CERN Accelerating science

Published Articles
Title	Coil manufacturing process of the first 1-m-long Canted–Cosine–Theta (CCT) model magnet at PSI
Author(s)	Montenero, Giuseppe (PSI, Villigen) ; Auchmann, Bernhard (CERN ; PSI, Villigen) ; Arbelaez, Diego (LBNL, Berkeley) ; Brouwer, Lucas (LBNL, Berkeley) ; Caspi, Shlomo (LBNL, Berkeley) ; Felder, Roland (PSI, Villigen) ; Lackner, Friedrich (CERN) ; Sanfilippo, Stephane (PSI, Villigen) ; Sidorov, Serguei (PSI, Villigen) ; Smekens, David (CERN) ; Swanson, J H (LBNL, Berkeley)
Publication	2019
Number of pages	6
Note	Invited Paper
In:	IEEE Trans. Appl. Supercond. 29 (2019) 4002906
DOI	10.1109/TASC.2019.2897326
Subject category	Accelerators and Storage Rings
Abstract	At the Paul Scherrer Institute (PSI), the Canted-Cosine-Theta (CCT) magnet program aims at demonstrating that CCT technology is a viable candidate for the development of 16-T dipole magnets, required for future circular colliders. The first step in this direction is the implementation of a Nb$_3$Sn 1-m-long, two-layer CCT single-aperture dipole, referred to as Canted Dipole One (CD1), which is designed to achieve a peak field in the bore of  11 T. The in-house manufacturing and assembly of CD1 requires the infrastructure for a number of fabrication steps to be set up at PSI. In this paper, the authors review the coil manufacturing process of Nb$_3$Sn CCT model magnets at PSI and describe the related commissioning phase.
Copyright/License	Publication: © 2019-2024 IEEE

Corresponding record in: Inspire