CERN Accelerating science

Article
Title The NA62 spectrometer acquisition system
Author(s) Azorskiy, N (Dubna, JINR) ; Ceccucci, A (CERN) ; Bendotti, J (CERN) ; Danielsson, H (CERN) ; Degrange, J (CERN) ; Dixon, N (CERN) ; Elsha, V (Dubna, JINR) ; Enik, T (Dubna, JINR) ; Glonti, L (Dubna, JINR) ; Gusakov, Y (Dubna, JINR) ; Kakurin, S (Dubna, JINR) ; Kekelidze, V (Dubna, JINR) ; Kislov, E (Dubna, JINR) ; Kolesnikov, A (Dubna, JINR) ; Koval, M (Comenius U.) ; Lichard, P (CERN) ; Madigozhin, D (Dubna, JINR) ; Morant, J (CERN) ; Movchan, S (Dubna, JINR) ; Gomez, F Perez (CERN) ; Palladino, V (CERN) ; Polenkevich, I (Dubna, JINR) ; Potrebenikov, Y (Dubna, JINR) ; Ruggiero, G (CERN) ; Samsonov, V (Dubna, JINR) ; Shkarovskiy, S (Dubna, JINR) ; Sotnikov, A (Dubna, JINR)
Publication 2016
Number of pages 10
In: JINST 11 (2016) C02064
In: Topical Workshop on Electronics for Particle Physics, Lisbon, Portugal, 28 Sep - 2 Oct 2015, pp.C02064
DOI 10.1088/1748-0221/11/02/C02064
Subject category Detectors and Experimental Techniques
Accelerator/Facility, Experiment CERN SPS ; NA62
Abstract The NA62 low mass spectrometer consists of 7000 straw tubes operating in vacuum. The front-end electronics is directly mounted on the detector and connected by a flexible PCB. The front-end board provides the amplification, shaping, discrimination and time measurements of the analogue signals from 16 channels. After digitisation the data is sent to a VME 9U read-out board. The data, once matched with the trigger, is sent to the next step and used by the trigger level 1 algorithm. The front-end and read-out systems of the detector will be presented along with the first results of the detector performances.
Copyright/License publication: © 2016-2024 CERN (License: CC-BY-3.0)
cc-by

Corresponding record in: Inspire


 Δημιουργία εγγραφής 2017-02-14, τελευταία τροποποίηση 2022-08-10


IOP Open Access article:
Κατέβασμα πλήρες κειμένου
PDF