [3] with modifications. The plants grown individually in 32-cell plastic trays were watered 12h before inoculation, and then the soil of each cell was injected with 5 ml inoculum, counted with Bright-Line™ Hemacytometer (Hausser Scientific, USA), in a concentration of 1 × 104 zoospores/ml. The treated plants were kept in a controlled plant growth chamber (RTOP-1000Y), at 25°C in darkness for 24h with 80% relative humidity, and then kept at 25°C with 14-h light and 10-h dark cycle. The plants were scored for PRR when the stem of susceptible control NMCA10399 become tan or slightly darkened at the soil line, about 3 days after treatment. We scored once a day until all susceptible control plants showed symptoms (about 10 days after treatment). The plants with no symptoms were considered resistant, while plants showing symptoms ranging from slight root-stem darkening to death were all considered susceptible.
DNA extraction and pool construction
Total genomic DNA was isolated from young leaves of parents and BC1 plants using a CTAB (cetyl trimethylammonium bromide) method with minor modifications [34]. DNA was quantified using a NanoDrop 2000 spectrophotometer (Thermo Scientific, USA). Fifty PRR resistant plants and fifty susceptible plants were selected from the BC1 population of 436 individuals and equal amounts of DNA from each plant were mixed to form the R-pool and S-pool, respectively, at a final concentration of 40 ng/μl.
SLAF library construction and sequencing
The present study used the reference genome of CM334, with an assembled size of 3.06 Gb (http://peppergenome.snu.ac.kr/, V. 1.55). A simulated restriction enzyme digestion was carried out to establish conditions to optimize SLAF yield, avoid repetitive SLAFs, and obtain an even distribution of SLAFs for maximum SLAF-seq efficiency. Based on the results of this preliminary experiment, genomic DNA of two parents and pools were digested with the HaeIII restriction enzyme, and Arabidopsis thaliana was used as control to assess the effectiveness of enzyme digestion. The SLAF libraries were constructed according to procedures described by Sun et al. [26]. The average SLAF sequencing depth should be at least 10x for each parent to cover all SNP sites, and 1x for each progeny (50 progenies for each pool) to eliminate background noises. To obtain higher coverage for pools, more samples of pool libraries should be added in the final solution than of the parents when sequenced. DNA fragments of 314-364bp were selected as SLAFs and prepared for paired-end sequencing on an Illumina High-seq 2500 platform (Illumina, Inc.; San Diego, CA, US) at Beijing Biomarker Technologies Corporation (http://www.biomarker.com.cn).
Sequence data analysis and SLAF definition
Raw sequence reads (101bp in length) were filtered and trimmed for quality and adaptor removal, with 80-bp paired sequences retained at each end. The trimmed reads were then clustered based on sequence similarity (90% identity) among the four libraries (two parents and two pools) by BLAST as described by Kent [35]. All SLAFs were used to estimate sequence depth of parents and pools. SLAFs were defined based on parental sequences and pools were genotyped based on similarity to parental sequences. As a diploid species, pepper SLAFs with more than 4 tags were defined as repetitive SLAFs, those with only 1 tag were defined as monomorphic SLAFs, and those with 2–4 tags were polymorphic SLAFs. High-quality polymorphic SLAFs for which parents are both homozygous and with a summed sequence depth more than 5 fold were used for association studies.
Association analysis
The SNP-index algorithm is a method useful to find significant differences of genotype frequency between DNA pools. As an SNP-index method [36], we used SLAF depth within a DNA pool as genotype frequency. The Δ(SNP-index) was calculated based on SNP-index (Rp) = SRp/(SRp+RRp), and SNP-index (Sp) = SSp/(SSp+RSp), with Δ(SNP-index) = SNP-index (Sp)- SNP-index (Rp). RRp and SRp represent the depth of the R-pool derived from resistant and susceptible parents, respectively; and RSp and SSp indicate the depth of the S-pool derived from resistant and susceptible parents, respectively. As we used a BC1 population for mapping, the upper limit Δ(SNP-index) of the trait—associated SLAFs is expected to be 0.5. We carried out Loess regression fitting to determine and obtain the threshold for significance of marker-trait associations as described by Hill et al. [37]. The regions over the threshold were considered as trait related candidate regions.
SSR marker development and genotyping
The genome sequences of the PRR resistance related regions were downloaded from the CM334 reference genome (http://peppergenome.snu.ac.kr/). SSRHunter 1.3 [38] was used to find SSR sites and Primer Premier 5.0 (Premier Biosoft International) was used to design SSR primers. All SSR markers were screened for polymorphisms among parents and the two DNA pools. SSR markers which were polymorphic between both the two parents and the two pools were used to genotype the BC1 population of 636 individuals. PCR was performed as described by Piquemal et al. [39] with minor modifications: 94°C for 5 min; 8 cycles of 94°C for 35 s, 57°C for 30 s and 72°C for 30 s; followed by 8 cycles of 94°C for 35 s, 53°C for 30 s and 72°C for 30 s; then 20 cycles of 94°C for 35 s, 55°C for 30 s and 72°C for 30 s, and a final incubation at 72°C for 7 min. PCR products were separated on an 8% polyacrylamide denaturing sequencing gel and visualized by silver nitrate staining.
Genetic analysis and linkage map construction
To determine the mode of inheritance of PRR resistance, Chi-squared (χ2) analysis was carried out to test the phenotypic data for goodness-of-fit to Mendelian segregation ratios. Using the phenotype and genotype data from the 636 BC1 plants, a linkage map was constructed with Mapmaker/EXP 3.0 [40], using a LOD threshold of 3.0.
Results
Genetic analysis of PRR resistance
Two BC1 populations and an F2 population derived from a cross between CM334 and NMCA10399 were used to investigate the genetic characteristics of PRR resistance. In phenotype screening experiments, all 41 plants of the resistant parent (CM334) showed resistance with no lesions observed, while the 66 plants of the susceptible parent (NMCA10399) were all dead 9 days after treatment (Fig 1). The backcross population, (CM334×NMCA10399)×CM334, comprising 222 plants, all displayed resistance. Among the other backcross population, (CM334×NMCA10399)×NMCA10399, of 372 individuals, 177 plants showed resistance and 195 were susceptible, values which did not deviate significantly from a 1:1 segregation ratio (χ2 = 0.78, P > 0.05). Of the 259 F2 plants, 190 were resistant and 69 were susceptible, with a 2.75:1 segregation ratio that did not deviate significantly from a 3:1 ratio (χ2 = 0.29, P > 0.05). Each of these results indicated that PRR resistance to isolate Byl4 was controlled by a single dominant gene.
A, The phenotype of CM334 9 days post-inoculation. B, The phenotype of NMCA10399 9 days post-inoculation. C, Roots of CM334 9 days post-inoculation. D, Roots of NMCA10399 9 days post-inoculation. The arrows indicate the stem at the soil line.
https://doi.org/10.1371/journal.pone.0151401.g001
SLAF-seq data analysis and SLAF identification
Four samples yielded a total of 74.79 million paired-end reads with 80-bp valid read length, and an average Q30 (error rate of 0.1% per base) ratio of 86.1% (Table 1). After clustering, 250,871 SLAFs were procured. The average sequence depths of SLAFs were ~34.0 and ~23.1 fold in resistant (CM334) and susceptible parent (NMCA10399), respectively; and ~64.1 and ~58.8 fold in the R-pool and S-pool, respectively (Table 1). Mapping these SLAFs on the reference genome of CM334, we calculated the SLAF numbers on each chromosome (Table 2) and could see SLAFs distributing evenly on chromosomes (S1 Fig), suggesting good representation of the genome. These SLAFs were divided into three types: 77.94% (195,534) monomorphic, 1.77% (4,454) repetitive, and 20.28% (50,883) polymorphic. A total of 42,036 polymorphic SLAFs (Table 2, S2 Fig) for which parents are both homozygous and with a summed sequence depth more than 5 fold, were used to do marker-trait association studies.
https://doi.org/10.1371/journal.pone.0151401.t001
https://doi.org/10.1371/journal.pone.0151401.t002
Marker-trait associations
For the high-quality polymorphic SLAFs, SNP-index (Rp) and SNP-index (Sp) were calculated, used as described to determine Δ(SNP-index), and mapped to their position in the CM334 reference genome. To locate trait related candidate regions, we carried out Loess regression fitting of the Δ(SNP-index) resulting from these SLAFs. The marker-trait association threshold was 0.19 after Loess regression fitting and a total of 7,526 SLAFs exceeding the threshold level, suggesting significant differences between the pools. As a result, we found an interval of 217.17–233.56 (16.39) Mb at the end of the long arm of chromosome 10 with one hundred and thirty-nine SLAF markers consistently exceeding the association-threshold (Fig 2). In this interval, a sub-region containing three consecutive SLAFs with SNP-index (Sp) of 1 was found, suggesting the PhR10 gene may be in or very near it.
The X-axis represents chromosomal position and the Y-axis represents Δ(SNP-index). The blue dashed line indicates the association-threshold. A region related to PRR resistance was identified in pepper chromosome 10 (217.17–233.56 Mb interval) where the Δ(SNP-index) consistently exceeded the association-threshold. Higher Δ(SNP-index) indicates stronger association.
https://doi.org/10.1371/journal.pone.0151401.g002
Validation and mapping
The sequences of the PRR resistance related region (16.39 Mb) were downloaded from the CM334 reference genome (http://peppergenome.snu.ac.kr/). A total of 197 Simple Sequence Repeat (SSR) sites were found in the region by using the SSRHunter 1.3 software. Primers were designed and screened for polymorphisms between both the parents and pools. Two SSR markers polymorphic between the parents but not the pools were not used in further analysis. Only 10 SSR markers (S1 Table) were polymorphic between both the parents and the pools with heterozygous amplicons in R-pool and homozygous amplicons the same as NMCA10399 in S-pool (Fig 3), suggesting the marker and trait are associated, which confirmed the association analysis was reliable. These 10 markers were used to screen the genotypes of 636 BC1 plants used for genetic linkage analysis. The trait-related locus PhR10 was flanked by SSR markers P52-11-21 and P52-11-41 at distance of 1.5 and 1.1 cM, respectively (Fig 4).
P1, P2, PR and PS represent the resistant parent CM334, susceptible parent NMCA10399, resistant pool and susceptible pool, respectively.
https://doi.org/10.1371/journal.pone.0151401.g003
Map distance in Kosambi centiMorgans (cM) is on the left, SSR markers are arranged on the right.
https://doi.org/10.1371/journal.pone.0151401.g004
Gene annotation and candidate gene prediction
SSR markers P52-11-21 and P52-11-41 are at positions 229,191,632 and 231,757,882, respectively, delineating approximately 2.57Mb of DNA that contains PhR10. According to a pepper gene annotation database (http://peppergenome.snu.ac.kr/, V. 1.55), 163 genes were annotated within this region. Among these genes, 31 were predicted to be associated with disease resistance (S2 Table).
Discussion
The genome size of pepper is large, estimated to be 3.48 Gb [41]. Whole genome deep re-sequencing or low coverage sequencing is relatively costly for large genomes and usually unnecessary for gene/QTL mapping. RRL sequencing is one strategy to bring down the cost by genome reduction, sampling and sequencing a small subset of genomic segments instead of the whole genome [42]. SLAF-seq is a recently developed enhanced RRL sequencing strategy for genome-wide SNP discovery and has been used for linkage map construction and QTL analysis in organisms such as sesame [27], soybean [28, 29] and cucumber [30, 31]. In this study, we used BSA combined with SLAF-seq strategy to do preliminary mapping of PRR resistance gene, generating a total of 74.79 million paired-end reads with 80-bp valid read length, developing 50,883 (20.28%) polymorphic SLAFs with the proportion of polymorphic SLAFs ranging from 8.11% (1,750 of 21,568) on chromosome 8 to 44.36% (6,297 of 14,196) on chromosome 6 (Table 2), suggesting biased distribution of polymorphic markers (SLAFs) among chromosomes. This conforms to other result that chromosome 8 showed the lowest density of SNP distribution [41], indicating a relatively low evolution pressure in it. Finally, 42,036 high-quality polymorphic SLAFs were used to do marker-trait association analysis and a PRR resistance related region of 16.39Mb was found at the end of the long arm of chromosome 10. This showed that BSA combined with SLAF-seq is a rapid and effective method for initial gene mapping and laid a foundation for gene fine mapping.
To date, no race-specific resistance genes had been identified, although resistance against P. capsici in pepper had been reported to be controlled by a single dominant gene [2, 6, 7]. Results in this study showed that under the inoculation of race 3, which was the dominant physiological race of P. capsici on pepper in Guangdong province of China [43], a dominant PRR resistance gene PhR10 was identified and mapped on chromosome 10. However, interestingly, a novel gene Ipcr having an epistatic dominant effect over the dominant resistance genes for root rot and foliar blight was found by using genetic populations derived from CM334 and NMCA10399 [20], which were the same parents used in our study. At first view, it sounds inconceivable, as the methods of phenotype screening of PRR resistance were also almost the same, only with a difference in final concentration of inoculum, 5× 104 zoospores/plant in our study and 1 × 104 zoospores/plant in that. In addition, to test the effect of Ipcr on race-specific resistance, P. capsici races -1 (American Type culture Collection, ATCC: MYA-2289), -2 (ATCC: MYA-2291), and -12 (not in ATCC) isolated from C. annuum in New Mexico and race-15 (ATCC: MYA-2339) isolated from C. annuum in New Jersey were used to inoculate populations for root rot and foliar blight. Results showed that Ipcr had an epistatic dominant effect over the dominant resistance genes for root rot when treated with four races (race -1, race -2, race -12 and race -15) and only one race (races -1) for foliar blight, indicating that Ipcr interferes with tissue- and race-specific resistance for P. capsici. Therefore, we inferred that the different physiological races of P. capsici used in these two studies are the causes of different results.
The number and position of P. capsici resistance QTLs identified in a study vary depending on populations used, disease screening conditions, traits measured to reflect disease, and isolates of P. capsici. Almost one hundred QTLs for P. capsici resistance in pepper have been identified [8–15], with a consistently identified QTL on chromosome 5 considered to be a major QTL for resistance to P. capsici [16, 19]. Most other previously reported QTLs were located on chromosomes 6, 9, 11 and 12 [44]. Thabuis et al. [9] performed QTL analysis by using three different intraspecific pepper populations. Two QTLs for PRR resistance were consistent in two populations, located at the end of the short arm of chromosome 10. Additionally, three isolate-specific QTLs associated with PRR resistance were detected in the middle of chromosome 10 and another was found at the end of the short arm of chromosome 10 [8]. In the present study, a PRR resistance to P. capsici race 3 related region at the end of the long arm of chromosome 10 [217.17–233.56 (16.39) Mb] was detected by a strategy combining BSA with SLAF-seq technology, and was verified by classical genetic mapping. The location of this PRR race specific resistance gene is clearly different from previously identified QTLs on chromosome 10.
Breeding resistant cultivars remains the most effective strategy to reduce losses caused by P. capsici. Physiological race differentiation exists in the P. capsici- C. annuum interaction [45, 46] and different genes confer resistance to different physiological races of P. capsici [6]. It may be impossible to breed a resistant cultivar with universal resistance to all P. capsici races on pepper, but it may be possible to breed for resistance to isolates found in specific growing regions. In Guangdong province of China, the dominant physiological race of P. capsici on pepper is race 3 [43]. In this study, we identified a locus, PhR10, at which one allele confers resistance to P. capsici isolates Byl4 which was identified as race 3. The flanking SSR markers P52-11-21 and P52-11-41, respectively 1.5 and 1.1 cM from PhR10, will be convenient tools for MAS of PRR resistance in pepper breeding program.
Supporting Information
S1 Fig. Distribution of total SLAFs on chromosomes.
https://doi.org/10.1371/journal.pone.0151401.s001
(TIF)
S2 Fig. Distribution of high-quality polymorphic SLAFs on chromosomes.
https://doi.org/10.1371/journal.pone.0151401.s002
(TIF)
S1 Table. Description of 10 polymorphic SSR markers.
https://doi.org/10.1371/journal.pone.0151401.s003
(DOCX)
S2 Table. Annotated genes associated with disease resistance.
https://doi.org/10.1371/journal.pone.0151401.s004
(XLSX)
Acknowledgments
The authors are grateful to Paul W. Bosland of New Mexico State University for providing experimental materials including CM334 and NMCA10399.
Author Contributions
Conceived and designed the experiments: XMX YL TQW. Performed the experiments: JC XLC RW. Analyzed the data: XMX TQW XWX. Contributed reagents/materials/analysis tools: YL HMW SBL BJS. Wrote the paper: XMX TQW.
References
- 1. Leonian LH. Stem and fruit blight of peppers caused by Phytophthora capsici. Phytopathology. 1922; 9: 401–408.
- 2. Sy O, Bosland PW, Steiner R. Inheritance of phytophthora stem blight resistance as compared to phytophthora root rot and phytophthora foliar blight resistance in Capsicum annuum L. J Am Soc Hortic Sci. 2005; 1: 75–78.
- 3. Bosland PW, Lindsey DL. A seedling screen for phytophthora root rot of pepper, Capsicum annuum. Plant Dis. 1991; 10: 1048–1050.
- 4. Hausbeck MK, Lamour KH. Phytophthora capsici on vegetable crops: research progress and management challenges. Plant Dis. 2004; 12: 1292–1303.
- 5. Király L, Barna B, Király Z. Plant resistance to pathogen infection: forms and mechanisms of innate and acquired resistance. J Phytopathol. 2007; 7–8: 385–396.
- 6. Monroy-Barbosa A, Bosland PW. Genetic analysis of phytophthora root rot race-specific resistance in chile pepper. J Am Soc Hortic Sci. 2008; 6: 825–829.
- 7. Walker SJ, Bosland PW. Inheritance of phytophthora root rot and foliar blight resistance in pepper. J Am Soc Hortic Sci. 1999; 1: 14–18.
- 8. Truong HTH, Kim KT, Kim DW, Kim S, Chae Y, Park JH, et al. Identification of isolate-specific resistance QTLs to phytophthora root rot using an intraspecific recombinant inbred line population of pepper (Capsicum annuum). Plant Pathol. 2012; 1: 48–56.
- 9. Thabuis A, Palloix A, Pflieger S, Daubeze AM, Caranta C, Lefebvre V. Comparative mapping of Phytophthora resistance loci in pepper germplasm: evidence for conserved resistance loci across Solanaceae and for a large genetic diversity. Theor Appl Genet. 2003; 8: 1473–1485.
- 10. Lefebvre V, Palloix A. Both epistatic and additive effects of QTLs are involved in polygenic induced resistance to disease: a case study, the interaction pepper—Phytophthora capsici Leonian. Theor Appl Genet. 1996; 4: 503–511.
- 11. Kim HJ, Nahm SH, Lee HR, Yoon GB, Kim KT, Kang BC, et al. BAC-derived markers converted from RFLP linked to Phytophthora capsici resistance in pepper (Capsicum annuum L.). Theor Appl Genet. 2008; 1: 15–27.
- 12. Bonnet J, Danan S, Boudet C, Barchi L, Sage-Palloix AM, Caromel B, et al. Are the polygenic architectures of resistance to Phytophthora capsici and P. parasitica independent in pepper? Theor Appl Genet. 2007; 2: 253–264.
- 13. Minamiyama Y, Tsuro M, Kubo T, Hirai M. QTL Analysis for resistance to Phytophthora capsici in pepper using a high density SSR-based map. Breeding Sci. 2007; 2: 129–134.
- 14. Ogundiwin EA, Berke TF, Massoudi M, Black LL, Huestis G, Choi D, et al. Construction of 2 intraspecific linkage maps and identification of resistance QTLs for Phytophthora capsici root-rot and foliar-blight diseases of pepper (Capsicum annuum L.). Genome. 2005; 4: 698–711.
- 15. Sugita T, Yamaguchi K, Kinoshita T, Yuji K, Sugimura Y, Nagata R, et al. QTL analysis for resistance to phytophthora blight (Phytophthora capsici Leon.) using an intraspecific doubled-haploid population of Capsicum annuum. Breeding Sci. 2006; 2: 137–145.
- 16. Mallard S, Cantet M, Massire A, Bachellez A, Ewert S, Lefebvre V. A key QTL cluster is conserved among accessions and exhibits broad-spectrum resistance to Phytophthora capsici: a valuable locus for pepper breeding. Mol Breeding. 2013; 2: 349–364.
- 17. Truong HTH, Kim JH, Cho MC, Chae SY, Lee HE. Identification and development of molecular markers linked to phytophthora root rot resistance in pepper (Capsicum Annuum L.). Eur J Plant Pathol. 2013; 2: 289–297.
- 18. Quirin EA, Ogundiwin EA, Prince JP, Mazourek M, Briggs MO, Chlanda TS, et al. Development of sequence characterized amplified region (SCAR) primers for the detection of Phyto.5.2, a major QTL for resistance to Phytophthora capsici Leon. in pepper. Theor Appl Genet. 2005; 4: 605–612.
- 19. Liu WY, Kang JH, Jeong HS, Choi HJ, Yang HB, Kim KT, et al. Combined use of bulked segregant analysis and microarrays reveals SNP markers pinpointing a major QTL for resistance to Phytophthora capsici in pepper. Theor Appl Genet. 2014; 11: 2503–2513.
- 20. Reeves G, Monroy-Barbosa A, Bosland PW. A novel Capsicum gene inhibits host-specific disease resistance to Phytophthora capsici. Phytopathology. 2013; 5: 472–478.
- 21. Ortega RG, Español CP, Zueco JC. Genetics of resistance to Phytophthora capsici in the pepper line SCM-334. Plant Breeding. 1991; 1: 50–55.
- 22. Michelmore RW, Paran I, Kesseli RV. Identification of markers linked to disease-resistance genes by bulked segregant analysis: a rapid method to detect markers in specific genomic regions by using segregating populations. Proceedings of the National Academy of Sciences. 1991; 21: 9828–9832.
- 23. Chagué V, Mercier JC, Guénard M, de Courcel A, Vedel F. Identification of RAPD markers linked to a locus involved in quantitative resistance to TYLCV in tomato by bulked segregant analysis. Theor Appl Genet. 1997; 4: 671–677.
- 24. Huang Q, Li X, Chen WQ, Xiang ZP, Zhong SF, Chang ZJ, et al. Genetic mapping of a putative Thinopyrum intermedium-derived stripe rust resistance gene on wheat chromosome 1B. Theor Appl Genet. 2014; 4: 843–853.
- 25. Yi B, Chen YN, Lei SL, Tu JX, Fu TD. Fine mapping of the recessive genic male-sterile gene (Bnms1) in Brassica napus L. Theor Appl Genet. 2006; 4: 643–650.
- 26. Sun XW, Liu DY, Zhang XF, Li WB, Liu H, Hong WG, et al. SLAF-seq: an efficient method of large-scale de novo SNP discovery and genotyping using high-throughput sequencing. Plos One. 2013; 3: e58700.
- 27. Zhang YX, Wang LH, Xin HG, Li DH, Ma CX, Ding X, et al. Construction of a high-density genetic map for sesame based on large scale marker development by specific length amplified fragment (SLAF) sequencing. Bmc Plant Biol. 2013; 13: 141. pmid:24060091
- 28. Li B, Tian L, Zhang JY, Huang L, Han FX, Yan SR, et al. Construction of a high-density genetic map based on large-scale markers developed by specific length amplified fragment sequencing (SLAF-seq) and its application to QTL analysis for isoflavone content in Glycine max. Bmc Genomics. 2014; 15: 1086. pmid:25494922
- 29. Qi ZM, Huang L, Zhu RS, Xin DW, Liu CY, Han X, et al. A high-density genetic map for soybean based on specific length amplified fragment sequencing. Plos One. 2014; 8: e104871.
- 30. Wei QZ, Wang YZ, Qin XD, Zhang YX, Zhang ZT, Wang J, et al. An SNP-based saturated genetic map and QTL analysis of fruit-related traits in cucumber using specific-length amplified fragment (SLAF) sequencing. Bmc Genomics. 2014; 15: 1158. pmid:25534138
- 31. Xu XW, Xu RX, Zhu BY, Yu T, Qu WQ, Lu L, et al. A high-density genetic map of cucumber derived from Specific Length Amplified Fragment sequencing (SLAF-seq). Front Plant Sci. 2014; 5: 768.
- 32. Xia C, Chen LL, Rong TZ, Li R, Xiang Y, Wang P, et al. Identification of a new maize inflorescence meristem mutant and association analysis using SLAF-seq method. Euphytica. 2015; 1: 35–44.
- 33. Xu FF, Sun X, Chen YL, Huang Y, Tong C, Bao JS. Rapid identification of major QTLs associated with rice grain weight and their utilization. Plos One. 2015; 3: e122206.
- 34. Allen GC, Flores-Vergara MA, Krasynanski S, Kumar S, Thompson WF. A modified protocol for rapid DNA isolation from plant tissues using cetyltrimethylammonium bromide. Nat Protoc. 2006; 5: 2320–2325.
- 35. Kent WJ. BLAT—the BLAST-like alignment tool. Genome Res. 2002; 4: 656–664.
- 36. Abe A, Kosugi S, Yoshida K, Natsume S, Takagi H, Kanzaki H, et al. Genome sequencing reveals agronomically important loci in rice using MutMap. Nat Biotechnol. 2012; 2: 174–178.
- 37. Hill JT, Demarest BL, Bisgrove BW, Gorsi B, Su YC, Yost HJ. MMAPPR: mutation mapping analysis pipeline for pooled RNA-seq. Genome research. 2013; 4: 687–697.
- 38. Li Q, Wan JM. SSRHunter: development of a local searching software for SSR sites. Hereditas. 2005; 2: 808–810
- 39. Piquemal J, Cinquin E, Couton F, Rondeau C, Seignoret E, Doucet I, et al. Construction of an oilseed rape (Brassica napus L.) genetic map with SSR markers. Theor Appl Genet. 2005; 8: 1514–1523.
- 40. Lander ES, Green P, Abrahamson J, Barlow A, Daly MJ, Lincoln SE, et al. MAPMAKER: an interactive computer package for constructing primary genetic linkage maps of experimental and natural populations. Genomics. 1987; 2: 174–181.
- 41. Kim S, Park M, Yeom SI, Kim YM, Lee JM, Lee HA, et al. Genome sequence of the hot pepper provides insights into the evolution of pungency in Capsicum species. Nat Genet. 2014; 3: 270–278.
- 42. Van Tassell CP, Smith TP, Matukumalli LK, Taylor JF, Schnabel RD, Lawley CT, et al. SNP discovery and allele frequency estimation by deep sequencing of reduced representation libraries. Nat Methods. 2008; 3: 247–252.
- 43. Li ZJ, Long WP, Zheng JR, Lei JJ. Isolation and identification of Phytophthora capsici in Guangdong province and measurement of their pathogenicity and physiological race differentiation. Journal of South China Agricultural University. 2007; 1: 50–54.
- 44.
Liu WY. Comparative genetics of resistance to Phytophthora in pepper and strategies to improve marker resources. New York: Cornell University Press; 2006.
- 45. Glosier BR, Ogundiwin EA, Sidhu GS, Sischo DR, Prince JP. A differential series of pepper (Capsicum annuum) lines delineates fourteen physiological races of Phytophthora capsici. Euphytica. 2008; 1: 23–30.
- 46. da Costa Ribeiro CS, Bosland WP. Physiological race characterization of Phytophthora Capsici isolates from several host plant species in Brazil using New Mexico recombinant inbred lines of Capsicum annuum at two inoculum levels. J Am Soc Hortic Sci. 2012; 6: 421–426.