Joint Optimization of Preventive Replacement and Spare Part Ordering for Single-Unit Systems With Mixed Inspections - Yongchao Liu; Guanjun Wang; Peng Liu (Qual. Reliab. Eng. Int., 2025)

Reliability analysis and optimization of multi-state tree-structured systems with performance sharing mechanism - Liudong Gu; Guanjun Wang; Yifan Zhou (Reliab. Eng. Syst. Saf., 2025)

Generalized Pólya-Process-Based Reliability Analysis for Systems Working Under Dynamic Environment - Peng Liu; Guanjun Wang (IEEE Trans. Reliab., 2025)

Spatiotemporal Causal Decoupling Model for Air Quality Forecasting - Jiaming Ma; Guanjun Wang; Sheng Huang; Kuo Yang; Binwu Wang; Pengkun Wang; Yang Wang (2025 IEEE International Conference on Acoustics, Speech and Signal Processing, ICASSP 2025, Hyderabad, India, April 6-11, 2025, 2025)

Boosting Sclera Segmentation through Semi-supervised Learning with Fewer Labels - Guanjun Wang; Lu Wang; Ning Niu; Qiaoyi Yao; Yixuan Wang; Sufen Ren; Shengchao Chen (CoRR, 2025)

Spatiotemporal Causal Decoupling Model for Air Quality Forecasting - Jiaming Ma; Guanjun Wang; Sheng Huang; Kuo Yang; Binwu Wang; Pengkun Wang; Yang Wang (CoRR, 2025)

Optimal resource allocation in common bus performance sharing systems with transmission loss - Liudong Gu; Guanjun Wang; Yifan Zhou (Qual. Reliab. Eng. Int., 2024)

Reliability optimization of multi-state systems with two performance sharing groups - Liudong Gu; Guanjun Wang; Yifan Zhou; Rui Peng (Reliab. Eng. Syst. Saf., 2024)

A condition-based maintenance policy with non-periodic inspection for k-out-of-n: G systems - Yongchao Liu; Guanjun Wang; Peng Liu (Reliab. Eng. Syst. Saf., 2024)

Optimal allocation of multi-state performance sharing systems with multiple common buses - Liudong Gu; Guanjun Wang; Yifan Zhou (Reliab. Eng. Syst. Saf., 2024)

Interpretable CNN-Multilevel Attention Transformer for Rapid Recognition of Pneumonia From Chest X-Ray Images - Shengchao Chen; Sufen Ren; Guanjun Wang; Mengxing Huang; Chenyang Xue (IEEE J. Biomed. Health Informatics, 2024)

Federated Distillation for Medical Image Classification: Towards Trustworthy Computer-Aided Diagnosis - Sufen Ren; Yule Hu; Shengchao Chen; Guanjun Wang (CoRR, 2024)

Reliability analysis for k-out-of-n(G) systems subject to dependent competing failure processes - Lina Bian; Guanjun Wang; Peng Liu (Comput. Ind. Eng., 2023)

Generalized non-renewing replacement warranty policy and an age-based post-warranty maintenance strategy - Peng Liu; Guanjun Wang (Eur. J. Oper. Res., 2023)

Formation and infrared spectroscopic characterization of carbon suboxide complexes TM-\(η\)\(^1\)-C\(_3\)O\(_2\) and the inserted ketenylidene complexes OCTMCCO (TM=Cu, Ag, Au) in solid neon - Hongmin Li; Yangyu Zhou; Guanjun Wang; Xiaoqing Zeng; Mingfei Zhou (J. Comput. Chem., 2023)

Remaining useful life evaluation for accelerated Wiener degradation process model with mixed random effects and measurement errors - Fengjun Duan; Guanjun Wang; Wanmeng Wei; Mingye Jiang (Qual. Reliab. Eng. Int., 2023)

Infrared and Visible Image Fusion Method Based on a Principal Component Analysis Network and Image Pyramid - Shengshi Li; Yonghua Zou; Guanjun Wang; Cong Lin (Remote. Sens., 2023)

SDRSwin: A Residual Swin Transformer Network with Saliency Detection for Infrared and Visible Image Fusion - Shengshi Li; Guanjun Wang; Hui Zhang; Yonghua Zou (Remote. Sens., 2023)

Displacement Monitoring of a Bridge Based on BDS Measurement by CEEMDAN-Adaptive Threshold Wavelet Method - Chunlan Mo; Huanyu Yang; Guannan Xiang; Guanjun Wang; Wei Wang; Xinghang Liu; Zhi Zhou (Sensors, 2023)

Structure Preservation and Seam Optimization for Parallax-Tolerant Image Stitching - Shaoping Wen; Xiaolei Wang; Weichao Zhang; Guanjun Wang; Mengxing Huang; Benguo Yu (IEEE Access, 2022)

Two shock models for single-component systems subject to mutually dependent failure processes - Lina Bian; Guanjun Wang; Peng Liu; Fengjun Duan (Qual. Reliab. Eng. Int., 2022)

Generalized exponential-dispersion process model for degradation analysis under nonlinear condition - Fengjun Duan; Guanjun Wang (Qual. Reliab. Eng. Int., 2022)

Minimal repair models with non-negligible repair time - Peng Liu; Guanjun Wang (Reliab. Eng. Syst. Saf., 2022)

Bayesian analysis for the transformed exponential dispersion process with random effects - Fengjun Duan; Guanjun Wang (Reliab. Eng. Syst. Saf., 2022)

CMT: Interpretable Model for Rapid Recognition Pneumonia from Chest X-Ray Images by Fusing Low Complexity Multilevel Attention Mechanism - Shengchao Chen; Sufen Ren; Guanjun Wang; Mengxing Huang; Chenyang Xue (CoRR, 2022)

Generative Adversarial Networks for Abnormal Event Detection in Videos Based on Self-Attention Mechanism - Weichao Zhang; Guanjun Wang; Mengxing Huang; Hongyu Wang; Shaoping Wen (IEEE Access, 2021)

Reliability analysis for k-out-of-(n+1): G star configuration multi-state systems with performance sharing - Peng Su; Guanjun Wang; Fengjun Duan (Comput. Ind. Eng., 2021)

Optimal replacement strategies for warranty products with multiple failure modes after warranty expiry - Peng Liu; Guanjun Wang; Peng Su (Comput. Ind. Eng., 2021)

Early Prediction of Sepsis Based on Machine Learning Algorithm - Xin Zhao; Wenqian Shen; Guanjun Wang (Comput. Intell. Neurosci., 2021)

Optimal maintenance strategies for warranty products with limited repair time and limited repair number - Peng Liu; Guanjun Wang; Peng Su (Reliab. Eng. Syst. Saf., 2021)

A New Fuzzy Logic Classifier Based on Multiscale Permutation Entropy and Its Application in Bearing Fault Diagnosis - Wenhua Du; Xiaoming Guo; Zhijian Wang; Junyuan Wang; Mingrang Yu; Chuanjiang Li; Guanjun Wang; Longjuan Wang; Huaichao Guo; Jinjie Zhou; Yanjun Shao; Huiling Xue; et al. (Entropy, 2020)

Defect feature extraction and recognition of buried pipeline based on metal magnetic memory - Yong Yang; Guan-Jun Wang; Yu Wang; Yong Wan; Yongshou Dai (Int. J. Model. Identif. Control., 2020)

Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state system with common bus performance sharing - Peng Su; Guanjun Wang; Fengjun Duan (Reliab. Eng. Syst. Saf., 2020)

Application of a Novel Adaptive Med Fault Diagnosis Method in Gearboxes - Wenhua Du; Xiaoming Guo; Xiaofeng Han; Junyuan Wang; Jie Zhou; Zhijian Wang; Xingyan Yao; Yanjun Shao; Guanjun Wang (Entropy, 2019)

Planning of step-stress accelerated degradation test based on non-stationary gamma process with random effects - Fengjun Duan; Guanjun Wang (Comput. Ind. Eng., 2018)

Inverse Gaussian process models for bivariate degradation analysis: A Bayesian perspective - Fengjun Duan; Guanjun Wang; Huan Wang (Commun. Stat. Simul. Comput., 2018)

Reliability evaluation of multi-state series systems with performance sharing - Guanjun Wang; Fengjun Duan; Yifan Zhou (Reliab. Eng. Syst. Saf., 2018)

Reliability evaluation of unrepairable k-out-of-n: G systems with phased-mission requirements based on record values - Guanjun Wang; Rui Peng; Liudong Xing (Reliab. Eng. Syst. Saf., 2018)

Correction: Yan, L., et al. A Micro Bubble Structure Based Fabry-Perot Optical Fiber Strain Sensor with High Sensitivity and Low-Cost Characteristics Sensors, 2017, 17, 555 - Lu Yan; Zhiguo Gui; Guanjun Wang; Yongquan An; Jinyu Gu; Meiqin Zhang; Xinglin Liu; Zhibin Wang; Gao Wang; Pinggang Jia (Sensors, 2018)

Exponential-Dispersion Degradation Process Models With Random Effects and Covariates - Fengjun Duan; Guan-Jun Wang (IEEE Trans. Reliab., 2018)

A Micro Bubble Structure Based Fabry-Perot Optical Fiber Strain Sensor with High Sensitivity and Low-Cost Characteristics - Lu Yan; Zhiguo Gui; Guanjun Wang; Yongquan An; Jinyu Gu; Meiqin Zhang; Xinglin Liu; Zhibin Wang; Gao Wang; Pinggang Jia (Sensors, 2017)

A High-Sensitive Pressure Sensor Using a Single-Mode Fiber Embedded Microbubble with Thin Film Characteristics - Guanjun Wang; Xinglin Liu; Zhiguo Gui; Yongquan An; Jinyu Gu; Meiqin Zhang; Lu Yan; Gao Wang; Zhibin Wang (Sensors, 2017)

Label-Free Detection of Cancer Biomarkers Using an In-Line Taper Fiber-Optic Interferometer and a Fiber Bragg Grating - Dandan Sun; Yang Ran; Guanjun Wang (Sensors, 2017)

Preventive Maintenance Models Based on the Generalized Geometric Process - Guan-Jun Wang; Yuan Lin Zhang; Richard C. M. Yam (IEEE Trans. Reliab., 2017)

Reliability Modeling of Two-Phase Gamma Degradation Process - Fengjun Duan; Guanjun Wang (2017 IEEE International Conference on Software Quality, Reliability and Security Companion, QRS-C 2017, Prague, Czech Republic, July 25-29, 2017, 2017)

Optimal replacement policy for a two-dissimilar-component cold standby system with different repair actions - Guan Jun Wang; Yuan Lin Zhang (Int. J. Syst. Sci., 2016)

Planning of step-stress accelerated degradation test based on the inverse Gaussian process - Huan Wang; Guan Jun Wang; Fengjun Duan (Reliab. Eng. Syst. Saf., 2016)

Geometric process model for a system with inspections and preventive repair - Guan Jun Wang; Yuan Lin Zhang (Comput. Ind. Eng., 2014)

Optimal repair-replacement policies for a system with two types of failures - Guan Jun Wang; Yuan Lin Zhang (Eur. J. Oper. Res., 2013)

Design and implementation of medical service robot with single arm and tracking function - Guanjun Wang; Feng Ye; Ning Zhang; Maoli Wang (IEEE International Conference on Information and Automation, ICIA 2013, Yinchuan, China, August 26-28, 2013, 2013)

An extended replacement policy for a deteriorating system with multi-failure modes - Yuan Lin Zhang; Guan Jun Wang (Appl. Math. Comput., 2011)

A bivariate optimal replacement policy for a cold standby repairable system with preventive repair - Guan Jun Wang; Yuan Lin Zhang (Appl. Math. Comput., 2011)

A Robust Paper Public-key Watermarking Based on Contourlet Algorithm Transform and its Application - Yanjun Hu; Guanjun Wang; Xinde Cao; Lei Yang (J. Softw., 2011)

Exponential stability analysis for delayed stochastic Cohen-Grossberg neural network - Guanjun Wang; Jinling Liang (Int. J. Comput. Intell. Syst., 2010)

Stability Analysis for Stochastic BAM Neural Networks with Distributed Time Delays - Guanjun Wang (Advances in Neural Networks - ISNN 2010, 7th International Symposium on Neural Networks, ISNN 2010, Shanghai, China, June 6-9, 2010, Proceedings, Part I, 2010)

Stability analysis for stochastic BAM neural networks with Markovian jumping parameters - Guanjun Wang; Jinde Cao; Ming Xu (Neurocomputing, 2009)

A geometric process repair model for a two-component system with shock damage interaction - Guan Jun Wang; Yuan Lin Zhang (Int. J. Syst. Sci., 2009)

Global dissipativity of stochastic neural networks with time delay - Guanjun Wang; Jinde Cao; Lan Wang (J. Frankl. Inst., 2009)

Interconnect crosstalk noise evaluation in deep-submicron technologies - Xiaoxiao Liu; Guangsheng Ma; Jingbo Shao; Zhi Yang; Guanjun Wang (Microelectron. Reliab., 2009)

A geometric process repair model for a repairable cold standby system with priority in use and repair - Yuan Lin Zhang; Guan Jun Wang (Reliab. Eng. Syst. Saf., 2009)

An optimal replacement policy for a two-component series system assuming geometric process repair - Guan Jun Wang; Yuan Lin Zhang (Comput. Math. Appl., 2007)

A deteriorating cold standby repairable system with priority in use - Yuan Lin Zhang; Guan Jun Wang (Eur. J. Oper. Res., 2007)

An optimal replacement policy for repairable cold standby system with priority in use - Guan Jun Wang; Yuan Lin Zhang (Int. J. Syst. Sci., 2007)

Replacement problems for a cold standby repairable system - Yuan Lin Zhang; Guan Jun Wang; Z. C. Ji (Int. J. Syst. Sci., 2006)

Optimal periodic preventive repair and replacement policy assuming geometric process repair - Guan Jun Wang; Yuan Lin Zhang (IEEE Trans. Reliab., 2006)

Parameter Estimation of the Hodgkin–Huxley Gating Model: An Inversion Procedure - Guan Jun Wang; Jacques Beaumont (SIAM J. Appl. Math., 2004)

Necessary and sufficient conditions for stability of LMS - Lei Guo; Lennart Ljung; Guan-Jun Wang (IEEE Trans. Autom. Control., 1997)