1.
|
Test of short model and prototype of the HL-LHC D2 orbit corrector based on CCT technology
/ Mangiarotti, Franco (CERN) ; Kirby, Glyn (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Mentink, Matthias (CERN) ; Fiscarelli, Lucio (CERN) ; Bajko, Marta (CERN) ; Coll, Dominic (Unlisted, GB) ; Desbiolles, Vincent (CERN) ; Feuvrier, Jerome (CERN) ; Mazet, Jacky (CERN) et al.
In the frame of the high-luminosity upgrade project for the large hadron collider, new twin aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These magnets are 2.2 m long canted cosine theta NbTi dipoles, with two independently powered apertures oriented such that their field vectors are perpendicular to each other and to the direction of the beams. [...]
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4002305
In : Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.4002305
|
|
2.
|
Test of the First Full-Length Prototype of the HL-LHC D2 Orbit Corrector Based on Canted Cosine Theta Technology
/ Mangiarotti, Franco J (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Fiscarelli, Lucio (CERN) ; Kirby, Glyn (CERN) ; Bajko, Marta (CERN) ; Coll, Dominic (Unlisted, GB) ; Desbiolles, Vincent ; Feuvrier, Jerome (CERN) ; Guyon, Jean-Luc (CERN) ; Mazet, Jacky (CERN) et al.
In the context of CERN's high-luminosity upgrade project (HL-LHC) for the Large Hadron Collider (LHC), a new double aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These 2.2 m long NbTi dipoles are built with the canted cosine theta (CCT) technique. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4000505
|
|
3.
|
Fabrication and Test of the Fourth Prototype of the D2 Orbit Corrector Dipole for HL-LHC
/ Ilardi, Veronica (CERN) ; Felice, Hélène (CERN ; IRFU, Saclay, DACM) ; Feuvrier, Jerome (CERN) ; Fiscarelli, Lucio (CERN) ; Foussat, Arnaud P (CERN) ; Kirby, Glyn (CERN) ; Kosowski, Filip (CERN) ; Mangiarotti, Franco J (CERN) ; Pincot, Francois-Olivier (CERN) ; Rogacki, Piotr T (CERN) et al.
As part of the High-Luminosity upgrade project (HL-LHC) for the Large Hadron Collider (LHC) at CERN, new double-aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These magnets are 2.2 m long Nb–Ti dipoles based on the Canted Cosine-Theta (CCT) design. [...]
2024 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4002006
|
|
4.
|
Quench Behavior of the HL-LHC Twin Aperture Orbit Correctors
/ Mentink, Matthias (CERN) ; van Nugteren, Jeroen (CERN) ; Mangiarotti, Franco (CERN) ; Duda, Michal (CERN ; Cracow, INP) ; Kirby, Glyn (CERN)
A study was performed to understand the quench behavior and ensure adequate quench protection of the canted cosine theta (CCT) twin aperture orbit corrector magnet, a superconducting magnet under development as part of the high-luminosity upgrade of the Large Hadron Collider (HL-LHC). The cosine theta geometry features canted superconducting coils, which together produce a magnetic dipole field. [...]
2018 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4004806
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4004806
|
|
5.
|
Status and challenges of the interaction region magnets for HL-LHC
/ Todesco, E (CERN) ; Izquierdo Bermudez, S (CERN) ; Foussat, A (CERN) ; Gautheron, E (CERN) ; Kirby, G (CERN) ; Felice, H (CERN) ; Perez, J C (CERN) ; Fleiter, J (CERN) ; Barth, C (CERN) ; Milanese, A (CERN) et al.
About one hundred magnets of six different types shall be installed in the High Luminosity LHC (HL-LHC) in the years 2026-2028 at CERN. The magnets design, construction and test are based on CERN collaborations with institutes and industrial partners in USA, Spain, Italy, Japan and China. [...]
FERMILAB-PUB-22-861-TD.-
2023 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4001608
Fulltext: PDF; External link: Fermilab Accepted Manuscript
|
|
6.
|
Design and Fabrication of a Canted-Cosine-Theta Double Aperture Orbit Corrector Dipole for the LHC
/ Pepitone, K (Uppsala U.) ; Kirby, G (CERN) ; Olvegård, M (Uppsala U.) ; Ahl, A (Scanditronix Instrument, Uppsala) ; Almström, M (Linnaeus U.) ; Dugic, I (Linnaeus U.) ; Emilsson, F (AMACC, Uppsala) ; Haralanova, V (Linnaeus U.) ; Johansson, M (Unlisted, SE) ; Karlsson, G (Linnaeus U.) et al.
A prototype CCT dipole magnet developed by a collaboration between Swedish universities, Swedish industry and CERN will be tested at Uppsala University. This 1 m long double-aperture magnet can provide a field strength of 3.3 T at 85 A in a 70 mm aperture with an integrated field of 2.8 Tm. [...]
2023 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4000405
In : Applied Superconductivity Conference, Honolulu, Hawaii, United States, 23 - 28 Oct 2022
|
|
7.
|
Comparison of Cold Powering Performance of 2-m-Long Nb$_{3}$Sn 11 T Model Magnets
/ Willering, Gerard (CERN) ; Bajko, Marta (CERN) ; Bajas, Hugues (CERN) ; Bordini, Bernardo (CERN) ; Bottura, Luca (CERN) ; Feuvrier, Jerome (CERN) ; Fiscarelli, Lucio (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Loffler, Christian (CERN) ; Mangiarotti, Franco (CERN) et al.
For the upgrade of the LHC, two 15-m NbTi main dipole magnets are foreseen to be replaced by two 11 T 5.7-m-long Nb$_{3}$Sn dipoles each. A series of model magnets has been produced to verify the design choices that are important for the prototype and series production, focusing on mechanical aspects and protection studies. [...]
2018 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4007205
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4007205
|
|
8.
|
Modeling Results of the Quench Behavior of a Nb-Ti Canted-Cosine-Theta Corrector Magnet for LHC
/ Bagni, T (Uppsala U.) ; Ahl, A (Scanditronix Instrument, Uppsala) ; Almström, M (Linnaeus U.) ; Canale, M (CERN) ; Dugic, I (Linnaeus U.) ; Emilsson, F (AMACC, Uppsala) ; Gentini, L (CERN) ; Haralanova, V (Linnaeus U.) ; Johansson, M (Unlisted, SE) ; Karlsson, G (Linnaeus U.) et al.
A newly designed superconducting magnet of the Canted-Cosine-Theta (CCT) type was developed as a result of a collaboration between Swedish universities (Uppsala and Linneaus) and Swedish industries. This magnet was designed to function as a replacement of the present LHC orbit corrector magnets, which are approaching their end of life due to the radiation load. [...]
2024 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4001105
|
|
9.
|
Power Tests of the First Nested Orbit Corrector Prototype for HL-LHC
/ García-Matos, Jesús A (Madrid, CIEMAT ; Madrid, Polytechnic U.) ; Calero, Jesús (Madrid, CIEMAT) ; Domínguez, Manuel Ángel (Madrid, CIEMAT) ; Fernández, Alejandro (Madrid, CIEMAT) ; Gómez, Pablo (Madrid, CIEMAT) ; García-Tabarés, Luis (Madrid, CIEMAT) ; López, Daniel (Madrid, CIEMAT) ; Martínez, Luis Miguel (Madrid, CIEMAT) ; Martínez, Teresa (Madrid, CIEMAT) ; Munilla, Javier (Madrid, CIEMAT) et al.
The first prototype of the short orbit corrector for the upgrade of the LHC has been fabricated at CIEMAT, in collaboration with CERN, in the framework of the HL-LHC project. It consists of two nested dipoles, with an aperture of 150 mm and physical length of 1.5 m. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4002005
|
|
10.
|
Test Results of the First Wax-Impregnated Nb-Ti Canted Cosine Theta Septum Magnet “SuShi”
/ Barna, D (Wigner RCP, Budapest) ; Brunner, K (Wigner RCP, Budapest) ; Borburgh, J (CERN) ; Atanasov, M (CERN) ; Lackner, F (CERN) ; Olvegård, M (Uppsala U.) ; Pepitone, K (Uppsala U.) ; Kern, Rocio Santiago (Uppsala U.) ; Svanberg, C (Uppsala U.) ; Bagni, T (Uppsala U.)
In the framework of the future circular collider study, a new septum magnet concept (“SuShi”) has been developed, and a prototype was built at Wigner RCP, and tested at the FREIA facility of Uppsala University. The concept uses a canted cosine theta (CCT)-like superconducting magnet and a passive superconducting shield to create a zero-field and high-field region within its aperture. [...]
2024 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4003105
|
|