|
1.
|
Fine Tuning of the Inner Dipole Design of MCBXF Magnets
/ García-Matos, Jesús A (Madrid, CIEMAT ; Madrid, Polytechnic U.) ; Alcázar, Cristóbal (Madrid, CIEMAT) ; Domínguez, Manuel (Madrid, CIEMAT) ; Durán Lucas, Oscar (Madrid, CIEMAT) ; García-Tabarés, Luis (Madrid, CIEMAT) ; González Gómez, Luis Antonio (Madrid, CIEMAT) ; Gómez, Pablo (Madrid, CIEMAT) ; Jiménez, Jesús (Madrid, CIEMAT) ; Martínez, Teresa (Madrid, CIEMAT) ; Martins Jardim, Carla (Madrid, CIEMAT) et al.
Two types of nested orbit correctors are necessary for LHC upgrade, the so-called MCBXFA and MCBXFB. They share the same cross section, but feature different lengths, 2.5 and 1.5 m, respectively. [...]
2022 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4000405
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4000405
|
|
|
2.
|
Fabrication and Power Test of the Second MCBXFB Nested Orbit Corrector Prototype for HL-LHC
/ García-Matos, Jesús A (Madrid, CIEMAT ; Madrid, Polytechnic U.) ; Calero, Jesús (Madrid, CIEMAT) ; Domínguez, Manuel (Madrid, CIEMAT) ; Fernández, Alejandro (Madrid, CIEMAT) ; Gómez, Pablo (Madrid, CIEMAT) ; García-Tabarés, Luis (Madrid, CIEMAT) ; Martínez, Teresa (Madrid, CIEMAT) ; Jardim, Carla Martins (Madrid, CIEMAT) ; Munilla, Javier (Madrid, CIEMAT) ; Pardo, Jose A (Madrid, CIEMAT) et al.
The second prototype of the MCBXFB nested orbit corrector for the upgrade of the LHC has been manufactured at CIEMAT and assembled at CERN, in the framework of the HL-LHC project. This paper describes the changes introduced with respect to the first prototype in order to test some design improvements intended for the series magnets. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4000605
|
|
|
3.
|
Power Tests of the First Nested Orbit Corrector Prototype for HL-LHC
/ García-Matos, Jesús A (Madrid, CIEMAT ; Madrid, Polytechnic U.) ; Calero, Jesús (Madrid, CIEMAT) ; Domínguez, Manuel Ángel (Madrid, CIEMAT) ; Fernández, Alejandro (Madrid, CIEMAT) ; Gómez, Pablo (Madrid, CIEMAT) ; García-Tabarés, Luis (Madrid, CIEMAT) ; López, Daniel (Madrid, CIEMAT) ; Martínez, Luis Miguel (Madrid, CIEMAT) ; Martínez, Teresa (Madrid, CIEMAT) ; Munilla, Javier (Madrid, CIEMAT) et al.
The first prototype of the short orbit corrector for the upgrade of the LHC has been fabricated at CIEMAT, in collaboration with CERN, in the framework of the HL-LHC project. It consists of two nested dipoles, with an aperture of 150 mm and physical length of 1.5 m. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4002005
|
|
|
4.
|
Status of the 16 T Dipole Development Program for a Future Hadron Collider
/ Tommasini, Davide (CERN) ; Arbelaez, Diego (LBL, Berkeley) ; Auchmann, Bernhard (CERN) ; Bajas, Hugues (CERN) ; Bajko, Marta (CERN) ; Ballarino, Amalia (CERN) ; Barzi, Emanuela (Fermilab) ; Bellomo, Giovanni (INFN, Milan) ; Benedikt, Michael (CERN) ; Izquierdo Bermudez, Susana (CERN) et al.
A next step of energy increase of hadron colliders beyond the LHC requires high-field superconducting magnets capable of providing a dipolar field in the range of 16 T in a 50-mm aperture with accelerator quality. These characteristics could meet the requirements for an upgrade of the LHC to twice the present beam energy or for a 100-TeV center of mass energy future circular collider. [...]
2018 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4001305
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4001305
|
|
|
5.
|
The 16 T Dipole Development Program for FCC
/ Tommasini, Davide (CERN) ; Auchmann, B (CERN) ; Bajas, Hugues (CERN) ; Bajko, Marta (CERN) ; Ballarino, Amalia (CERN) ; Bellomo, Giovanni (INFN, Milan) ; Benedikt, Michael (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Bordini, Bernardo (CERN) ; Bottura, Luca (CERN) et al.
Abstract:
A key challenge for a future circular collider (FCC) with centre-of-mass energy of 100 TeV and a circumference in the range of 100 km is the development of high-field superconducting accelerator magnets, capable of providing a 16 T dipolar field of accelerator quality in a 50 mm aperture. This paper summarizes the strategy and actions being undertaken in the framework of the FCC 16 T Magnet Technology Program and the Work Package 5 of the EuroCirCol..
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4000405
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4000405
|
|
|
6.
|
Considerations on a Cost Model for High-Field Dipole Arc Magnets for FCC
/ Schoerling, Daniel (CERN) ; Durante, Maria (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR)) ; Lorin, Clement (CEA/IRFU,Centre d'etude de Saclay Gif-sur-Yvette (FR)) ; Martinez, Teresa (CIEMAT) ; Ruuskanen, Janne (Tampere University) ; Salmi, Tiina (Tampere University) ; Sorbi, Massimo (INFN Milano) ; Tommasini, Davide (CERN) ; Toral, Fernando (CIEMAT)
In the frame of the European Circular Collider (EuroCirCol), a conceptual design study for a post-Large Hadron Collider (LHC) research infrastructure based on an energy-frontier 100 TeV circular hadron collider [1]–[3], a cost model for the high-field dipole arc magnets is being developed. The aim of the cost model in the initial design phase is to provide the basis for sound strategic decisions towards cost effective designs, in particular: (A) the technological choice of superconducting material and its cost, (B) the target performance of Nb$_{3}$Sn superconductor, (C) the choice of operating temperature (D) the relevant design margins and their importance for cost, (E) the nature and extent of grading, and (F) the aperture’s influence on cost. [...]
CERN-ACC-2017-0027.-
Geneva : CERN, 2017
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4003105
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4003105
|
|
avviso via mail personale
o iscriviti al 
feed RSS.