|
1.
|
Fabrication and Test of the Fourth Prototype of the D2 Orbit Corrector Dipole for HL-LHC
/ Ilardi, Veronica (CERN) ; Felice, Hélène (CERN ; IRFU, Saclay, DACM) ; Feuvrier, Jerome (CERN) ; Fiscarelli, Lucio (CERN) ; Foussat, Arnaud P (CERN) ; Kirby, Glyn (CERN) ; Kosowski, Filip (CERN) ; Mangiarotti, Franco J (CERN) ; Pincot, Francois-Olivier (CERN) ; Rogacki, Piotr T (CERN) et al.
As part of the High-Luminosity upgrade project (HL-LHC) for the Large Hadron Collider (LHC) at CERN, new double-aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These magnets are 2.2 m long Nb–Ti dipoles based on the Canted Cosine-Theta (CCT) design. [...]
2024 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4002006
|
|
|
2.
|
Test Results From CD1 Short CCT Nb-Sn Dipole Demonstrator and Considerations About CCT Technology for the FCC-Hh Main Dipole
/ Auchmann, B (PSI, Villigen ; CERN) ; Araujo, D M (PSI, Villigen) ; Brem, A (PSI, Villigen) ; Daly, M (PSI, Villigen) ; Felder, R (PSI, Villigen) ; Feuvrier, J (CERN) ; Hug, C (PSI, Villigen) ; Kirby, O (PSI, Villigen) ; Mangiarotti, F (CERN) ; Milanese, A (CERN) et al.
In this article, we attempt to summarize the 5-year long involvement of PSI through the CHART MagDev program with R&D; on the Canted Cosine Theta (CCT) technology as a candidate for an FCC-hh main dipole magnet. We present the test results of the Canted Dipole 1 (CD1) 1-m-long 10-T Nb$_{3}$Sn demonstrator magnet, as well as a subjective list of ‘pros and cons' of CCT for the FCC-hh that we compiled along the way. [...]
2024 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4000906
|
|
|
3.
|
Powering Performance and Endurance Beyond Design Limits of HL-LHC Low-Beta Quadrupole Model Magnets
/ Mangiarotti, Franco J (CERN) ; Ferradas Troitino, Salvador (CERN) ; Duda, Michal (Cracow, INP) ; Bajko, Marta (CERN) ; Bottura, Luca (CERN) ; Desbiolles, Vincent (CERN) ; Elekes, Gyopar (Babes-Bolyai U.) ; Ferradas Troitino, Jose (METROLAB, Geneva ; CERN) ; Feuvrier, Jerome (CERN) ; Ferracin, Paolo (LBNL, Berkeley) et al.
For the High Luminosity Upgrade project (HL-LHC) of the CERN Large Hadron Collider (LHC), lower β* quadrupole magnets based on advanced Nb 3 Sn conductors will be installed on each side of the ATLAS and CMS interaction points. To quantify the endurance and technological limits of these magnets, beyond their maximum operational conditions, two short length model magnets have been extensively tested at the CERN SM18 test facility. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4000805
|
|
|
4.
|
Test of the First Full-Length Prototype of the HL-LHC D2 Orbit Corrector Based on Canted Cosine Theta Technology
/ Mangiarotti, Franco J (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Fiscarelli, Lucio (CERN) ; Kirby, Glyn (CERN) ; Bajko, Marta (CERN) ; Coll, Dominic (Unlisted, GB) ; Desbiolles, Vincent ; Feuvrier, Jerome (CERN) ; Guyon, Jean-Luc (CERN) ; Mazet, Jacky (CERN) et al.
In the context of CERN's high-luminosity upgrade project (HL-LHC) for the Large Hadron Collider (LHC), a new double aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These 2.2 m long NbTi dipoles are built with the canted cosine theta (CCT) technique. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4000505
|
|
|
5.
|
An MgB- Superconducting Shield Prototype for the Future Circular Collider Septum Magnet
/ Barna, Daniel (Wigner RCP, Budapest ; CERN) ; Giunchi, Giovanni (Edison SpA, Milan) ; Novák, Martin (Wigner RCP, Budapest) ; Brunner, Kristof (Wigner RCP, Budapest) ; Német, Aniko (Wigner RCP, Budapest) ; Petrone, Carlo (CERN) ; Atanasov, Miroslav (CERN) ; Bajas, Hugues (CERN) ; Feuvrier, Jerome (CERN)
A passive superconducting shield was previously proposed to realize a high-field (above 3 T) septum magnet for the Future Circular Collider proton–proton ring (FCC-hh). This paper presents the experimental results of a potential shield material, MgB$_2$, at a temperature of 4.2 K. [...]
2019 - 10 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4101310
|
|
|
6.
|
Power test of the second-generation Compact Linear Collider (CLIC) Nb$_3$Sn damping wiggler short model
/ Duda, Michal (Cracow, INP ; CERN) ; Mangiarotti, Franco (CERN) ; Bajko, Marta (CERN) ; Bernhard, Axel (KIT, Karlsruhe) ; Desbiolles, Vincent (CERN) ; Ferracin, Paolo (CERN) ; Feuvrier, Jerome (CERN) ; Garcia Fajardo, Laura (LBL, Berkeley) ; Lorenzo, Jose (CERN) ; Mazet, Jacky (CERN) et al.
In the frame of the compact linear collider project, a high-field short-period superconducting damping wigglers will be required to reduce the emittance of the electron and positron beams. The use of Nb$_3$Sn as superconducting material is being investigated, as a valid option for its smaller size and increased working margin. [...]
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4100405
|
|
|
7.
|
Tests of the FRESCA2 100 mm bore Nb$_3$Sn block-coil magnet to a record field of 14.6 T
/ Willering, Gerard (CERN) ; Arnestad, Havard (CERN) ; Bajko, Marta (CERN) ; Bajas, Hugo (CERN) ; Bortot, Lorenzo (CERN) ; Bottura, Luca (CERN) ; Bourcey, Nicolas (CERN) ; Duda, Michal (CERN ; Cracow, INP) ; Ferracin, Paolo (CERN) ; Feuvrier, Jerome (CERN) et al.
The Nb$_3$Sn block coil dipole magnet FRESCA2 was developed within the framework of a collaboration between CEA Saclay and CERN, in the continuity of the European project EuCARD and EuCARD2. With an aperture of 100 mm and a target bore field of 13 T at 10.6 kA, the magnet is required for a new FRESCA2 cable test facility at CERN. [...]
2019 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4004906
|
|
|
8.
|
Test Results of the CERN HL-LHC low-$\beta$ Quadrupole Short Models MQXFS3c and MQXFS4
/ Mangiarotti, Franco J (CERN) ; Bajas, Hugues (CERN) ; Ambrosio, Giorgio (Fermilab) ; Bajko, Marta (CERN) ; Bordini, Bernardo (CERN) ; Bourcey, Nicolas (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Desbiolles, Vincent (CERN) ; Feuvrier, Jerome (CERN) ; Fleiter, Jerome (CERN) et al.
/LARP
For the High Luminosity Upgrade of the CERN Large Hadron Collider, lower $\beta$* quadrupole magnets based on advanced Nb3Sn conductors will be installed on each side of the ATLAS and CMS experiment insertion zones. As part of the technological developments needed to achieve the required field gradient of 132.6 T/m within a 150-mm aperture, short length model magnets, named MQXFS, are tested both at the CERN SM18 and FERMI Lab test facilities. [...]
FERMILAB-PUB-19-055-TD.-
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001705
Fulltext: PDF;
In : Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.4001705
|
|
|
9.
|
Test of short model and prototype of the HL-LHC D2 orbit corrector based on CCT technology
/ Mangiarotti, Franco (CERN) ; Kirby, Glyn (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Mentink, Matthias (CERN) ; Fiscarelli, Lucio (CERN) ; Bajko, Marta (CERN) ; Coll, Dominic (Unlisted, GB) ; Desbiolles, Vincent (CERN) ; Feuvrier, Jerome (CERN) ; Mazet, Jacky (CERN) et al.
In the frame of the high-luminosity upgrade project for the large hadron collider, new twin aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These magnets are 2.2 m long canted cosine theta NbTi dipoles, with two independently powered apertures oriented such that their field vectors are perpendicular to each other and to the direction of the beams. [...]
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4002305
In : Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.4002305
|
|
|
10.
|
Cold Powering Tests and Protection Studies of the FRESCA2 100 mm Bore Nb$_{3}$Sn Block-Coil Magnet
/ Willering, G (CERN) ; Petrone, C (CERN) ; Bajko, M (CERN) ; Bajas, H (CERN) ; Bordini, B (CERN) ; Bottura, L (CERN) ; Bourcey, N (CERN) ; Duda, M (CERN ; Cracow, INP) ; Ferracin, P (CERN) ; Feuvrier, J (CERN) et al.
The Nb3Sn block-coil dipole magnet FRESCA2 was developed within the framework of a collaboration between CEA Saclay and CERN, follow up of the European project EuCARD. The magnet is aimed at upgrading the cable test facility at CERN to a bore field of 13 T at 10.6 kA in an aperture of 100 mm as deliverable. [...]
2018 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4005105
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4005105
|
|
ელფოსტის შეტყობინება
ან ჩაეწერეთ 
RSS ფიდზე.