| A summary of SSC dipole magnet field quality measurements (p. 137) |
| by Wanderer, P J |
| A proposed IR quad for the SSC (p. 243) |
| by Caspi, S |
| Results from a partial lifetime test of a 40 mm-aperture 17 mm SSC model dipole (p. 551) |
| by Radusewicz, P |
| Eddy current inspection of superconducting cable during manufacturing (p. 677) |
| by Bein, D |
| SSCL quality program overview |
| by Hedderick, R V |
| Construction and test results from 1.8 m-long, 50 mm aperture SSC model collider dipoles |
| by Muratore, J F |
| Summaries of performance of 40-mm and 50-mm aperture SSC/BNL collider dipole magnet prototypes |
| by Anerella, M |
| Software design philosophy for the SSC magnet test laboratory |
| by Lambert, J D |
| Cold weld analysis in SSC strand and cable |
| by Seuntjens, J M |
| System design overview for the magnet test database system |
| by Ivey, J C |
| Review of SSC dipole magnet mechanics and quench performance |
| by Devred, Arnaud |
| Magnetic field measurements of Fermilab/General Dynamics built full scale SSC collider dipole magnets |
| by Delchamps, S W |
| Magnetic measurement instrumentation developments at the SSC |
| by Wolf, Z R |
| Design and use of a mechanical gauge for measuring alignment of critical features of string test magnets |
| by Wolman, D |
| The effect of vacuum gas pressures and species on internal heat leak in the SSCL magnet design |
| by Franks, D E |
| SDC detector foundation requirements |
| by Western, J L |
| An engineering design study of detector deformation limits in the SSC SDC-detector |
| by Leung, K K |
| Cable keystone angle optimization for 40-mm SSC quadrupole magnet development |
| by Capone, D W |
| A dynamic model for beam tube vacuum effects on the SSC cryogenic system |
| by Carcagno, R H |
| Conceptual design of the SSC cryogenic transfer lines |
| by Zhang, B |
| The magnet database system |
| by Ball, M J |
| GIS/FIS development for the SSC |
| by Oslin, A |
| Measured control characteristics of the half-cell 40mm aperture magnet string |
| by McInturff, A |
| A facility description of the SSCL magnet test laboratory |
| by Coles, M W |
| Mechanical behavior of Fermilab/General Dynamics built 15m SSC collider dipoles |
| by Wake, M |
| SSC education : science to capture the imagination |
| by Gadsden, T |
| Measurement of the elastic modulus of kapton perpendicular to the plane of the film at room and cryogenic temperatures |
| by Davidson, M P |
| 84 K nitrogen system for the SSC |
| by McAshan, M S |
| Sucessful NEPA compliance at the Superconducting Super Collider Laboratory : a case study |
| by Corning, B C |
| Medical surveillance of employee health at the Superconducting Super Collider Laboratory |
| by Chester, T J |
| A version of the radiation-resistant fast calorimeter |
| by Akimov, Yu K |
| Connectivity among computer-aided engineering methods, procedures, and tools used in developing the SSC collider magnets |
| by Kallas, N |
| Overview of SSC accelerator requirements |
| by Dugan, G F |
| The SSC linac : status of design and procurement activities |
| by Funk, L W |
| Construction experience with Fermilab-built full length 50mm SSC dipoles |
| by Blessing, M J |
| Summary of production development, details, and results for model dipoles at SSCL |
| by Dwyer, S J |
| Concept design of the high voltage transmission system for the collider tunnel |
| by Norman, L S |
| The cryogenic system for the MTL magnet test stands |
| by Shu, Q S |
| Analytical study of the thermal insulation system in the interconnect region of the SSC collider magnets |
| by Jalloh, A R |
| Utilization of gamma ray inspection system for tomographic imaging and dimensional analysis of complete model magnet cold masses and collared coil sections |
| by Bein, D |
| An updated overview of the LEB rf system |
| by Rogers, J D |
| Transient cooldown stresses in superconducting collider dipole magnet |
| by Leung, K K |
| Implementing corrective actions from the failure reporting, analysis and corrective action system (FRACAS) to achieve magnet reliability and availability goals |
| by Arden, C S |
| A statistical rationale for establishing process quality control limits using fixed sample size, for critical current verification of SSC superconducting wire |
| by Pollock, D A |
| Structural dynamic analysis of the SSC 40 mm collider dipole magnet under transportation loads |
| by Jalloh, A R |
| SSCL magnet systems quality program implementation for laboratory and industry |
| by Warner, D G |
| A design for a high voltage magnet coil ringer test set |
| by Koska, W |
| Mechanical design and finite element analysis of the SDC central calorimeter |
| by Guarino, V |
| Systems engineering at the Superconducting Super Collider |
| by Nonte, J |