CERN Accelerating science

Article
Title Use of High Resolution DAQ System to Aid Diagnosis of HD2b, a High Performance Nb$_3$Sn Dipole
Author(s) Lizarazo, J (LBNL, Berkeley) ; Doering, D (LBNL, Berkeley) ; Doolittle, L (LBNL, Berkeley) ; Galvin, J (LBNL, Berkeley) ; Caspi, S (LBNL, Berkeley) ; Dietderich, D R (LBNL, Berkeley) ; Felice, H (LBNL, Berkeley) ; Ferracin, P (LBNL, Berkeley) ; Godeke, A (LBNL, Berkeley) ; Joseph, J M (LBNL, Berkeley) ; Lietzke, A F (LBNL, Berkeley) ; Ratti, A (LBNL, Berkeley) ; Sabbi, G -L (LBNL, Berkeley) ; Trillaud, F (LBNL, Berkeley) ; Wang, X R (LBNL, Berkeley) ; Zimmerman, S (LBNL, Berkeley)
Publication 2009
Number of pages 5
In: IEEE Trans. Appl. Supercond. 19 (2009) 2345-2349
DOI 10.1109/tasc.2009.2019036
Subject category Accelerators and Storage Rings
Accelerator/Facility, Experiment CERN LHC
Project CERN HL-LHC
Abstract A novel voltage monitoring system to record voltage transients in superconducting magnets is being developed at LBNL . This system has 160 monitoring channels capable of measuring differential voltages of up to 1.5 kV with 100 kHz bandwidth and 500 kS/s digitizing rate. This paper presents analysis results from data taken with a 16 channel prototype system. From that analysis we were able to diagnose a change in the current-temperature margin of the superconducting cable by analysing Flux-Jump data collected after a magnet energy extraction failure during testing of a high field Nb$_3$Sn dipole.
Copyright/License © 2009-2025 IEEE

Corresponding record in: Inspire


 Záznam vytvorený 2021-10-05, zmenený 2021-10-05