CERN Accelerating science

If you experience any problem watching the video, click the download button below
Download Embed
CMS Note
Report number CMS-CR-2012-156
Title Upgrade of the trigger system of CMS
Author(s) Jeitler, Manfred (Vienna, OAW)
Publication 2012
Collaboration CMS Collaboration
Imprint 19 Jun 2012
Number of pages 5
Presented at 12th Pisa Meeting on Advanced Detectors: Frontier Detector for Frontier Physics, La Biodola, Isola d'Elba, Italy, 20 - 26 May 2012
Subject category Detectors and Experimental Techniques
Accelerator/Facility, Experiment CERN LHC ; CMS
Abstract Various parts of the CMS trigger and in particular the Level-1 hardware trigger will be upgraded to cope with increasing luminosity, using more selective trigger conditions at Level-1 and improving the reliability of the system. Many trigger subsystems use FPGAs (Field Programmable Gate Arrays) in the electronics and will benefit from developments in this technology, allowing much more logic into a single FPGA chip, thus reducing the number of chips, electronic boards and interconnections and in this way improving reliability. A number of subsystems plan to switch from the old VME bus to the new microTCA crate standard. Using similar approaches, identical modules and common software whereever possible will reduce costs and manpower requirements and improve the serviceability of the whole trigger system. The computer-farm based High-Level Trigger will not only be extended by using increasing numbers of more powerful PCs but there are also concepts for making it more robust and the software easier to maintain, which will result in better efficiency of the whole system.
Copyright/License Preprint: (License: CC-BY-4.0)

 


 Δημιουργία εγγραφής 2012-06-25, τελευταία τροποποίηση 2018-06-07


Πλήρες κείμενο:
Κατέβασμα πλήρες κειμένου
PDF