|
1.
|
AUP First Pre-Series Cryo-Assembly Design Production and Test Overview
/ Feher, S (Fermilab) ; Ambrosio, G (Fermilab) ; Apollinari, G (Fermilab) ; Baldini, M (Fermilab) ; Bossert, R (Fermilab) ; Carcagno, R (Fermilab) ; Chlachidze, G (Fermilab) ; DiMarco, J (Fermilab) ; Rabehl, R (Fermilab) ; Stoynev, S (Fermilab) et al.
New high field and large-aperture quadrupole magnets for the low-beta inner triplets (Q1, Q2, Q3) have been built and tested as part of the high-luminosity upgrade of the Large Hadron Collider (HL-LHC). These new quadrupole magnets are based on Nb3Sn superconducting technology. [...]
FERMILAB-CONF-23-0891-TD.-
2024 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4005605
Fermilab Library Server: PDF; External link: Fermilab Library Server
|
|
|
2.
|
|
|
3.
|
Status and challenges of the interaction region magnets for HL-LHC
/ Todesco, E (CERN) ; Izquierdo Bermudez, S (CERN) ; Foussat, A (CERN) ; Gautheron, E (CERN) ; Kirby, G (CERN) ; Felice, H (CERN) ; Perez, J C (CERN) ; Fleiter, J (CERN) ; Barth, C (CERN) ; Milanese, A (CERN) et al.
About one hundred magnets of six different types shall be installed in the High Luminosity LHC (HL-LHC) in the years 2026-2028 at CERN. The magnets design, construction and test are based on CERN collaborations with institutes and industrial partners in USA, Spain, Italy, Japan and China. [...]
FERMILAB-PUB-22-861-TD.-
2023 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4001608
Fulltext: PDF; External link: Fermilab Accepted Manuscript
|
|
|
4.
|
MQXFA Final Design Report
/ Ambrosio, Giorgio
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS) [...]
arXiv:2203.06723 ; FERMILAB-TM-2773-TD ; US-HiLumi-doc-948
-
120.
|
|
|
5.
|
Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC
/ Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (Brookhaven) ; Anerella, Michael (Brookhaven) ; Apollinari, Giorgio (Fermilab) ; Izquierdo, Gonzalo Arnau (CERN) ; Baldini, Maria (Fermilab) ; Ballarino, Amalia (CERN) ; Barth, Christian (CERN) ; Yahia, Anis Ben (Brookhaven) ; Blowers, James (Fermilab) et al.
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. [...]
arXiv:2301.09523; FERMILAB-PUB-22-855-TD.-
2023-08 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4003508
Fulltext: 2301.09523 - PDF; 81b192c337ae5d5acaec37450e135529 - PDF; External link: Fermilab Library Server
|
|
|
6.
|
Development and test of single-bore $Cos \vartheta$ Nb$_3$Sn dipole models with cold iron yoke
/ Andreev, N (Fermilab) ; Ambrosio, G (Fermilab) ; Barzi, E (Fermilab) ; Carcagno, R (Fermilab) ; Chichili, D R (Fermilab) ; DiMarco, J (Fermilab) ; Feher, S (Fermilab) ; Imbasciati, L (Fermilab) ; Kashikhin, V V (Fermilab) ; Lamm, M (Fermilab) et al.
Two short Nb$_3$Sn dipole models based on a single-bore cos-theta coil with a cold iron yoke were fabricated and tested at Fermilab. This paper summarizes the details of magnet design and fabrication procedure, and reports the test results including quench performance and quench heater studies, and the magnetic measurements..
FERMILAB-CONF-01-380.-
2002 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 12 (2002) 332-336
Fulltext: PDF;
In : 17th International Conference on Magnet Technology, CERN, Geneva, Switzerland, 24 - 28 Sep 2001, pp.332-336
|
|
|
7.
|
Development and test of Nb$_3$Sn cos-theta dipoles based on PIT strands
/ Zlobin, A V (Fermilab) ; Ambrosio, G (Fermilab) ; Andreev, N (Fermilab) ; Barzi, E (Fermilab) ; Bossert, R (Fermilab) ; Carcagno, R (Fermilab) ; Chichili, D R (Fermilab) ; Elementi, L (Fermilab) ; Feher, S (Fermilab) ; Kashikhin, V V (Fermilab) et al.
Fermilab is involved in the development of new generation high-field accelerator magnets using state-of-the-art Nb$_3$Sn strands produced using different technologies. Two 1-m long models-mirror configuration and dipole magnet-were fabricated recently at Fermilab based on powder-in-tube (PIT) Nb$_3$Sn strands with small effective filament size. [...]
FERMILAB-CONF-04-274-TD.-
2005 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 15 (2005) 1160-1163
Fulltext: PDF; External link: Fermilab Library Server (fulltext available)
In : Applied Superconductivity Conference: Harnessing the Magic, Jacksonville, FL, USA, 3 - 8 Oct 2004, pp.1160-1163
|
|
|
8.
|
Test results of shell-type Nb$_3$Sn dipole coils
/ Feher, S (Fermilab) ; Ambrosio, G (Fermilab) ; Andreev, N (Fermilab) ; Barzi, E (Fermilab) ; Carcagno, R (Fermilab) ; Chichili, D R (Fermilab) ; Kashikhin, V (Fermilab) ; Kashikhin, V V (Fermilab) ; Lamm, M J (Fermilab) ; Orris, D (Fermilab) et al.
Several different shell type coils were made by using the 'wind-and-react' technique, installed in a mirror magnet configuration and tested at Fermilab. The results revealed that the previously suspect splice technique is adequate and is not responsible for the quench performance limitation. [...]
FERMILAB-FN-0864-TD.-
2004 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 14 (2004) 349-352
In : 18th International Conference on Magnet Technology, Morioka, Japan, 20 - 24 Oct 2003, pp.349-352
|
|
|
9.
|
Assembly and Test of SQ01b, a Nb$_3$Sn Quadrupole Magnet for the LHC Accelerator Research Program
/ Ferracin, P (LBL, Berkeley) ; Ambrosio, G (Fermilab) ; Bartlett, S E (LBL, Berkeley) ; Bordini, B (Fermilab) ; Carcagno, R H (Fermilab) ; Caspi, S (LBL, Berkeley) ; Dietderich, D R (LBL, Berkeley) ; Feher, S (Fermilab) ; Gourlay, S A (LBL, Berkeley) ; Hafalia, A R (LBL, Berkeley) et al.
The US LHC Accelerator Research Program (LARP) consists of four US laboratories (BNL, FNAL, LBNL, and SLAC) collaborating with CERN to achieve a successful commissioning of the LHC and to develop the next generation of Interaction Region magnets. In 2004, a large aperture Nb$_3$Sn racetrack quadrupole magnet (SQ01) has been fabricated and tested at LBNL [...]
2006 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 16 (2006) 382-385
In : 19th International Conference on Magnet Technology, Genoa, Italy, 18 - 23 Sep 2005, pp.382-385
|
|
|
10.
|
Development and test of LARP technological quadrupole (TQC) magnet
/ Feher, S (Fermilab) ; Bossert, R C (Fermilab) ; Ambrosio, G (Fermilab) ; Andreev, N (Fermilab) ; Barzi, E (Fermilab) ; Carcagno, R (Fermilab) ; Kashikhin, V S (Fermilab) ; Kashikhin, V V (Fermilab) ; Lamm, M J (Fermilab) ; Nobrega, F (Fermilab) et al.
In support of the development of a large-aperture superconducting quadrupole for the Large Hadron Collider (LHC) luminosity upgrade, two-layer quadrupole models (TQC and TQS) with 90 mm aperture are being constructed at Fermilab and LBNL within the framework of the US LHC Accelerator Research Program (LARP). This paper describes the construction and test of model TQC01. [...]
FERMILAB-PUB-06-296-TD.-
2007 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 17 (2007) 1126-1129
Fulltext: PDF; External link: Fermilab Library Server (fulltext available)
In : Applied Superconductivity Conference, Seattle, WA, USA, 27 Aug - 1 Sep 2006, pp.1126-1129
|
|
email alert alebo použite 
RSS feed.