CERN Accelerating science

Hovedsiden > Søkeresultater: Pfeiffer, Stephan
Søketips
Avansert søk
Add to Search +
Søk samlinger:
Sorter etter: Vis resultater: Visningsformat:
CERN Document Server 9 elementer funnet  Søket tok 0.57 sekunder. 
1.
Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners / Veness, Raymond (CERN) ; Guerrero, Ana (CERN) ; Perez Fontenla, Ana Teresa (CERN) ; Harrison, Anthony (CERN) ; Salvant, Benoit (CERN) ; Zannini, Carlo (CERN) ; Antuono, Chiara (CERN) ; Vollinger, Christine (CERN) ; de la Fuente, Elena (CERN) ; Carra, Federico (CERN) et al.
A new design of fast wire scanner was installed in the CERN injector complex as part of the upgrades linked to the High-Luminosity LHC Project. Initial operations with these beams were good, but during the planned intensity ramp-up one early 2023, all four SPS scanners failed at the same time. [...]
2024 - 4 p. - Published in : JACoW IPAC 2024 (2024) WEPG26 Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.WEPG26
Detaljert visning - Lignende elementer
2.
Planar deposition of Nb thin films by HiPIMS for superconducting radiofrequency applications / Carlos, Carlota P A (CERN ; U. Geneva (main)) ; Leith, Stewart (CERN) ; Rosaz, Guillaume (CERN) ; Pfeiffer, Stephan (CERN) ; Senatore, Carmine (U. Geneva (main))
Cost efficiency and sustainability are critical challenges for future accelerator machines. Nb-coated Cu (Nb/Cu) superconducting radiofrequency (SRF) accelerating cavities, while requiring R&D; to meet high acceleration gradient performance standards, show potential for addressing these challenges. [...]
2024 - 12 p. - Published in : Vacuum 227 (2024) 113354 Fulltext: PDF;
Detaljert visning - Lignende elementer
3.
Optimizing the Manufacture of High-Purity Niobium SRF Cavities Using the Forming Limit Diagram: A Case Study of the HL-LHC Crab Cavities RFD Pole / Gallifa Terricabras, Adrià (CERN) ; Aviles Santillana, Ignacio (CERN) ; Barrière, Simon (CERN) ; Cano-Pleite, Eduardo (Carlos III U., Madrid) ; Garlasché, Marco (CERN) ; Narduzzi, Manuele (Fermilab) ; Pfeiffer, Stephan (CERN) ; Prever-Loiri, Laurent (CERN) ; Swieszek, Joanna (CERN ; U. Heidelberg (main))
The Crab Cavities are key components of the High Luminosity Large Hadron Collider (HL-LHC) project at CERN, which aims to increase the integrated luminosity of the LHC, the world’s largest particle accelerator, by a factor of ten. This paper explores the application of the Forming Limit Diagram (FLD) to enhance the manufacturing process of complex-shape Nb-based cavities, with a focus on the formability challenges experienced with the pole of the Radio Frequency Dipole (RFD) Crab Cavities. [...]
FERMILAB-CONF-23-769.- 2023 - 7 p. - Published in : JACoW SRF 2023 (2023) 627-633 Fulltext: PDF;
In : 21st International Conference on Radio-Frequency Superconductivity (SRF 2023), Grand Rapids, MI, United States, 22 - 30 Jun 2023, pp.627-633
Detaljert visning - Lignende elementer
4.
Development and characterisation of advanced coatings for high energy physics applications / Perez Fontenla, Ana Teresa (CERN) ; Pereira Carlos, Carlota (CERN) ; Leith, Stewart (CERN) ; Moros, Alice (CERN) ; Pfeiffer, Stephan (CERN) ; Rodriguez-Castro, Enrique (CERN) ; Rosaz, Guillaume (CERN)
The Future Circular Collider (FCC) study develops the technologies for next generation high performance particle colliders and accelerating structures. It places high requirements on the performance of Superconducting Radio Frequency (SRF) cavities used to accelerate the particle beam. [...]
2023 - 4 p. - Published in : JACoW IPAC 2023 (2023) WEPA150 Fulltext: PDF;
In : 14th International Particle Accelerator Conference (IPAC 2023), Venice, Italy, 7 - 12 May 2023, pp.WEPA150
Detaljert visning - Lignende elementer
5.
Towards Ultra-Thin Detector Magnet Designs by Insulating Coil Windings With V$_2$0$_3$-Epoxy Composite / Vaskuri, Anna (CERN) ; Curé, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN) ; Pfeiffer, Stephan (CERN) ; Teissandier, Benoit (CERN)
We have measured temperature dependent resistivity of two types of vanadium oxide (V 2 O 3 ) epoxy composites from 77 K to room temperature. Such a composite could be used as an insulating layer between the windings of a superconducting magnet. [...]
2023 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 33 (2023) 1-4
Detaljert visning - Lignende elementer
6.
Picosecond pulsed 532 nm laser system for roughening and secondary electron yield reduction of inner surfaces of up to 15 m long tubes / Bez, Elena (CERN ; Leipzig U.) ; Himmerlich, Marcel (CERN) ; Beaudou, Benoit (XLIM, Limoges) ; Portilla, Ana Karen Reascos (CERN) ; Wackerow, Stefan (U. Dundee) ; Rimoldi, Martino (CERN) ; Pfeiffer, Stephan (CERN) ; Wiesendanger, Markus (Zurich U.) ; Benabid, Fetah (XLIM, Limoges) ; Taborelli, Mauro (CERN) et al.
Laser-induced surface structuring is a promising method to suppress electron mulitpacting in the vacuum pipes of particle accelerators. Electrons are scattered inside the rough surface structure, resulting in a low Secondary Electron Yield (SEY) of the material. [...]
2023 - 11 p. - Published in : Rev. Sci. Instrum. 94 (2023) 103007 Fulltext: PDF;
Detaljert visning - Lignende elementer
7.
Dielectric resonator to measure surface resistance of accelerator components at room temperature and 77 K / Brunner, Kristóf (CERN) ; Krkotić, Patrick (CERN) ; Pinto, Pedro Costa (CERN) ; Diaz-Rato, Eduardo Gibbons (CERN) ; Pfeiffer, Stephan (CERN) ; Vollenberg, Wilhelmus (CERN) ; Calatroni, Sergio (CERN) ; Barna, Dániel (Wigner RCP, Budapest) ; Pont, Montse (CELLS - ALBA, LLS) ; O'Callaghan, Joan (Barcelona, Polytechnic U.)
We measured the surface resistance of titanium, amorphous carbon, and nonevaporable getter (NEG) coatings on copper samples, representative of surface treatments of beam-facing components in the High-Luminosity Large Hadron Collider at CERN. Measurements were done at room temperature as well as at liquid nitrogen temperature (77 K) by means of a novel large dielectric resonator operating at 3.4 GHz. [...]
2023 - 8 p. - Published in : Phys. Rev. Accel. Beams 26 (2023) 083101 Fulltext: PDF;
Detaljert visning - Lignende elementer
8.
Influence of wavelength and accumulated fluence at picosecond laser-induced surface roughening of copper on secondary electron yield / Bez, Elena (CERN ; Leipzig U.) ; Himmerlich, Marcel (CERN) ; Lorenz, Pierre ; Ehrhardt, Martin ; Gunn, Aidan Graham (CERN) ; Pfeiffer, Stephan (CERN) ; Rimoldi, Martino (CERN) ; Taborelli, Mauro (CERN) ; Zimmer, Klaus ; Chiggiato, Paolo (CERN) et al.
Ultrashort-pulse laser processing of copper is performed in air to reduce the secondary electron yield (SEY). By UV (355 nm), green (532 nm), and IR (1064 nm) laser-light induced surface modification, this study investigates the influence of the most relevant experimental parameters, such as laser power, scanning speed, and scanning line distance (represented as accumulated fluence) on the ablation depth, surface oxidation, topography, and ultimately on the SEY. [...]
2023 - 10 p. - Published in : J. Appl. Phys. 133 (2023) 035303 Fulltext: PDF;
Detaljert visning - Lignende elementer
9.
The CERN FCC Conductor Development Program: A Worldwide Effort for the Future Generation of High Field Magnets / Ballarino, Amalia (CERN) ; Hopkins, Simon (CERN) ; Bordini, Bernardo (CERN) ; Richter, David (CERN) ; Tommasini, Davide (CERN) ; Bottura, Luca (CERN) ; Benedikt, Michael (CERN) ; Sugano, Michinaka ; Ogitsu, Toru ; Kawashima, Shinya (Kobe Steel) et al.
The study of next-generation high-energy accelerators based on 16 T dipoles has emphasized the need for higher performance, cost-effective Nb$_3$Sn superconducting wires. A Conductor Development Program aiming to reach a non-copper critical current density ($J_c$) of 1500 A/mm2 at 16 T and 4.2 K has been launched by CERN, with the involvement of industry and laboratories worldwide. [...]
CERN-ACC-2019-0001.- Geneva : CERN, 2019 - 9 p. - Published in : IEEE Trans. Appl. Supercond. 29 (2019) 6000709 Fulltext: PDF;
In : Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.6000709
Detaljert visning - Lignende elementer

Se også: lignende forfatternavn
10 Pfeiffer, S
1 Pfeiffer, S.
2 Pfeiffer, Silvia
1 Pfeiffer, Sven
Ønsker du å bli varslet om nye resultater fra denne spørringen?
Sett opp ditt eget e-postvarsel eller abonner på RSS.
Fant du ikke det du lette etter? Gjenta søket på andre tjenere:
Pfeiffer, Stephan i Amazon
Pfeiffer, Stephan i CERN EDMS
Pfeiffer, Stephan i CERN Intranet
Pfeiffer, Stephan i CiteSeer
Pfeiffer, Stephan i Google Books
Pfeiffer, Stephan i Google Scholar
Pfeiffer, Stephan i Google Web
Pfeiffer, Stephan i IEC		Pfeiffer, Stephan i IHS
Pfeiffer, Stephan i INSPIRE
Pfeiffer, Stephan i ISO
Pfeiffer, Stephan i KISS Books/Journals
Pfeiffer, Stephan i KISS Preprints
Pfeiffer, Stephan i NEBIS
Pfeiffer, Stephan i SLAC Library Catalog
Pfeiffer, Stephan i Scirus