| Preprint | |
| Report number | arXiv:1904.11700 |
| Title | Full Scale Proton Beam Impact Testing of new CERN Collimators and Validation of a Numerical Approach for Future Operation |
| Author(s) | Bergeret, M. (CERN) ; Nuiry, F-X (CERN) ; Calviani, M. (CERN) ; Fraser, M.A. (CERN) ; Butcher, M. (CERN) ; Grec, L-M (CERN) ; Gentini, L. (CERN) ; Lechner, A. (CERN) ; Frankl, M. (CERN) ; Rizzoglio, V. (CERN) ; Burger, S. (CERN) ; Cherif, A. (CERN) |
| Publication | 2019 |
| Imprint | 2019-04-26 |
| Number of pages | 23 |
| Note | 22 pages, 17 figures, Prepared for submission to JINST |
| Subject category | hep-ex ; Particle Physics - Experiment ; physics.acc-ph ; Accelerators and Storage Rings |
| Abstract | New collimators are being produced at CERN in the framework of a large particle accelerator upgrade project to protect beam lines against stray particles. Their movable jaws hold low density absorbers with tight geometric requirements, while being able to withstand direct proton beam impacts. Such events induce considerable thermo-mechanical loads, leading to complex structural responses, which make the numerical analysis challenging. Hence, an experiment has been developed to validate the jaw design under representative conditions and to acquire online results to enhance the numerical models. Two jaws have been impacted by high-intensity proton beams in a dedicated facility at CERN and have recreated the worst possible scenario in future operation. The analysis of online results coupled to post-irradiation examinations have demonstrated that the jaw response remains in the elastic domain. However, they have also highlighted how sensitive the jaw geometry is to its mounting support inside the collimator. Proton beam impacts, as well as handling activities, may alter the jaw flatness tolerance value by $\pm$ 70 ${\mu}$m, whereas the flatness tolerance requirement is 200 ${\mu}$m. In spite of having validated the jaw design for this application, the study points out numerical limitations caused by the difficulties in describing complex geometries and boundary conditions with such unprecedented requirements. |
| Other source | Inspire |
| Copyright/License | preprint: (License: CC-BY-4.0) |
Запись создана 2019-05-14, последняя модификация 2024-03-26
