|
Author(s)
|
Buytaert, J (CERN) ; Collins, P (CERN) ; Dumps, R (CERN) ; Greening, E (Oxford U.) ; John, M (Oxford U.) ; Leflat, A (SINP, Moscow) ; Li, Y (Qinghua U.) ; Mapelli, A (CERN) ; Nomerotski, A (CERN ; Oxford U.) ; Romagnoli, G (Genoa U.) ; Verlaat, B (CERN ; NIKHEF, Amsterdam) |
|
Abstract
| Local thermal management of detector electronics through ultra-thin micro-structured silicon cooling plates is a very promising technique for pixel detectors in high energy physics experiments, especially at the LHC where the heavily irradiated sensors must be operated at temperatures below − 20 1 C. It combines a very high thermal ef fi ciency with a very low addition of mass and space, and suppresses all problems of CTE mismatch between the heat source and the heat sink. In addition, the use of CO 2 as evaporative coolant liquid brings all the bene fi ts of reliable and stable operation, but the high pressures involved impose additional challenges on the micro channel design and the fl uidic connectivity. A series of designs have already been prototyped and tested for LHCb. The challenges, the current status of the measurements and the solutions under development will be described |