CERN Accelerating science

Published Articles
Report number	CERN-ACC-2019-255
Title	Design, production, and testing of superconducting magnets for the Super-FRS
Author(s)	Müller, Hans (Darmstadt, GSI) ; Allain, Hervé (IRFU, Saclay) ; Borceto, Alice (ASG Supercond., Genova) ; Cho, Eun Jung (Darmstadt, GSI) ; Daly, Michael (IRFU, Saclay) ; Drago, Giovanni (ASG Supercond., Genova) ; Golluccio, Giancarlo (Darmstadt, GSI) ; Grafin, Pierre (IRFU, Saclay) ; Lucas, Julio (Elytt, Madrid) ; Madur, Arnaud (IRFU, Saclay) ; Munoz-Garcia, Jorge (IRFU, Saclay) ; Quettier, Lionel (IRFU, Saclay) ; Reymond, Hugo (IRFU, Saclay) ; Roux, Christian (Darmstadt, GSI) ; Simon, Haik (Darmstadt, GSI) ; Sugita, Kei (Darmstadt, GSI) ; Valesi, Giovanni (ASG Supercond., Genova) ; Van Den Boogaard, Lisette (CERN) ; Ventura, Diego (ASG Supercond., Genova) ; Winkler, Martin (Darmstadt, GSI)
Publication	2019
Number of pages	4
In:	10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.THPTS011
DOI	10.18429/JACoW-IPAC2019-THPTS011
Subject category	Accelerators and Storage Rings
Abstract	The Super FRS is a two-stage in flight separator to be built next to the site of GSI, Darmstadt, Germany as part of FAIR (Facility for Anti-proton and Ion Research). Its purpose is to create and separate rare isotope beams and to enable the mass measurement also for very short lived nuclei. Due to its three branches a wide variety of experiments can be carried out in frame of the NUSTAR collaboration. Due to the large acceptance needed, the magnets of the Super-FRS have to have a large aperture and therefore only a superconducting solution is feasible. A superferric design with superconducting coils was chosen in which the magnetic field is shaped by an iron yoke. For the dipoles this iron yoke is at warm and only the coils are incorporated in a cryostat. The multiplets, assemblies of quadrupoles and higher order multipole magnets, are completely immersed in a liquid Helium bath. With the exception of special branching dipoles all superconducting magnets of Super-FRS have been contracted and are being built by Elytt in Spain (dipoles) and ASG in Italy (multiplets). The cold test of all magnets will take place in a dedicated test facility at CERN. This contribution will present the status of manufacturing of dipoles and multiplets, and also gives a short overview on the test facility.
Copyright/License	Publication: (License: CC-BY-3.0)

Corresponding record in: Inspire