|
1.
|
MQXFA Final Design Report
/ Ambrosio, Giorgio
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS) [...]
arXiv:2203.06723 ; FERMILAB-TM-2773-TD ; US-HiLumi-doc-948
-
120.
|
|
|
2.
|
|
|
Model Independent Approach of the JUNO $^8$B Solar Neutrino Program
/ JUNO Collaboration
The physics potential of detecting $^8$B solar neutrinos is exploited at the Jiangmen Underground Neutrino Observatory (JUNO), in a model independent manner by using three distinct channels of the charged-current (CC), neutral-current (NC) and elastic scattering (ES) interactions. [...]
arXiv:2210.08437.
-
24 p.
Fulltext
|
|
|
3.
|
Challenges and Lessons Learned From Fabrication, Testing, and Analysis of Eight MQXFA Low Beta Quadrupole Magnets for HL-LHC
/ Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (Brookhaven) ; Anerella, Michael (Brookhaven) ; Apollinari, Giorgio (Fermilab) ; Izquierdo, Gonzalo Arnau (CERN) ; Baldini, Maria (Fermilab) ; Ballarino, Amalia (CERN) ; Barth, Christian (CERN) ; Yahia, Anis Ben (Brookhaven) ; Blowers, James (Fermilab) et al.
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. [...]
arXiv:2301.09523; FERMILAB-PUB-22-855-TD.-
2023-08 - 8 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4003508
Fulltext: 2301.09523 - PDF; 81b192c337ae5d5acaec37450e135529 - PDF; External link: Fermilab Library Server
|
|
|
4.
|
Study of the Heater-Coil Electrical Insulation for the HL-LHC Low Beta Quadrupoles
/ Marinozzi, Vittorio (Fermilab) ; Ambrosio, Giorgio (Fermilab) ; Baldini, Maria (Fermilab) ; Izquierdo Bermudez, Susana (CERN) ; Ferracin, Paolo (LBL, Berkeley) ; Krave, Steven (Fermilab) ; Muratore, Joseph (BNL, NSLS) ; Nobrega, Alfred (Fermilab) ; Parker, Marcellus (Fermilab) ; Todesco, Ezio (CERN) et al.
In the framework of the HL-LHC project, the present LHC low-β superconducting quadrupoles will be substituted with higher performance Nb3Sn magnets (MQXF) with 11.4 T coil peak field. MQXF coils are impregnated with epoxy resin to reduce risk of stress concentration on the brittle conductor. [...]
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4001705
|
|
|
5.
|
Assessment of MQXF Quench Heater Insulation Strength and Test of Modified Design
/ Baldini, Maria (Fermilab) ; Ambrosio, Giorgio (Fermilab) ; Anerella, Michael D (Brookhaven) ; Bermudez, Susana I (CERN) ; Bossert, Rodger C (Fermilab) ; Ferracin, Paolo (LBL, Berkeley) ; Krave, Steven (Fermilab) ; Mangiarotti, Franco J (CERN) ; Marinozzi, Vittorio (Fermilab) ; Nobrega, Alfred (Fermilab) et al.
The HL-LHC interaction region magnet triplets (Q1,Q2, and Q3) will be composed of superconducting Nb3Sn quadru-poles. The MQXF quadrupole protection system is based on CLIQ (Coupling-Loss Induced Quench system) and outer layer quench heaters.This paper reports a summary of quench heaters to coil high voltage tests performed on MQXF short and long coils in air after fabrication, and in air and He gas after magnet training. [...]
FERMILAB-PUB-20-617-TD.-
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4701305
Fulltext: PDF; External link: Fermilab Accepted Manuscript
In : Applied Superconductivity Conference, Online, 24 Oct - 7 Nov 2020
|
|
|
6.
|
Lessons learned from the prototypes of the MQXFA Low Beta Quadrupoles for HL-LHC and status of production in the US
/ Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (BNL, NSLS) ; Anerella, Michael (BNL, NSLS) ; Apollinari, Giorgio (Fermilab) ; Baldini, Maria (Fermilab) ; Blowers, Jamie (Fermilab) ; Bossert, Rodger (Fermilab) ; Carcagno, Ruben (Fermilab) ; Cheng, Daniel W (BNL, NSLS) ; Chlachidze, Guram (Fermilab) et al.
With the successful test of the first two pre-series magnets the US HL-LHC Accelerator Upgrade Project has started production of the MQXFA magnets to be used in Q1/Q3 inner triplet elements of the HL-LHC. This good start comes after the test of two prototypes with limited performance, and it demonstrates the importance of learning from past issues. [...]
FERMILAB-PUB-20-618-TD.-
2021 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4001105
Fulltext: PDF;
|
|
|
7.
|
Magnetic Field Measurements of First Pre-series Full-Length 4.2 m Quadrupole MQXFA03 Using PCB Rotating Coils for the Hi-Lumi LHC Project
/ Song, Honghai (Stony Brook U.) ; Ambrosio, Giorgio (Fermilab) ; Amm, Kathleen (Brookhaven) ; Anerella, Michael (Brookhaven) ; Apollinari, Giorgio (Fermilab) ; Cheng, Daniel (LBNL) ; Chlachidze, Guram (Fermilab) ; DiMarco, Joseph (Fermilab) ; Feher, Sandor (Fermilab) ; Ferracin, Paolo (LBNL) et al.
The U.S. Hi-Lumi LHC Accelerator Upgrade Project (AUP) and CERN have joined efforts to develop high field quad-rupoles for the Hi-Lumi LHC upgrade. [...]
FERMILAB-PUB-21-038-TD.-
2021 - 7 p.
- Published in : IEEE Trans. Appl. Supercond. 31 (2021) 4000207
Fulltext: PDF; External link: Fermilab Accepted Manuscript
In : Applied Superconductivity Conference, Online, 24 Oct - 7 Nov 2020, pp.4000207
|
|
|
8.
|
Test Results of the CERN HL-LHC low-$\beta$ Quadrupole Short Models MQXFS3c and MQXFS4
/ Mangiarotti, Franco J (CERN) ; Bajas, Hugues (CERN) ; Ambrosio, Giorgio (Fermilab) ; Bajko, Marta (CERN) ; Bordini, Bernardo (CERN) ; Bourcey, Nicolas (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Desbiolles, Vincent (CERN) ; Feuvrier, Jerome (CERN) ; Fleiter, Jerome (CERN) et al.
/LARP
For the High Luminosity Upgrade of the CERN Large Hadron Collider, lower $\beta$* quadrupole magnets based on advanced Nb3Sn conductors will be installed on each side of the ATLAS and CMS experiment insertion zones. As part of the technological developments needed to achieve the required field gradient of 132.6 T/m within a 150-mm aperture, short length model magnets, named MQXFS, are tested both at the CERN SM18 and FERMI Lab test facilities. [...]
FERMILAB-PUB-19-055-TD.-
2019 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001705
Fulltext: PDF;
In : Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.4001705
|
|
|
9.
|
The HL-LHC Low-$\beta$ Quadrupole Magnet MQXF: from Short Models to Long Prototypes
/ Ferracin, Paolo (CERN) ; Ambrosio, Giorgio (Fermilab) ; Anerella, Michael (Brookhaven) ; Bajas, Hugues (CERN) ; Bajko, Marta (CERN) ; Bordini, Bernardo (CERN) ; Bossert, Rodger (Fermilab) ; Bourcey, Nicolas (CERN) ; Cheng, Daniel W (LBL, Berkeley) ; Chlachidze, Guram (Fermilab) et al.
Among the components to be upgraded in LHC inter- action regions for the HiLumi-LHC projects are the inner triplet (or low-β) quadrupole magnets, denoted as Q1, Q2a, Q2b, and Q3. The new quadrupole magnets, called MQXF, are based on Nb3 Sn superconducting magnet technology and operate at a gradient of 132.6 T/m, with a conductor peak field of 11.4 T. [...]
FERMILAB-PUB-19-008-TD.-
2019 - 9 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001309
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 9700701
Fulltext: PDF;
In : Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.4001309
|
|
|
10.
|
Coil End Parts Development Using BEND and Design for MQXF by LARP
/ Yu, Miao (Fermilab) ; Ambrosio, G (Fermilab) ; Izquierdo Bermudez, S (CERN) ; Bossert, R (Fermilab) ; Ferracin, P (CERN) ; Krave, S (Fermilab)
/LARP
End parts are critical components for saddle-shaped coils. They have a structural function where the cables are deformed in order to cross over the magnet aperture. [...]
FERMILAB-CONF-16-349-TD.-
2017 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4000105
Fulltext: PDF; External link: FERMILABCONF
In : Applied Superconductivity Conference, Denver, CO, USA, 4 - 9 Sep 2016, pp.4000105
|
|
email alert
or subscribe to the 
RSS feed.