CERN Accelerating science

CERN Document Server 找到 6 笔记录  检索需时 0.60 秒. 
1.
Developments on SRF coatings at CERN / Sublet, Alban (CERN) ; Aull, Sarah (CERN) ; Bártová, Barbora (CERN) ; Calatroni, Sergio (CERN) ; Richard, Thibaut (CERN) ; Rosaz, Guillaume (CERN) ; Taborelli, Mauro (CERN) ; Therasse, Mathieu (CERN) ; Venturini Delsolaro, Walter (CERN) ; Zhang, Pei (CERN)
The thin films techniques applied to Superconducting RF (SRF) has a long history at CERN. A large panel of cavities have been coated from LEP, to LHC. [...]
2015 - 5 p. - Published in : 10.18429/JACoW-SRF2015-TUPB027 Fulltext: PDF;
In : 17th International Conference on RF Superconductivity, Whistler, Canada, 13 - 18 Sep 2015, pp.TUPB027
2.
Evaluation of Young’s modulus of MgB2 filaments in composite wires for the superconducting links for the high-luminosity LHC upgrade / Sugano, Michinaka ; Ballarino, Amalia ; Bartova, Barbora ; Bjoerstad, Roger ; Gerardin, Alexandre ; Scheuerlein, Christian (CERN)
MgB2 wire is a promising superconductor for the superconducting links for the high-luminosity upgrade of the large Hadron collider at CERN. The mechanical properties of MgB2 must be fully quantified for the cable design, and in this study, we evaluate the Young's modulus of MgB2 filaments in wires with a practical level of critical current. [...]
2015 - Published in : Supercond. Sci. Technol. 29 (2015) 025009
3.
Characterization of Nb Coating in HIE-ISOLDE QWR Superconducting Accelerating Cavities by means of SEM-FIB and TEM / Bártová, Barbora (CERN) ; Aebersold, Arthur (Ecole Polytechnique, Lausanne) ; Alexander, Duncan (Ecole Polytechnique, Lausanne) ; Calatroni, Sergio (CERN) ; Cantoni, Marco (Ecole Polytechnique, Lausanne) ; Sublet, Alban (CERN) ; Taborelli, Mauro (CERN)
The Quarter Wave Resonators (QWR) high-β cavities (0.3m diameter and 0.9m height) are made from OFE 3D-forged copper and are coated by DC-bias diode sputtering with a thin superconducting layer of niobium. The Nb film thickness, morphology, purity and quality are critical parameters for RF performances of the cavity. [...]
CERN-ACC-2015-228.- 2015 - 4 p. - Published in : (2015) , pp. WEPHA022 Published version from JACoW: PDF; External link: JACOW
In : 6th International Particle Accelerator Conference, Richmond, VA, USA, 3 - 8 May 2015, pp.WEPHA022
4.
Development and Production of Non-evaporable Getter Coatings for MAX IV / Costa Pinto, Pedro (CERN) ; Ahlbäck, Jonny (Lund U., MAX-lab) ; Al-Dmour, Eshraq (Lund U., MAX-lab) ; Bártová, Barbora (CERN) ; Grabski, Marek (Lund U., MAX-lab) ; Holliger, Benjamin (CERN) ; Marques Dos Santos, Sergio (CERN) ; Nistor, Valentin (CERN) ; Pasquino, Chiara (Lund U., MAX-lab) ; Sapountzis, Antonios (CERN) et al.
MAX IV is presently under construction at Lund, Sweden, and the first beam for the production of synchrotron radiation is expected to circulate in 2016. The whole set of 3-GeV ring beam pipes is coated with Ti-Zr-V Non Evaporable Getter (NEG) thin film in order to fulfil the average pressure requirement of 1x10⁻⁹ mbar, despite the compact magnet layout and the large aspect ratio of the vacuum chambers. [...]
CERN-ACC-2015-231.- 2015 - 3 p. - Published in : (2015) , pp. WEPHA019 Published version from JACoW: PDF; External link: JACOW
In : 6th International Particle Accelerator Conference, Richmond, VA, USA, 3 - 8 May 2015, pp.WEPHA019
5.
Characterization of Nb coating in HIE-ISOLDE QWR superconducting accelerating cavities by means of SEM-FIB and TEM / Bartova, Barbora (CERN) ; Sublet, Alban Rene Maurice (CERN) ; Taborelli, M (CERN) ; Aebersold, A B (EPFL) ; Alexander, D T L (EPFL) ; Cantoni, M (CIME) ; Calatroni, Sergio (CERN)
The Quarter Wave Resonators (QWR) high-β cavities (0.3 m diameter and 0.9 m height) are made from OFE 3D-forged copper and are coated by DC-bias diode sputtering with a thin superconducting layer of niobium [...]
CERN-ACC-Note-2015-0012.
- 2015. - 7 p.
Full text
6.
Nb Coated HIE-ISOLDE QWR Superconducting Accelerating Cavities: From Process Development to Series Production / Sublet, Alban (CERN) ; Aviles Santillana, Ignacio (CERN) ; Bartova, Barbora (CERN) ; Calatroni, Sergio (CERN) ; Jecklin, Noemie (CERN) ; Mondino, Irene (CERN) ; Therasse, Mathieu (CERN) ; Venturini Delsolaro, Walter (CERN) ; Zhang, Pei (CERN) ; Cantoni, Marco (Ecole Polytechnique, Lausanne)
The new HIE-ISOLDE accelerator at CERN requires the production of 32 superconducting cavities (20 high- β and 12 low- β ) in order to increase the energy of the rare isotope beam delivered to the experiments. The Quarter Wave Resonators (QWR) cavities (0.3m diameter and 0.9m height for the high- β ) are made of OFE 3D-forged copper and are coated by DC-bias diode sputtering with a thin superconducting layer of niobium. [...]
2014 - 3 p. - Published in : , pp. WEPRI042 Fulltext: PDF; External link: Published version from JACoW
In : 5th International Particle Accelerator Conference, Dresden, Germany, 15 - 20 Jun 2014, pp.WEPRI042

参见:相似的作者
1 Bartova, B
6 Bártová, Barbora
您想得到有关这检索条件的最新结果吗?
建立您的 电邮警报 或订阅 RSS feed.
没有寻找到什么? 尝试在以下的服务器查寻:
Bartova, Barbora 在 Amazon
Bartova, Barbora 在 CERN EDMS
Bartova, Barbora 在 CERN Intranet
Bartova, Barbora 在 CiteSeer
Bartova, Barbora 在 Google Books
Bartova, Barbora 在 Google Scholar
Bartova, Barbora 在 Google Web
Bartova, Barbora 在 IEC
Bartova, Barbora 在 IHS
Bartova, Barbora 在 INSPIRE
Bartova, Barbora 在 ISO
Bartova, Barbora 在 KISS Books/Journals
Bartova, Barbora 在 KISS Preprints
Bartova, Barbora 在 NEBIS
Bartova, Barbora 在 SLAC Library Catalog
Bartova, Barbora 在 Scirus