| Published Articles | |
| Report number | FERMILAB-PUB-19-052-TD |
| Title | Summary of the Mechanical Performances of the 1.5 m Long Models of the Nb$^3$Sn Low-$\beta$ Quadrupole MQXF |
| Author(s) | Vallone, Giorgio (LBL, Berkeley) ; Ambrosio, Giorgio (Fermilab) ; Anderssen, Eric C (LBL, Berkeley) ; Bajas, Hugo (CERN) ; Bourcey, Nicolas (CERN) ; Cheng, Daniel W (LBL, Berkeley) ; Chlachidze, Guram (Fermilab) ; Ferracin, Paolo (CERN) ; Grosclaude, Philippe (CERN) ; Guinchard, Michael (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Juchno, Mariusz (LBL, Berkeley) ; Pan, Heng (LBL, Berkeley) ; Perez, Juan Carlos (CERN) ; Prestemon, Soren (LBL, Berkeley) ; Strauss, Thomas (Fermilab) |
| Collaboration | LARP |
| Publication | 2019 |
| Number of pages | 5 |
| In: | IEEE Trans. Appl. Supercond. 29 (2019) 4002805 |
| In: | Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.4002805 |
| DOI | 10.1109/TASC.2019.2898327 |
| Subject category | Accelerators and Storage Rings |
| Accelerator/Facility, Experiment | LARP |
| Abstract | The Nb3Sn quadrupole MQXF is being developed as a part of the LHC High Luminosity upgrade. The magnet design was tested on 1:5m long short models, sharing the same cross-section with the full-length magnets. Various azimuthal and longitudinal preloads were applied, studying the impact on the magnet training and on its mechanical performances. The experiments demonstrated the possibility to control the magnet prestress. However, various factors, coil size among the others, may affect the stress variation between and within each winding. This variation could prevent the magnet to reach the desired performances, for example as result of critical current degradation of the Nb3Sn strands. This paper analyzes the mechanical performances of the short models, studying in particular the stress variation on different coils. The measured coil size was used as input in the numerical simulations, and results were then compared with the strain gauge measurements. Finally, the short models experience was used to evaluate the feasibility of a loading operation that does not rely on the strain measurements. |
Corresponding record in: Inspire
Rekord stworzony 2019-08-16, ostatnia modyfikacja 2021-05-11
