| Magnetic Field Measurement of 2-m-Long Model of Beam Separation Dipole for the HL-LHC Upgrade (p. 600705) |
| by Enomoto, Shun |
| Surface Resistance of Superconductors in the Presence of a DC Magnetic Field: Frequency and Field Intensity Limits (p. 3500506) |
| by Calatroni, Sergio |
| Coil End Parts Development Using BEND and Design for MQXF by LARP (p. 4000105) |
| by Yu, Miao |
| Performance of the first short model 150 mm aperture Nb$_3$Sn Quadrupole MQXFS for the High-Luminosity LHC upgrade (p. 4000205) |
| by Chlachidze, G |
| The 16 T Dipole Development Program for FCC (p. 4000405) |
| by Tommasini, Davide |
| Quench Performance and Field Quality of FNAL Twin-Aperture 11 T Nb$_{3}$Sn Dipole Model for LHC Upgrades (p. 4000705) |
| by Stoynev, S |
| Design Optimization of the $Nb_3Sn$ 11 T Dipole for the High Luminosity LHC (p. 4001005) |
| by Nilsson, Emelie |
| The EuroCirCol 16T Cosine–Theta Dipole Option for the FCC (p. 4001205) |
| by Sorbi, Massimo |
| A Consistent Simulation of Electrothermal Transients in Accelerator Circuits (p. 4001305) |
| by Bortot, Lorenzo |
| EuroCirCol 16 T Block-Coils Dipole Option for the Future Circular Collider (p. 4001405) |
| by Lorin, Clement |
| Design of a Canted-Cosine-Theta Superconducting Dipole Magnet for Future Colliders (p. 4001505) |
| by Caspi, Shlomo |
| Magnetic Analysis of the Nb$_3$Sn low-beta Quadrupole for the High Luminosity LHC (p. 4001905) |
| by Izquierdo Bermudez, S |
| Design of ERMC and RMM, the Base of the $Nb_3Sn$ 16 T Magnet Development at CERN (p. 4002004) |
| by Izquierdo Bermudez, Susana |
| Quench Level of the HL-LHC $Nb_3Sn$ IR Quadrupoles (p. 4002105) |
| by Breschi, Marco |
| Magnetic measurements and analysis of the first 11-T Nb$_3$ Sn 2-in-1 model for HL-LHC (p. 4002204) |
| by Fiscarelli, Lucio |
| Decay and snapback in Nb$_{3}$Sn dipole magnets (p. 4002306) |
| by Bermudez, S Izquierdo |
| Fabrication and Test Results of the First 2 m Model Magnet of Beam Separation Dipole for the HL-LHC Upgrade (p. 4002409) |
| by Sugano, Michinaka |
| Cold Powering Performance of the First 2 m $Nb_3Sn$ DS11T Twin-Aperture Model Magnet at CERN (p. 4002505) |
| by Willering, G P |
| Status of the Long MQXFB Nb$_3$Sn Coil Prototype Production for the HiLumi LHC (p. 4002605) |
| by Lackner, Friedrich |
| Performance of CERN LHC Main Dipole Magnets on the Test Bench From 2008 to 2016 (p. 4002705) |
| by Willering, G P |
| Hi-Lumi LHC Twin-Aperture Orbit Correctors Magnet System Optimisation (p. 4002805) |
| by Kirby, Glyn A |
| Mechanical Properties of the HL-LHC 11 T $Nb_3Sn$ Magnet Constituent Materials (p. 4003007) |
| by Scheuerlein, Christian |
| Considerations on a Cost Model for High-Field Dipole Arc Magnets for FCC (p. 4003105) |
| by Schoerling, Daniel |
| Construction and Cold Test of the First Superferric Corrector Magnet for the LHC Luminosity Upgrade (p. 4003205) |
| by Statera, Marco |
| First Cold Powering Test of REBCO Roebel Wound Coil for the EuCARD2 Future Magnet Development Project (p. 4003307) |
| by Kirby, Glyn A |
| Progress on the Development of the $Nb_3Sn$ 11T Dipole for the High Luminosity Upgrade of LHC (p. 4003505) |
| by Savary, Frederic |
| Fabrication of First 4-m Coils for the LARP MQXFA Quadrupole and Assembly in Mirror Structure (p. 4003605) |
| by Holik, E F |
| Mechanical Design Studies of the MQXF Long Model Quadrupole for the HiLumi LHC (p. 4004105) |
| by Pan, H |
| Optimization of Nb$_{3}$Sn Rutherford Cables Geometry for the High Luminosity LHC (p. 4004305) |
| by Fleiter, Jerome |
| Mechanical Effects of the Non-Uniform Current Distribution on HTS Coils for Accelerators Wound with REBCO Roebel Cable (p. 4100405) |
| by Murtomaki, Jaakko S |
| Design of 4 Tm Forward Dipoles for the FCC-hh Detector Magnet System (p. 4500306) |
| by Mentink, Matthias |
| Next Generation of Quench Detection Systems for the High-Luminosity Upgrade of the LHC (p. 4700204) |
| by Denz, Reiner |
| Overview of the Performance of Quench Heaters for High-Current LHC Superconducting Magnets (p. 4700405) |
| by Charifoulline, Zinour |
| Quench Protection System Optimization for the High Luminosity LHC Nb $_3$Sn Quadrupoles (p. 4702107) |
| by Ravaioli, E |
| Suitability of Different Quench Protection Methods for a 16 T Block-Type $Nb_3Sn$ Accelerator Dipole Magnet (p. 4702305) |
| by Salmi, Tiina |
| Quench Protection Study of the Eurocircol 16 T cosθ Dipole for the Future Circular Collider (FCC) (p. 4702505) |
| by Marinozzi, Vittorio |
| Training Behavior of the Main Dipoles in the Large Hadron Collider (p. 4702807) |
| by Todesco, Ezio |
| Demonstration of the ReBCO CORC 47kA@10T/4.2K Cable-In-Conduit-Conductor and its Joint Terminals at 4.5 and 77 K (p. 4801004) |
| by Mulder, T |
| Cable Conductor Design for the High-Power MgB2 DC Superconducting Cable Project of BEST PATHS (p. 4801405) |
| by Bruzek, Christian E |
| Transient Thermoelectrical Behavior of MgB2 Cables in the Superconducting Links for the High Luminosity Upgrade of the LHC (p. 4801505) |
| by Yang, Yifeng |
| Evaluation of the effects of mechanical cycles on bonding of Al-superconducting cable in high-performance stabilized NbTi conductor (p. 4802004) |
| by Curreli, Sebi |
| Testing Mechanical Behavior of Nb$_3$Sn Rutherford Cable During Coil Winding (p. 4802105) |
| by Pulikowski, Dariusz |
| Investigation of Splice Resistances of High-Current MgB2 Cables Operated in Liquid and Helium Gas (p. 4802505) |
| by Giannelli, S |
| Heat Treatment Optimization of Rutherford Cables for a 15-T Nb$_3$Sn Dipole Demonstrator (p. 4802905) |
| by Barzi, Emanuela |
| The Bundle-Barrier PIT Wire Developed for the HiLumi LHC Project (p. 6000706) |
| by Bordini, Bernardo |
| Synchrotron Microtomography Investigation of the Filament Microstructure in Differently Processed Bi-2212 Wires (p. 6400205) |
| by Scheuerlein, Christian |
| In-Field Electrical Resistance at 4.2 K of REBCO Splices (p. 6603305) |
| by Fleiter, Jerome |
| Artificial Pinning in Nb$_3$Sn Wires (p. 8001205) |
| by Spina, Tiziana |
| Extrapolative Scaling Expression: A Fitting Equation for Extrapolating Full $I_c (B,T,ϵ)$ Data Matrixes From Limited Data (p. 8400607) |
| by Ekin, Jack |
| Magnetic Measurements of the First Nb$_3$Sn Model Quadrupole (MQXFS) for the High-Luminosity LHC (p. 9000105) |
| by DiMarco, J |
| A New Cryogenic Test Facility for Large and Heavy Superconducting Magnets (p. 9500105) |
| by Serio, Luigi |
| Fabrication and Assembly of the $Nb_3Sn$ Dipole Magnet FRESCA2 (p. 9500205) |
| by Rochepault, Etienne |
| Upgrade of the CERN Superconducting Magnet Test Facility (p. 9500307) |
| by Bajko, Marta |
Conference home page