Vision guided geometric regulation of PTC frame structures
ISSN: 0143-991x
Article publication date: 28 August 2019
Issue publication date: 14 November 2019
Abstract
Purpose
Geometric structure error of parabolic trough concentrator (PTC) frame affects the installation accuracy of mirrors and absorber tubes and thus decreases the solar energy concentrating efficiency. Until now, there is no effective method to instruct the assembly and regulation of PTC frames. This paper aims to propose a vision guided method for fast and accurate regulation of mirror and absorber supports to improve the geometric quality of PTC frames.
Design/methodology/approach
The PTC frame support regulating system consists of a general-purpose online photogrammetry system, frame support measurement adaptors and data analyzing software. First, the positions and angles of all the supports are measured in real time by the online photogrammetric system. Then, the measured positions and angles are aligned to the design reference frame through the transformation calculated by an absorber position constrained nonlinear optimization so as to get the geometric errors and regulating amounts. Finally, a graduated pseudo-color-based visualization method is proposed to assist the manual or automated regulation of PTC frame supports in site.
Findings
The proposed method does not need to construct a reference system nor specify the rotation attitude of the PTC frame, and it is capable of conducting efficient and accurate regulation on PTC frame assembly line. The method is applied to manual regulation of a light type PTC frame structure. After regulation, the maximum position and angle errors of supports are reduced to less than 0.15 mm and 0.15° respectively and the intercept factor is increased to 97%, which meets the requirement for a qualified PTC concentrator.
Originality/value
To the authors’ knowledge, this paper is the first to propose a vision guided assembly or regulation method for PTC frame structures. The research uses online photogrammetry system to provide real-time geometric quality information feedback, elaborates the data analysis algorithm and provides the visualization method for accurate and efficient in site regulation. Furthermore, this paper also provides theories, methods and experiences for other applications that use vision guidance for attitude regulation and digital flexible assembly of large equipment.
Keywords
Citation
Sun, P., Lu, N., Dong, M., Lou, X. and Tan, Z. (2019), "Vision guided geometric regulation of PTC frame structures", Industrial Robot, Vol. 46 No. 6, pp. 733-739. https://doi.org/10.1108/IR-05-2018-0105
Publisher
:Emerald Publishing Limited
Copyright © 2019, Emerald Publishing Limited