|
1.
|
Dielectric, thermal and mechanical properties of insulation systems for quench heaters for the protection of superconducting magnets
/ Scheuerlein, Christian (CERN) ; Osuna, Javier (CERN) ; Vielhauer, Julia (CERN) ; De Oliveira, Rui (CERN) ; Koettig, Torsten (CERN) ; Piccin, Roland (CERN)
High dielectric strength, low thermal resistance and mechanical robustness are conflicting requirements on the insulation system between the superconductors in magnet coils and the quench heaters placed on the coil for active protection in case of a quench. To investigate possibilities to further improve the performance of quench heaters for future superconducting magnets, we have characterised polyimide, PEEK and fibre reinforced PEEK films that can be used to produce large flexibly quench heater circuits. [...]
2025 - 6 p.
- Published in : IOP Conf. Ser. Mater. Sci. Eng.: 1327 (2025) , no. 1, pp. 012202
Fulltext: PDF;
In : 29th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2024, Geneva, Switzerland, 22 - 26 July 2024, pp.012202
|
|
|
2.
|
Advanced Composite Insulation Systems in Nb$_{3}$Sn Superconducting Magnets for Accelerators: Electrical Characterization of Laminates at Cryogenic Temperatures
/ Osuna, J (CERN) ; Piccin, R (CERN) ; Pincot, F O (CERN) ; Polvani, D (CERN ; Bologna U.) ; Scheuerlein, C (CERN)
The electrical insulation system in wind-and-react Nb3Sn superconducting magnets must be robust, such that it can sustain the mechanical stresses, high radiation doses, and thermal cycles involved in the operation of the magnets. The chosen cable insulation material, currently a thin layer of braided S2 Glass, must also withstand a high-temperature heat treatment in an inert atmosphere, required to develop the superconducting phase in the cable. [...]
2025 - 6 p.
- Published in : IOP Conf. Ser. Mater. Sci. Eng.: 1327 (2025) , no. 1, pp. 012210
Fulltext: PDF;
In : 29th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2024, Geneva, Switzerland, 22 - 26 July 2024, pp.012210
|
|
|
3.
|
Thermomechanical properties of epoxy and wax matrix composites for superconducting magnets
/ Bertsch, Jacob (CERN) ; Scheuerlein, Christian (CERN) ; Wiker, Petter (CERN ; Norwegian U. Sci. Tech.) ; Parragh, David (CERN) ; Echtermeyer, Andreas (Norwegian U. Sci. Tech.) ; Piccin, Roland (CERN)
Thermomechanical properties of epoxy resin systems and paraffin wax for the vacuum impregnation of superconducting magnet coils have been studied at ambient and at cryogenic temperatures. Parameters for the thermomechanical modelling of isotropic pure resins and anisotropic S2 glass fibre reinforced composites, and their stress limits under uniaxial tensile, bending and shear loading have been determined..
2025 - 6 p.
- Published in : IOP Conf. Ser. Mater. Sci. Eng.: 1327 (2025) , no. 1, pp. 012204
Fulltext: PDF;
In : 29th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2024, Geneva, Switzerland, 22 - 26 July 2024, pp.012204
|
|
|
4.
|
Thermomechanical properties and irradiation induced aging of SLA and FDM 3D printed high performance polymers
/ Scheuerlein, Christian (CERN) ; Parragh, David Mate (CERN) ; Vielhauer, Julia (CERN) ; Gaarud, Anders (CERN) ; Martin, Noemie (CERN) ; Piccin, Roland (CERN)
The thermomechanical properties of 3D printed polymers for potential use in superconducting devices have been compared. The FDM printed thermoplastics PEEK and ULTEM 9085 exhibit strongly anisotropic properties, with very high mechanical strength and fracture toughness in the flat and on edge printing directions, but much lower strength and toughness in the upright position. [...]
2025 - 6 p.
- Published in : IOP Conf. Ser. Mater. Sci. Eng.: 1327 (2025) , no. 1, pp. 012209
Fulltext: PDF;
In : 29th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2024, Geneva, Switzerland, 22 - 26 July 2024, pp.012209
|
|
|
5.
|
Futur collisionneur circulaire—Rapport d’étude de faisabilité, volume 3 : Génie civil, implantation et durabilité
/ Benedikt, M. (CERN) ; Zimmermann, F. (CERN) ; Auchmann, B. (CERN ; PSI, Villigen) ; Bartmann, W. (CERN) ; Burnet, J.P. (CERN) ; Carli, C. (CERN) ; Chancé, A. (IRFU, Saclay) ; Craievich, P. (PSI, Villigen) ; Giovannozzi, M. (CERN) ; Grojean, C. (DESY ; Humboldt U., Berlin) et al.
CERN-FCC-ACC-2025-0003-FR.-
Geneva : CERN, 2025-03 - 357 p.
- Published in : 10.17181/CERN.WE26.NJC0
|
|
|
6.
|
|
|
High Field Magnet Programme -- European Strategy Input
/ Alfonso, L. (INFN, Parma) ; Ambrosio, G. (Fermilab) ; Araujo, D. (PSI, Villigen) ; Arpaia, P. (INFN, Parma) ; Auchmann, B. (PSI, Villigen ; CERN) ; Axensalva, J. (CERN) ; Balconi, L. (INFN, Milan ; Milan U. ; INFN, Parma) ; Ballarino, A. (CERN) ; Barzi, E. (Ohio State U. ; Unlisted) ; Baskys, A. (CERN) et al.
In this submission, we describe research goals, implementation, and timelines of the High Field Magnet Programme, hosted by CERN. [...]
arXiv:2504.16885 ; FERMILAB-PUB-25-0283-TD.
-
15.
Fermilab Library Server - Fulltext - Fulltext
|
|
|
7.
|
Future Circular Collider Feasibility Study Report Volume 2 : Accelerators, technical infrastructure and safety
/ Benedikt, M. (ed.) (CERN) ; Zimmermann, F. (CERN) ; Auchmann, B. (CERN ; PSI, Villigen) ; Bartmann, W. (CERN) ; Burnet, J.P. (CERN) ; Carli, C. (CERN) ; Chancé, A. (IRFU, Saclay) ; Craievich, P. (PSI, Villigen) ; Giovannozzi, M. (CERN) ; Grojean, C. (DESY ; Humboldt U., Berlin) et al.
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. The FCC ‘integrated programme’, described in this report, in a first stage consists of a highest-luminosity electron-positron collider, FCC-ee, serving as Higgs, top and electroweak factory, with a subsequent energy-frontier proton-proton collider, FCC-hh, as the second stage. The FCC-ee is designed to operate at four baseline centre-of-mass energies, corresponding to the Z pole, the WW pair production threshold, the ZH production peak, and the top/anti-top production threshold, always delivering the highest possible luminosities to four experiments. [...]
arXiv:2505.00274; CERN-FCC-ACC-2025-0004.-
Geneva : CERN, 2025 - 627 p.
Fulltext: CERN-FCC-ACC-2025-0004 - PDF; 2505.00274 - PDF;
|
|
|
8.
|
Future Circular Collider Feasibility Study Report Volume 3 : Civil Engineering, Implementation and Sustainability
/ Benedikt, M. (CERN) ; Zimmermann, F. (CERN) ; Auchmann, B. (CERN ; PSI, Villigen) ; Bartmann, W. (CERN) ; Burnet, J.P. (CERN) ; Carli, C. (CERN) ; Chancé, A. (IRFU, Saclay) ; Craievich, P. (PSI, Villigen) ; Giovannozzi, M. (CERN) ; Grojean, C. (DESY ; Humboldt U., Berlin) et al.
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. [...]
arXiv:2505.00273; CERN-FCC-ACC-2025-0003.-
Geneva : CERN, 2025-03 - 357 p.
- Published in : 10.17181/CERN.I26X.V4VF
Fulltext: CERN-FCC-ACC-2025-0003 - PDF; 2505.00273 - PDF;
|
|
|
9.
|
Future Circular Collider Feasibility Study Report Volume 1 : Physics and Experiments
/ Benedikt, M. (CERN) ; Zimmermann, F. (CERN) ; Auchmann, B. (CERN ; PSI, Villigen) ; Bartmann, W. (CERN) ; Burnet, J.P. (CERN) ; Carli, C. (CERN) ; Chancé, A. (IRFU, Saclay) ; Craievich, P. (PSI, Villigen) ; Giovannozzi, M. (CERN) ; Grojean, C. (DESY ; Humboldt U., Berlin) et al.
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how the FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. [...]
arXiv:2505.00272; CERN-FCC-PHYS-2025-0002.-
Geneva : CERN, 2025 - 290 p.
- Published in : 10.17181/CERN.9DKX.TDH9
Fulltext: CERN-FCC-PHYS-2025-0002 - PDF; 2505.00272 - PDF;
|
|
|
10.
|
e-book
|
ელფოსტის შეტყობინება
ან ჩაეწერეთ 
RSS ფიდზე.