Начало > Design and characterization of a prototype stripline beam position monitor for the Clic Drive Beam* |
Preprint | |
Report number | CERN-ATS-2012-280 |
Title | Design and characterization of a prototype stripline beam position monitor for the Clic Drive Beam* |
Author(s) | Benot-Morell, A (CERN ; Valencia U., IFIC) ; Søby, L (CERN) ; Wendt, M (CERN) ; Nappa, J M (Annecy, LAPP) ; Tassan-Viol, J (Annecy, LAPP) ; Vilalte, S (Annecy, LAPP) ; Smith, S (SLAC) |
Publication | 2012 |
Imprint | 01 Oct 2012 |
Number of pages | 3 |
Presented at | International Beam Instrumentation Conference, Tsukuba, Japan, 1 - 4 Oct 2012 |
Subject category | Accelerators and Storage Rings |
Abstract | The prototype of a stripline Beam Position Monitor (BPM) with its associated readout electronics is under development at CERN, in collaboration with SLAC, LAPP and IFIC. The anticipated position resolution and accuracy are expected to be below 2μm and 20μm respectively for operation of the BPM in the CLIC drive beam (DB) linac. This paper describes the particular CLIC DB conditions with respect to the beam position monitoring, presents the measurement concept, and summarizes electromagnetic simulations and RF measurements performed on the prototype. |
Copyright/License | Preprint: © 2012-2024 CERN (License: CC-BY-3.0) |
Submitted by | [email protected] |