|
1.
|
The PSI positron production project
/ Vallis, Nicolas (PSI, Villigen ; Ecole Polytechnique, Lausanne) ; Craievich, Paolo (PSI, Villigen) ; Schaer, Mattia (PSI, Villigen) ; Zennaro, Riccardo (PSI, Villigen) ; Auchmann, Bernhard (PSI, Villigen) ; Besana, Maria Ilaria (PSI, Villigen) ; Duda, Michal (PSI, Villigen) ; Fortunati, Reto (PSI, Villigen) ; Garcia Rodrigues, Henrique (PSI, Villigen) ; Hauenstein, Dominique (PSI, Villigen) et al.
The PSI Positron Production experiment, known as $\text{P}^{3}$ or $\textit{P-cubed}$, is a proof-of-principle positron source and capture system that can greatly improve the state-of-the-art positron yield. The $\text{P}^{3}$ project is led by the Paul Scherrer Institute in Switzerland, and addresses the long-standing challenge faced by conventional injector facilities to generate, capture, and damp the emittance of high-current positron beam, which is a major limiting factor for the feasibility of future electron-positron colliders. [...]
2024 - 4 p.
- Published in : JACoW IPAC 2024 (2024) TUPC50
Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.TUPC50
|
|
|
2.
|
Selected advances in the accelerator design of the Future Circular Electron-Positron Collider (FCC-ee)
/ FCC Collaboration
In autumn 2023, the FCC Feasibility Study underwent a crucial “mid-term review”. We describe some accelerator performance risks for the proposed future circular electron-positron collider, FCC-ee, identified for, and during, the mid-term review. [...]
FERMILAB-CONF-24-0659-AD-PIP2.-
2024 - 4 p.
- Published in : JACoW IPAC 2024 (2024) WEPR14
Fulltext: PDF;
In : 15th International Particle Accelerator Conference (IPAC 2024), Nashville, TN, United States, 19 - 24 May 2024, pp.WEPR14
|
|
|
3.
|
Update on the FCC-ee positron source design studies
/ Chaikovska, Iryna (IJCLab, Orsay) ; Bacci, Alberto (INFN, Milan) ; Latina, Andrea (CERN) ; Lechner, Anton (CERN) ; Perillo Marcone, Antonio (CERN) ; Humann, Barbara (CERN) ; Auchmann, Bernhard (PSI, Villigen) ; Alharthi, Fahad (IJCLab, Orsay ; KACST, Riyadh) ; Kosse, Jaap (PSI, Villigen) ; Grenard, Jean-Louis (CERN) et al.
The studies and R&D; on the high-intensity positron source for the FCC-ee have been initiated for a while. The positrons are produced by a 6 GeV electron drive-beam incident on a target-converter at 200 Hz. [...]
2023 - 4 p.
- Published in : JACoW IPAC 2023 (2023) MOPL095
Fulltext: PDF;
In : 14th International Particle Accelerator Conference (IPAC 2023), Venice, Italy, 7 - 12 May 2023, pp.MOPL095
|
|
|
4.
|
|
|
The P$^3$ Experiment: A Positron Source Demonstrator for Future Lepton Colliders
/ Vallis, N. (PSI, Villigen ; Ecole Polytechnique, Lausanne) ; Craievich, P. (PSI, Villigen) ; Schär, M. (PSI, Villigen) ; Zennaro, R. (PSI, Villigen) ; Auchmann, B. (PSI, Villigen ; CERN) ; Braun, H.H. (PSI, Villigen) ; Besana, M.I. (PSI, Villigen) ; Duda, M. (PSI, Villigen) ; Fortunati, R. (PSI, Villigen) ; Garcia-Rodrigues, H. (PSI, Villigen) et al.
The PSI Positron Production (P$^3$ or P-cubed) experiment is a demonstrator for a e+ source and capture system with potential to improve the state-of-the-art e+ yield by an order of magnitude. [...]
arXiv:2308.16803.
-
16 p.
Fulltext
|
|
|
5.
|
High-Power Test of Two Prototype X-Band Accelerating Structures Based on SwissFEL Fabrication Technology
/ Millar, William L (CERN) ; Grudiev, Alexej (CERN) ; Wuensch, Walter (CERN) ; Lasheras, Nuria Catalan (CERN) ; McMonagle, Gerard (CERN) ; Zennaro, Riccardo (PSI, Villigen) ; Craievich, Paolo (PSI, Villigen) ; Bopp, Markus (PSI, Villigen) ; Lucas, Thomas G (PSI, Villigen) ; Volpi, Matteo (CERN ; Melbourne U.) et al.
This article presents the design, construction, and high-power test of two X -band radio frequency (RF) accelerating structures built as part of a collaboration between CERN and the Paul Scherrer Institute (PSI) for the compact linear collider (CLIC) study. The structures are a modified “tuning-free” variant of an existing CERN design and were assembled using Swiss free electron laser (SwissFEL) production methods. [...]
2023 - 19 p.
- Published in : IEEE Trans. Nucl. Sci. 70 (2023) 1-19
Fulltext: PDF;
|
|
|
6.
|
Optimisation of the FCC-ee Positron Source Using a HTS Solenoid Matching Device
/ Zhao, Yongke (CERN) ; Auchmann, Bernhard (PSI, Villigen) ; Chaikovska, Iryna (IJCLab, Orsay) ; Chehab, Robert (IJCLab, Orsay) ; Craievich, Paolo (PSI, Villigen) ; Döbert, Steffen (CERN) ; Duda, Michal (Cracow, INP) ; Kosse, Jaap (PSI, Villigen) ; Latina, Andrea (CERN) ; Martyshkin, Pavel (Novosibirsk, IYF) et al.
In this paper, we present the simulation and optimisation of the FCC-ee positron source, where a high-temperature superconducting (HTS) solenoid is used as the matching device to collect positrons from the target. The "conventional" target scheme is used which simply consists of amorphous tungsten. [...]
2022 - 4 p.
- Published in : JACoW IPAC 2022 (2022) 2003-2006
Fulltext: PDF;
In : 13th International Particle Accelerator Conference (IPAC 2022), Bangkok, Thailand, 12 - 17 Jun 2022, pp.2003-2006
|
|
|
7.
|
The FCCee Pre-Injector Complex
/ Craievich, Paolo (PSI, Villigen) ; Alharthi, Fahad (IJCLab, Orsay) ; Auchmann, Bernhard (PSI, Villigen) ; Bartmann, Wolfgang (CERN) ; Benedikt, Michael (CERN) ; Besana, Maria Ilaria (CERN) ; Bettoni, Simona (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Calviani, Marco (CERN) ; Chaikovska, Iryna (IJCLab, Orsay) et al.
The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. [...]
2022 - 4 p.
- Published in : JACoW IPAC 2022 (2022) 2007-2010
Fulltext: PDF;
In : 13th International Particle Accelerator Conference (IPAC 2022), Bangkok, Thailand, 12 - 17 Jun 2022, pp.2007-2010
|
|
|
8.
|
Comparison of Different Matching Device Field Profiles for the FCC-ee Positron Source
/ Zhao, Yongke (Shandong U. ; CERN) ; Auchmann, Bernhard (PSI, Villigen) ; Chaikovska, Iryna (IJCLab, Orsay) ; Chehab, Robert (IJCLab, Orsay) ; Craievich, Paolo (PSI, Villigen) ; Döbert, Steffen (CERN) ; Kosse, Jaap (PSI, Villigen) ; Latina, Andrea (CERN) ; Ma, Lianliang (Shandong U.) ; Martyshkin, Pavel (Novosibirsk, IYF) et al.
In this report, we compared different matching device field profiles for the FCC-ee positron source. The matching device is used to capture positrons with magnetic field. [...]
JACoW, 2021 - 4 p.
- Published in : JACoW IPAC 2021 (2021) 2617-2620
Fulltext: PDF;
In : 12th International Particle Accelerator Conference (IPAC 2021), Online, 24 - 28 May 2021, pp.2617-2620
|
|
|
9.
|
Sub-Femtosecond Time-Resolved Measurements Based on a Variable Polarization X-Band Transverse Deflecting Structures for SwissFEL
/ Craievich, Paolo (PSI, Villigen) ; Aßmann, Ralph (DESY) ; Bopp, Markus (PSI, Villigen) ; Braun, Hans-Heinrich (PSI, Villigen) ; Catalán Lasheras, Nuria (CERN) ; Christie, Florian (DESY) ; D'Arcy, Richard (DESY) ; Ganter, Romain (PSI, Villigen) ; Grudiev, Alexej (CERN) ; Marchetti, Barbara (DESY) et al.
The SwissFEL project, under commissioning at the Paul Scherrer Institut (PSI), will produce FEL radiation for soft and hard X-rays with pulse durations ranging from a few to several tens of femtoseconds. A collaboration between DESY, PSI and CERN has been established with the aim of developing and building an advanced X-Band transverse deflector structure (TDS) with the new feature of providing variable polarization of the deflecting force. [...]
2018 - 4 p.
- Published in : 10.18429/JACoW-FEL2017-WEP040
Fulltext: PDF;
In : 38th International Free Electron Laser Conference, Santa Fe, New Mexico, USA, 20 - 25 Aug 2017, pp.WEP040
|
|
|
10.
|
Publication
|
avviso via mail personale
o iscriviti al 
feed RSS.