CERN Accelerating science

Published Articles
Title A drift chamber with a new type of straws for operation in vacuum
Author(s) Azorskiy, N (Dubna, JINR) ; Glonti, L (Dubna, JINR) ; Gusakov, Yu (Dubna, JINR) ; Elsha, V (Dubna, JINR) ; Enik, T (Dubna, JINR) ; Kakurin, S (Dubna, JINR) ; Kekelidze, V (Dubna, JINR) ; Kislov, E (Dubna, JINR) ; Kolesnikov, A (Dubna, JINR) ; Madigozhin, D (Dubna, JINR) ; Movchan, S (Dubna, JINR) ; Polenkevich, I (Dubna, JINR) ; Potrebenikov, Yu (Dubna, JINR) ; Samsonov, V (Dubna, JINR) ; Shkarovskiy, S (Dubna, JINR) ; Sotnikov, S (Dubna, JINR) ; Zinchenko, A (Dubna, JINR) ; Danielsson, H (CERN) ; Bendotti, J (CERN) ; Degrange, J (CERN) ; Dixon, N (CERN) ; Lichard, P (CERN) ; Morant, J (CERN) ; Palladino, V (CERN) ; Gomez, F Perez (CERN) ; Ruggiero, G (CERN) ; Vergain, M (CERN)
Publication 2016
Number of pages 2
In: Nucl. Instrum. Methods Phys. Res., A 824 (2016) 569-570
In: Frontier Detectors for Frontier Physics: 13th Pisa Meeting on Advanced Detectors, La Biodola, Isola D'elba, Italy, 24 - 30 May 2015, pp.569-570
DOI 10.1016/j.nima.2015.11.112
Subject category Detectors and Experimental Techniques
Abstract A 2150×2150 mm 2 registration area drift chamber capable of working in vacuum is presented. Thin-wall tubes (straws) of a new type are used in the chamber. A large share of these 9.80 mm diameter drift tubes are made in Dubna from metalized 36 µm Mylar film welded along the generatrix using an ultrasonic welding machine created at JINR. The main features of the chamber and some characteristics of the drift tubes are described. Four such chambers with the X, Y, U, V coordinates each, containing 7168 straws in total, are designed and produced at JINR and CERN. They are installed in the vacuum volume of the NA62 setup in order to study the ultra-rare decay K+→π+vv¯ and to search for and study rare meson decays. In autumn 2014 the chambers were used for the first time for the data taking in the experimental run of the NA62 at CERN׳s SPS.
Copyright/License Elsevier B.V.

Corresponding record in: Inspire


 Záznam vytvorený 2017-05-10, zmenený 2017-07-31