CERN Accelerating science

Article
Report number CERN-ACC-2014-0058
Title Wake field monitors in a multi purpose X Band accelerating structure
Author(s) Dehler, M (PSI, Villigen) ; Bettoni, S (PSI, Villigen) ; Beutner, B (PSI, Villigen) ; de Michele, G (PSI, Villigen ; Ecole Polytechnique, Lausanne ; CERN)
Publication 2013
Imprint 2013-09-19
In: 2nd International Beam Instrumentation Conference, Oxford, UK, 16 - 19 Sep 2013, pp.WEBL3
Subject category Accelerators and Storage Rings ; 12: Innovative Radio Frequency Technologies (RF) ; 12.1: Coordination and Communication
Abstract In a collaboration between CERN, PSI and Sincrotrone Trieste (ST), a series of four multipurpose X-band accelerating structures has been designed and fabricated. These feature integrated wake field monitors (WFMs), which are used to measure the alignment (offset and tilt) between structure and beam. One structure has recently been installed in the SwissFEL Injector Test facility (SITF) at PSI. The WFM front end electronics will be developed within the EuCard2 framework, so for the measurements described in this paper we used the raw WFM signals. We compare these measurements to the theoretical results obtained via an equivalent circuit model used in the design and numerical calculations. The beam tests show that by minimizing the WFM signals, the emittance dilution given by the transverse wakes, crucial because of the small aperture of the structure, is minimized as well.
Copyright/License publication: © 2013-2024 The Author(s) (License: CC-BY-3.0)

Email contact: [email protected]


 Δημιουργία εγγραφής 2014-05-19, τελευταία τροποποίηση 2022-08-10


Πλήρες κείμενο:
Κατέβασμα πλήρες κειμένου
PDF